user/sven/linux.git/include/linux/kexec.h, branch v3.18.108

kexec: allocate the kexec control page with KEXEC_CONTROL_MEMORY_GFP

2015-08-27T17:26:05Z

[ Upstream commit 7e01b5acd88b3f3108d8c4ce44e3205d67437202 ] Introduce KEXEC_CONTROL_MEMORY_GFP to allow the architecture code to override the gfp flags of the allocation for the kexec control page. The loop in kimage_alloc_normal_control_pages allocates pages with GFP_KERNEL until a page is found that happens to have an address smaller than the KEXEC_CONTROL_MEMORY_LIMIT. On systems with a large memory size but a small KEXEC_CONTROL_MEMORY_LIMIT the loop will keep allocating memory until the oom killer steps in. Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

kexec: take the segment adding out of locate_mem_hole functions

2014-10-14T00:18:21Z

In locate_mem_hole functions, a memory hole is located and added as kexec_segment. But from the name of locate_mem_hole, it should only take responsibility of searching a available memory hole to contain data of a specified size. So in this patch add a new field 'mem' into kexec_buf, then take that kexec segment adding code out of locate_mem_hole_top_down and locate_mem_hole_bottom_up. This make clear of the functionality of locate_mem_hole just like it declars to do. And by this locate_mem_hole_callback chould be used later if anyone want to locate a memory hole for other use. Meanwhile Vivek suggested opening code function __kexec_add_segment(), that way we have to retreive ksegment pointer once and it is easy to read. So just do it in this patch and remove __kexec_add_segment() since no one use it anymore. Signed-off-by: Baoquan He Acked-by: Vivek Goyal Cc: Eric W. Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec: verify the signature of signed PE bzImage

2014-08-08T22:57:33Z

This is the final piece of the puzzle of verifying kernel image signature during kexec_file_load() syscall. This patch calls into PE file routines to verify signature of bzImage. If signature are valid, kexec_file_load() succeeds otherwise it fails. Two new config options have been introduced. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. I tested these patches with both "pesign" and "sbsign" signed bzImages. I used signing_key.priv key and signing_key.x509 cert for signing as generated during kernel build process (if module signing is enabled). Used following method to sign bzImage. pesign ====== - Convert DER format cert to PEM format cert openssl x509 -in signing_key.x509 -inform DER -out signing_key.x509.PEM -outform PEM - Generate a .p12 file from existing cert and private key file openssl pkcs12 -export -out kernel-key.p12 -inkey signing_key.priv -in signing_key.x509.PEM - Import .p12 file into pesign db pk12util -i /tmp/kernel-key.p12 -d /etc/pki/pesign - Sign bzImage pesign -i /boot/vmlinuz-3.16.0-rc3+ -o /boot/vmlinuz-3.16.0-rc3+.signed.pesign -c "Glacier signing key - Magrathea" -s sbsign ====== sbsign --key signing_key.priv --cert signing_key.x509.PEM --output /boot/vmlinuz-3.16.0-rc3+.signed.sbsign /boot/vmlinuz-3.16.0-rc3+ Patch details: Well all the hard work is done in previous patches. Now bzImage loader has just call into that code and verify whether bzImage signature are valid or not. Also create two config options. First one is CONFIG_KEXEC_VERIFY_SIG. This option enforces that kernel has to be validly signed otherwise kernel load will fail. If this option is not set, no signature verification will be done. Only exception will be when secureboot is enabled. In that case signature verification should be automatically enforced when secureboot is enabled. But that will happen when secureboot patches are merged. Second config option is CONFIG_KEXEC_BZIMAGE_VERIFY_SIG. This option enables signature verification support on bzImage. If this option is not set and previous one is set, kernel image loading will fail because kernel does not have support to verify signature of bzImage. Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Cc: Matt Fleming Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec-bzImage64: support for loading bzImage using 64bit entry

2014-08-08T22:57:33Z

This is loader specific code which can load bzImage and set it up for 64bit entry. This does not take care of 32bit entry or real mode entry. 32bit mode entry can be implemented if somebody needs it. Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec: load and relocate purgatory at kernel load time

2014-08-08T22:57:32Z

Load purgatory code in RAM and relocate it based on the location. Relocation code has been inspired by module relocation code and purgatory relocation code in kexec-tools. Also compute the checksums of loaded kexec segments and store them in purgatory. Arch independent code provides this functionality so that arch dependent bootloaders can make use of it. Helper functions are provided to get/set symbol values in purgatory which are used by bootloaders later to set things like stack and entry point of second kernel etc. Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec: implementation of new syscall kexec_file_load

2014-08-08T22:57:32Z

Previous patch provided the interface definition and this patch prvides implementation of new syscall. Previously segment list was prepared in user space. Now user space just passes kernel fd, initrd fd and command line and kernel will create a segment list internally. This patch contains generic part of the code. Actual segment preparation and loading is done by arch and image specific loader. Which comes in next patch. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec: make kexec_segment user buffer pointer a union

2014-08-08T22:57:32Z

So far kexec_segment->buf was always a user space pointer as user space passed the array of kexec_segment structures and kernel copied it. But with new system call, list of kexec segments will be prepared by kernel and kexec_segment->buf will point to a kernel memory. So while I was adding code where I made assumption that ->buf is pointing to kernel memory, sparse started giving warning. Make ->buf a union. And where a user space pointer is expected, access it using ->buf and where a kernel space pointer is expected, access it using ->kbuf. That takes care of sparse warnings. Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec: rename unusebale_pages to unusable_pages

2014-08-08T22:57:32Z

Let's use the more common "unusable". This patch was originally written and posted by Boris. I am including it in this patch series. Signed-off-by: Borislav Petkov Signed-off-by: Vivek Goyal Cc: Borislav Petkov Cc: Michael Kerrisk Cc: Yinghai Lu Cc: Eric Biederman Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Greg Kroah-Hartman Cc: Dave Young Cc: WANG Chao Cc: Baoquan He Cc: Andy Lutomirski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

kexec/compat: convert to COMPAT_SYSCALL_DEFINE with changing parameter types

2014-03-06T15:30:46Z

In order to allow the COMPAT_SYSCALL_DEFINE macro generate code that performs proper zero and sign extension convert all 64 bit parameters to their corresponding 32 bit compat counterparts. Signed-off-by: Heiko Carstens

kexec: add sysctl to disable kexec_load

2014-01-24T00:37:03Z

For general-purpose (i.e. distro) kernel builds it makes sense to build with CONFIG_KEXEC to allow end users to choose what kind of things they want to do with kexec. However, in the face of trying to lock down a system with such a kernel, there needs to be a way to disable kexec_load (much like module loading can be disabled). Without this, it is too easy for the root user to modify kernel memory even when CONFIG_STRICT_DEVMEM and modules_disabled are set. With this change, it is still possible to load an image for use later, then disable kexec_load so the image (or lack of image) can't be altered. The intention is for using this in environments where "perfect" enforcement is hard. Without a verified boot, along with verified modules, and along with verified kexec, this is trying to give a system a better chance to defend itself (or at least grow the window of discoverability) against attack in the face of a privilege escalation. In my mind, I consider several boot scenarios: 1) Verified boot of read-only verified root fs loading fd-based verification of kexec images. 2) Secure boot of writable root fs loading signed kexec images. 3) Regular boot loading kexec (e.g. kcrash) image early and locking it. 4) Regular boot with no control of kexec image at all. 1 and 2 don't exist yet, but will soon once the verified kexec series has landed. 4 is the state of things now. The gap between 2 and 4 is too large, so this change creates scenario 3, a middle-ground above 4 when 2 and 1 are not possible for a system. Signed-off-by: Kees Cook Acked-by: Rik van Riel Cc: Vivek Goyal Cc: Eric Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds