user/sven/linux.git/include/linux/interrupt.h, branch v4.13.6

Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-07-09T17:24:46Z

Pull irq fixes from Thomas Gleixner: - A few fixes mopping up the fallout of the big irq overhaul - Move the interrupt resource management logic out of the spin locked, irq disabled region to avoid unnecessary restrictions of the resource callbacks - Preparation for reworking the per cpu irq request function. * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Allow ACPI device nodes to be used as irqdomain identifiers genirq/debugfs: Remove redundant NULL pointer check genirq: Allow to pass the IRQF_TIMER flag with percpu irq request genirq/timings: Move free timings out of spinlocked region genirq: Move irq resource handling out of spinlocked region genirq: Add mutex to irq desc to serialize request/free_irq() genirq: Move bus locking into __setup_irq() genirq: Force inlining of __irq_startup_managed to prevent build failure genirq/debugfs: Fix build for !CONFIG_IRQ_DOMAIN

Merge tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-07-08T22:51:57Z

Pull PCI updates from Bjorn Helgaas: - add sysfs max_link_speed/width, current_link_speed/width (Wong Vee Khee) - make host bridge IRQ mapping much more generic (Matthew Minter, Lorenzo Pieralisi) - convert most drivers to pci_scan_root_bus_bridge() (Lorenzo Pieralisi) - mutex sriov_configure() (Jakub Kicinski) - mutex pci_error_handlers callbacks (Christoph Hellwig) - split ->reset_notify() into ->reset_prepare()/reset_done() (Christoph Hellwig) - support multiple PCIe portdrv interrupts for MSI as well as MSI-X (Gabriele Paoloni) - allocate MSI/MSI-X vector for Downstream Port Containment (Gabriele Paoloni) - fix MSI IRQ affinity pre/post/min_vecs issue (Michael Hernandez) - test INTx masking during enumeration, not at run-time (Piotr Gregor) - avoid using device_may_wakeup() for runtime PM (Rafael J. Wysocki) - restore the status of PCI devices across hibernation (Chen Yu) - keep parent resources that start at 0x0 (Ard Biesheuvel) - enable ECRC only if device supports it (Bjorn Helgaas) - restore PRI and PASID state after Function-Level Reset (CQ Tang) - skip DPC event if device is not present (Keith Busch) - check domain when matching SMBIOS info (Sujith Pandel) - mark Intel XXV710 NIC INTx masking as broken (Alex Williamson) - avoid AMD SB7xx EHCI USB wakeup defect (Kai-Heng Feng) - work around long-standing Macbook Pro poweroff issue (Bjorn Helgaas) - add Switchtec "running" status flag (Logan Gunthorpe) - fix dra7xx incorrect RW1C IRQ register usage (Arvind Yadav) - modify xilinx-nwl IRQ chip for legacy interrupts (Bharat Kumar Gogada) - move VMD SRCU cleanup after bus, child device removal (Jon Derrick) - add Faraday clock handling (Linus Walleij) - configure Rockchip MPS and reorganize (Shawn Lin) - limit Qualcomm TLP size to 2K (hardware issue) (Srinivas Kandagatla) - support Tegra MSI 64-bit addressing (Thierry Reding) - use Rockchip normal (not privileged) register bank (Shawn Lin) - add HiSilicon Kirin SoC PCIe controller driver (Xiaowei Song) - add Sigma Designs Tango SMP8759 PCIe controller driver (Marc Gonzalez) - add MediaTek PCIe host controller support (Ryder Lee) - add Qualcomm IPQ4019 support (John Crispin) - add HyperV vPCI protocol v1.2 support (Jork Loeser) - add i.MX6 regulator support (Quentin Schulz) * tag 'pci-v4.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller PCI: rockchip: Use normal register bank for config accessors dt-bindings: PCI: Add documentation for MediaTek PCIe PCI: Remove __pci_dev_reset() and pci_dev_reset() PCI: Split ->reset_notify() method into ->reset_prepare() and ->reset_done() PCI: xilinx: Make of_device_ids const PCI: xilinx-nwl: Modify IRQ chip for legacy interrupts PCI: vmd: Move SRCU cleanup after bus, child device removal PCI: vmd: Correct comment: VMD domains start at 0x10000, not 0x1000 PCI: versatile: Add local struct device pointers PCI: tegra: Do not allocate MSI target memory PCI: tegra: Support MSI 64-bit addressing PCI: rockchip: Use local struct device pointer consistently PCI: rockchip: Check for clk_prepare_enable() errors during resume MAINTAINERS: Remove Wenrui Li as Rockchip PCIe driver maintainer PCI: rockchip: Configure RC's MPS setting PCI: rockchip: Reconfigure configuration space header type PCI: rockchip: Split out rockchip_pcie_cfg_configuration_accesses() PCI: rockchip: Move configuration accesses into rockchip_pcie_cfg_atu() ...

genirq: Allow to pass the IRQF_TIMER flag with percpu irq request

2017-07-06T21:16:22Z

The irq timings infrastructure tracks when interrupts occur in order to statistically predict te next interrupt event. There is no point to track timer interrupts and try to predict them because the next expiration time is already known. This can be avoided via the IRQF_TIMER flag which is passed by timer drivers in request_irq(). It marks the interrupt as timer based which alloes to ignore these interrupts in the timings code. Per CPU interrupts which are requested via request_percpu_+irq() have no flag argument, so marking per cpu timer interrupts is not possible and they get tracked pointlessly. Add __request_percpu_irq() as a variant of request_percpu_irq() with a flags argument and make request_percpu_irq() an inline wrapper passing flags = 0. The flag parameter is restricted to IRQF_TIMER as all other IRQF_ flags make no sense for per cpu interrupts. The next step is to convert all existing users of request_percpu_irq() and then remove the wrapper and the underscores. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano Signed-off-by: Thomas Gleixner Cc: peterz@infradead.org Cc: nicolas.pitre@linaro.org Cc: vincent.guittot@linaro.org Cc: rafael@kernel.org Link: http://lkml.kernel.org/r/1499344144-3964-1-git-send-email-daniel.lezcano@linaro.org

genirq/timings: Add infrastructure for estimating the next interrupt arrival time

2017-06-24T09:44:39Z

An interrupt behaves with a burst of activity with periodic interval of time followed by one or two peaks of longer interval. As the time intervals are periodic, statistically speaking they follow a normal distribution and each interrupts can be tracked individually. Add a mechanism to compute the statistics on all interrupts, except the timers which are deterministic from a prediction point of view, as their expiry time is known. The goal is to extract the periodicity for each interrupt, with the last timestamp and sum them, so the next event can be predicted to a certain extent. Taking the earliest prediction gives the expected wakeup on the system (assuming a timer won't expire before). Signed-off-by: Daniel Lezcano Signed-off-by: Thomas Gleixner Cc: Nicolas Pitre Cc: Jens Axboe Cc: Hannes Reinecke Cc: Vincent Guittot Cc: "Rafael J . Wysocki" Cc: Peter Zijlstra Cc: Bjorn Helgaas Link: http://lkml.kernel.org/r/1498227072-5980-2-git-send-email-daniel.lezcano@linaro.org

genirq/timings: Add infrastructure to track the interrupt timings

2017-06-24T09:44:11Z

The interrupt framework gives a lot of information about each interrupt. It does not keep track of when those interrupts occur though, which is a prerequisite for estimating the next interrupt arrival for power management purposes. Add a mechanism to record the timestamp for each interrupt occurrences in a per-CPU circular buffer to help with the prediction of the next occurrence using a statistical model. Each CPU can store up to IRQ_TIMINGS_SIZE events , the current value of IRQ_TIMINGS_SIZE is 32. Each event is encoded into a single u64, where the high 48 bits are used for the timestamp and the low 16 bits are for the irq number. A static key is introduced so when the irq prediction is switched off at runtime, the overhead is near to zero. It results in most of the code in internals.h for inline reasons and a very few in the new file timings.c. The latter will contain more in the next patch which will provide the statistical model for the next event prediction. Signed-off-by: Daniel Lezcano Signed-off-by: Thomas Gleixner Acked-by: Nicolas Pitre Cc: Jens Axboe Cc: Hannes Reinecke Cc: Vincent Guittot Cc: "Rafael J . Wysocki" Cc: Peter Zijlstra Cc: Bjorn Helgaas Link: http://lkml.kernel.org/r/1498227072-5980-1-git-send-email-daniel.lezcano@linaro.org

PCI/MSI: Ignore affinity if pre/post vector count is more than min_vecs

2017-05-22T20:06:05Z

min_vecs is the minimum amount of vectors needed to operate in MSI-X mode which may just include the vectors that don't need affinity. Disabling affinity settings causes the qla2xxx driver scsi_add_host() to fail when blk_mq is enabled as the blk_mq_pci_map_queues() expects affinity masks on each vector. Fixes: dfef358bd1be ("PCI/MSI: Don't apply affinity if there aren't enough vectors left") Signed-off-by: Michael Hernandez Signed-off-by: Himanshu Madhani Signed-off-by: Bjorn Helgaas Reviewed-by: Christoph Hellwig Cc: stable@vger.kernel.org # v4.10+

genirq: Return the IRQ name from free_irq()

2017-04-18T18:40:00Z

This allows callers to get back at them instead of having to store it in another variable. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner

genirq/affinity: Handle pre/post vectors in irq_create_affinity_masks()

2016-11-09T07:25:09Z

Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Acked-by: Bjorn Helgaas Acked-by: Jens Axboe Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner

genirq/affinity: Handle pre/post vectors in irq_calc_affinity_vectors()

2016-11-09T07:25:08Z

Only calculate the affinity for the main I/O vectors, and skip the pre or post vectors specified by struct irq_affinity. Also remove the irq_affinity cpumask argument that has never been used. If we ever need it in the future we can pass it through struct irq_affinity. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Acked-by: Jens Axboe Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-3-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner

genirq/affinity: Introduce struct irq_affinity

2016-11-09T07:25:08Z

Some drivers (various network and RDMA adapter for example) have a MSI-X vector layout where most of the vectors are used for I/O queues and should have CPU affinity assigned to them, but some (usually 1 but sometimes more) at the beginning or end are used for low-performance admin or configuration work and should not have any explicit affinity assigned to them. Add a new irq_affinity structure, which will be passed through a variant of pci_irq_alloc_vectors that allows to specify these requirements (and is extensible to any future quirks in that area) so that the core IRQ affinity algorithm can take this quirks into account. Signed-off-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Acked-by: Jens Axboe Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Link: http://lkml.kernel.org/r/1478654107-7384-2-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner