user/sven/linux.git/include/linux/irq.h, branch v5.3.2

genirq: Introduce irq_chip_{request,release}_resource_parent() apis

2019-05-01T09:41:38Z

Introduce irq_chip_{request,release}_resource_parent() apis so that these can be used in hierarchical irqchips. Signed-off-by: Lokesh Vutla Signed-off-by: Marc Zyngier

genirq: Fix typo in comment of IRQD_MOVE_PCNTXT

2019-03-21T10:52:37Z

Signed-off-by: Peter Xu Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Dou Liyang Cc: Julien Thierry Link: https://lkml.kernel.org/r/20190318065123.11862-1-peterx@redhat.com

Merge tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2019-03-08T18:09:53Z

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v5.1 cycle: Core changes: - The big change this time around is the irqchip handling in the qualcomm pin controllers, closely coupled with the gpiochip. This rework, in a classic fall-between-the-chairs fashion has been sidestepped for too long. The Qualcomm IRQchips using the SPMI and SSBI transport mechanisms have been rewritten to use hierarchical irqchip. This creates the base from which I intend to gradually pull support for hierarchical irqchips into the gpiolib irqchip helpers to cut down on duplicate code. We have too many hacks in the kernel because people have been working around the missing hierarchical irqchip for years, and once it was there, noone understood it for a while. We are now slowly adapting to using it. This is why this pull requests include changes to MFD, SPMI, IRQchip core and some ARM Device Trees pertaining to the Qualcomm chip family. Since Qualcomm have so many chips and such large deployments it is paramount that this platform gets this right, and now it (hopefully) does. - Core support for pull-up and pull-down configuration, also from the device tree. When a simple GPIO chip supports an "off or on" pull-up or pull-down resistor, we provide a way to set this up using machine descriptors or device tree. If more elaborate control of pull up/down (such as resistance shunt setting) is required, drivers should be phased over to use pin control. We do not yet provide a userspace ABI for this pull up-down setting but I suspect the makers are going to ask for it soon enough. PCA953x is the first user of this new API. - The GPIO mockup driver has been revamped after some discussion improving the IRQ simulator in the process. The idea is to make it possible to use the mockup for both testing and virtual prototyping, e.g. when you do not yet have a GPIO expander to play with but really want to get something to develop code around before hardware is available. It's neat. The blackbox testing usecase is currently making its way into kernelci. - ACPI GPIO core preserves non direction flags when updating flags. - A new device core helper for devm_platform_ioremap_resource() is funneled through the GPIO tree with Greg's ACK. New drivers: - TQ-Systems QTMX86 GPIO controllers (using port-mapped I/O) - Gateworks PLD GPIO driver (vaccumed up from OpenWrt) - AMD G-Series PCH (Platform Controller Hub) GPIO driver. - Fintek F81804 & F81966 subvariants. - PCA953x now supports NXP PCAL6416. Driver improvements: - IRQ support on the Nintendo Wii (Hollywood) GPIO. - get_direction() support for the MVEBU driver. - Set the right output level on SAMA5D2. - Drop the unused irq trigger setting on the Spreadtrum driver. - Wakeup support for PCA953x. - A slew of cleanups in the various Intel drivers" * tag 'gpio-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (110 commits) gpio: gpio-omap: fix level interrupt idling gpio: amd-fch: Set proper output level for direction_output x86: apuv2: remove unused variable gpio: pca953x: Use PCA_LATCH_INT platform/x86: fix PCENGINES_APU2 Kconfig warning gpio: pca953x: Fix dereference of irq data in shutdown gpio: amd-fch: Fix type error found by sparse gpio: amd-fch: Drop const from resource gpio: mxc: add check to return defer probe if clock tree NOT ready gpio: ftgpio: Register per-instance irqchip gpio: ixp4xx: Add DT bindings x86: pcengines apuv2 gpio/leds/keys platform driver gpio: AMD G-Series PCH gpio driver drivers: depend on HAS_IOMEM for devm_platform_ioremap_resource() gpio: tqmx86: Set proper output level for direction_output gpio: sprd: Change to use SoC compatible string gpio: sprd: Use SoC compatible string instead of wildcard string gpio: of: Handle both enable-gpio{,s} gpio: of: Restrict enable-gpio quirk to regulator-gpio gpio: davinci: use devm_platform_ioremap_resource() ...

genirq: introduce irq_chip_mask_ack_parent()

2019-02-13T08:23:05Z

The hierarchical irqchip never before ran into a situation where the parent is not "simple", i.e. does not implement .irq_ack() and .irq_mask() like most, but the qcom-pm8xxx.c happens to implement only .irq_mask_ack(). Since we want to make ssbi-gpio a hierarchical child of this irqchip, it must *also* only implement .irq_mask_ack() and call down to the parent, and for this we of course need irq_chip_mask_ack_parent(). Cc: Marc Zyngier Cc: Thomas Gleixner Acked-by: Marc Zyngier Signed-off-by: Brian Masney Signed-off-by: Linus Walleij

genirq: Provide NMI handlers

2019-02-05T14:37:01Z

Provide flow handlers that are NMI safe for interrupts and percpu_devid interrupts. Signed-off-by: Julien Thierry Acked-by: Marc Zyngier Cc: Thomas Gleixner Cc: Marc Zyngier Cc: Peter Zijlstra Signed-off-by: Marc Zyngier

genirq: Provide basic NMI management for interrupt lines

2019-02-05T14:36:57Z

Add functionality to allocate interrupt lines that will deliver IRQs as Non-Maskable Interrupts. These allocations are only successful if the irqchip provides the necessary support and allows NMI delivery for the interrupt line. Interrupt lines allocated for NMI delivery must be enabled/disabled through enable_nmi/disable_nmi_nosync to keep their state consistent. To treat a PERCPU IRQ as NMI, the interrupt must not be shared nor threaded, the irqchip directly managing the IRQ must be the root irqchip and the irqchip cannot be behind a slow bus. Signed-off-by: Julien Thierry Reviewed-by: Marc Zyngier Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Marc Zyngier Signed-off-by: Marc Zyngier

genirq/core: Introduce struct irq_affinity_desc

2018-12-19T10:32:08Z

The interrupt affinity management uses straight cpumask pointers to convey the automatically assigned affinity masks for managed interrupts. The core interrupt descriptor allocation also decides based on the pointer being non NULL whether an interrupt is managed or not. Devices which use managed interrupts usually have two classes of interrupts: - Interrupts for multiple device queues - Interrupts for general device management Currently both classes are treated the same way, i.e. as managed interrupts. The general interrupts get the default affinity mask assigned while the device queue interrupts are spread out over the possible CPUs. Treating the general interrupts as managed is both a limitation and under certain circumstances a bug. Assume the following situation: default_irq_affinity = 4..7 So if CPUs 4-7 are offlined, then the core code will shut down the device management interrupts because the last CPU in their affinity mask went offline. It's also a limitation because it's desired to allow manual placement of the general device interrupts for various reasons. If they are marked managed then the interrupt affinity setting from both user and kernel space is disabled. To remedy that situation it's required to convey more information than the cpumasks through various interfaces related to interrupt descriptor allocation. Instead of adding yet another argument, create a new data structure 'irq_affinity_desc' which for now just contains the cpumask. This struct can be expanded to convey auxilliary information in the next step. No functional change, just preparatory work. [ tglx: Simplified logic and clarified changelog ] Suggested-by: Thomas Gleixner Suggested-by: Bjorn Helgaas Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: linux-pci@vger.kernel.org Cc: kashyap.desai@broadcom.com Cc: shivasharan.srikanteshwara@broadcom.com Cc: sumit.saxena@broadcom.com Cc: ming.lei@redhat.com Cc: hch@lst.de Cc: douliyang1@huawei.com Link: https://lkml.kernel.org/r/20181204155122.6327-2-douliyangs@gmail.com

irq/matrix: Spread managed interrupts on allocation

2018-09-18T16:27:24Z

Linux spreads out the non managed interrupt across the possible target CPUs to avoid vector space exhaustion. Managed interrupts are treated differently, as for them the vectors are reserved (with guarantee) when the interrupt descriptors are initialized. When the interrupt is requested a real vector is assigned. The assignment logic uses the first CPU in the affinity mask for assignment. If the interrupt has more than one CPU in the affinity mask, which happens when a multi queue device has less queues than CPUs, then doing the same search as for non managed interrupts makes sense as it puts the interrupt on the least interrupt plagued CPU. For single CPU affine vectors that's obviously a NOOP. Restructre the matrix allocation code so it does the 'best CPU' search, add the sanity check for an empty affinity mask and adapt the call site in the x86 vector management code. [ tglx: Added the empty mask check to the core and improved change log ] Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.com

genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug

2018-06-22T12:22:00Z

Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs slightly less useful. Take this opportunity to also add a missing comment in the definition of IRQCHIP_SUPPORTS_LEVEL_MSI. Fixes: 6988e0e0d283 ("genirq/msi: Limit level-triggered MSI to platform devices") Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: Jason Cooper Cc: Alexandre Belloni Cc: Yang Yingliang Cc: Sumit Garg Link: https://lkml.kernel.org/r/20180622095254.5906-2-marc.zyngier@arm.com

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-06-10T16:44:53Z

Pull x86 updates and fixes from Thomas Gleixner: - Fix the (late) fallout from the vector management rework causing hlist corruption and irq descriptor reference leaks caused by a missing sanity check. The straight forward fix triggered another long standing issue to surface. The pre rework code hid the issue due to being way slower, but now the chance that user space sees an EBUSY error return when updating irq affinities is way higher, though quite a bunch of userspace tools do not handle it properly despite the fact that EBUSY could be returned for at least 10 years. It turned out that the EBUSY return can be avoided completely by utilizing the existing delayed affinity update mechanism for irq remapped scenarios as well. That's a bit more error handling in the kernel, but avoids fruitless fingerpointing discussions with tool developers. - Decouple PHYSICAL_MASK from AMD SME as its going to be required for the upcoming Intel memory encryption support as well. - Handle legacy device ACPI detection properly for newer platforms - Fix the wrong argument ordering in the vector allocation tracepoint - Simplify the IDT setup code for the APIC=n case - Use the proper string helpers in the MTRR code - Remove a stale unused VDSO source file - Convert the microcode update lock to a raw spinlock as its used in atomic context. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Enable CMT and MBM on new Skylake stepping x86/apic/vector: Print APIC control bits in debugfs genirq/affinity: Defer affinity setting if irq chip is busy x86/platform/uv: Use apic_ack_irq() x86/ioapic: Use apic_ack_irq() irq_remapping: Use apic_ack_irq() x86/apic: Provide apic_ack_irq() genirq/migration: Avoid out of line call if pending is not set genirq/generic_pending: Do not lose pending affinity update x86/apic/vector: Prevent hlist corruption and leaks x86/vector: Fix the args of vector_alloc tracepoint x86/idt: Simplify the idt_setup_apic_and_irq_gates() x86/platform/uv: Remove extra parentheses x86/mm: Decouple dynamic __PHYSICAL_MASK from AMD SME x86: Mark native_set_p4d() as __always_inline x86/microcode: Make the late update update_lock a raw lock for RT x86/mtrr: Convert to use strncpy_from_user() helper x86/mtrr: Convert to use match_string() helper x86/vdso: Remove unused file x86/i8237: Register device based on FADT legacy boot flag