user/sven/linux.git/include/linux/kvm_host.h, branch v5.18.3

KVM: SEV: add cache flush to solve SEV cache incoherency issues

2022-04-21T19:41:00Z

Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: stable@vger.kernel.org Suggested-by: Sean Christpherson Reported-by: Mingwei Zhang Signed-off-by: Mingwei Zhang Message-Id: <20220421031407.2516575-4-mizhang@google.com> Signed-off-by: Paolo Bonzini

KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abused

2022-04-21T17:16:11Z

Add wrappers to acquire/release KVM's SRCU lock when stashing the index in vcpu->src_idx, along with rudimentary detection of illegal usage, e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the SRCU index is (currently) either 0 or 1, illegal nesting bugs can go unnoticed for quite some time and only cause problems when the nested lock happens to get a different index. Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will likely yell so loudly that it will bring the kernel to its knees. Signed-off-by: Sean Christopherson Tested-by: Fabiano Rosas Message-Id: <20220415004343.2203171-4-seanjc@google.com> Signed-off-by: Paolo Bonzini

KVM: Remove dirty handling from gfn_to_pfn_cache completely

2022-04-02T09:34:41Z

It isn't OK to cache the dirty status of a page in internal structures for an indefinite period of time. Any time a vCPU exits the run loop to userspace might be its last; the VMM might do its final check of the dirty log, flush the last remaining dirty pages to the destination and complete a live migration. If we have internal 'dirty' state which doesn't get flushed until the vCPU is finally destroyed on the source after migration is complete, then we have lost data because that will escape the final copy. This problem already exists with the use of kvm_vcpu_unmap() to mark pages dirty in e.g. VMX nesting. Note that the actual Linux MM already considers the page to be dirty since we have a writeable mapping of it. This is just about the KVM dirty logging. For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to track which gfn_to_pfn_caches have been used and explicitly mark the corresponding pages dirty before returning to userspace. But we would have needed external tracking of that anyway, rather than walking the full list of GPCs to find those belonging to this vCPU which are dirty. So let's rely *solely* on that external tracking, and keep it simple rather than laying a tempting trap for callers to fall into. Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini

KVM: Use enum to track if cached PFN will be used in guest and/or host

2022-04-02T09:34:41Z

Replace the guest_uses_pa and kernel_map booleans in the PFN cache code with a unified enum/bitmask. Using explicit names makes it easier to review and audit call sites. Opportunistically add a WARN to prevent passing garbage; instantating a cache without declaring its usage is either buggy or pointless. Signed-off-by: Sean Christopherson Signed-off-by: David Woodhouse Signed-off-by: Paolo Bonzini Message-Id: <20220303154127.202856-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini

KVM: Don't actually set a request when evicting vCPUs for GFN cache invd

2022-04-02T09:34:39Z

Don't actually set a request bit in vcpu->requests when making a request purely to force a vCPU to exit the guest. Logging a request but not actually consuming it would cause the vCPU to get stuck in an infinite loop during KVM_RUN because KVM would see the pending request and bail from VM-Enter to service the request. Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init() without implementing handling of the request, especially since getting test coverage of MMU notifier interaction with specific KVM features usually requires a directed test. Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus to evict_vcpus. The purpose of the request is to get vCPUs out of guest mode, it's supposed to _avoid_ waking vCPUs that are blocking. Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to what it wants to accomplish, and to genericize the name so that it can used for similar but unrelated scenarios, should they arise in the future. Add a comment and documentation to explain why the "no action" request exists. Add compile-time assertions to help detect improper usage. Use the inner assertless helper in the one s390 path that makes requests without a hardcoded request. Cc: David Woodhouse Signed-off-by: Sean Christopherson Message-Id: <20220223165302.3205276-1-seanjc@google.com> Signed-off-by: Paolo Bonzini

KVM: Drop KVM_REQ_MMU_RELOAD and update vcpu-requests.rst documentation

2022-03-01T13:58:26Z

Remove the now unused KVM_REQ_MMU_RELOAD, shift KVM_REQ_VM_DEAD into the unoccupied space, and update vcpu-requests.rst, which was missing an entry for KVM_REQ_VM_DEAD. Switching KVM_REQ_VM_DEAD to entry '1' also fixes the stale comment about bits 4-7 being reserved. Reviewed-by: Claudio Imbrenda Signed-off-by: Sean Christopherson Reviewed-by: Ben Gardon Message-Id: <20220225182248.3812651-7-seanjc@google.com> Signed-off-by: Paolo Bonzini

KVM: Drop kvm_reload_remote_mmus(), open code request in x86 users

2022-03-01T13:58:25Z

Remove the generic kvm_reload_remote_mmus() and open code its functionality into the two x86 callers. x86 is (obviously) the only architecture that uses the hook, and is also the only architecture that uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That will change in a future patch, as x86's usage when zapping a single shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only MMUs whose root is being zapped actually need to be reloaded. s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose. Drop the generic code in anticipation of implementing s390 and x86 arch specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely. Opportunistically reword the x86 TDP MMU comment to avoid making references to functions (and requests!) when possible, and to remove the rather ambiguous "this". No functional change intended. Cc: Ben Gardon Signed-off-by: Sean Christopherson Reviewed-by: Ben Gardon Message-Id: <20220225182248.3812651-4-seanjc@google.com> Signed-off-by: Paolo Bonzini

Merge tag 'kvmarm-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

2022-02-05T05:58:25Z

KVM/arm64 fixes for 5.17, take #2 - A couple of fixes when handling an exception while a SError has been delivered - Workaround for Cortex-A510's single-step[ erratum

kvm: add guest_state_{enter,exit}_irqoff()

2022-02-01T13:51:18Z

When transitioning to/from guest mode, it is necessary to inform lockdep, tracing, and RCU in a specific order, similar to the requirements for transitions to/from user mode. Additionally, it is necessary to perform vtime accounting for a window around running the guest, with RCU enabled, such that timer interrupts taken from the guest can be accounted as guest time. Most architectures don't handle all the necessary pieces, and a have a number of common bugs, including unsafe usage of RCU during the window between guest_enter() and guest_exit(). On x86, this was dealt with across commits: 87fa7f3e98a1310e ("x86/kvm: Move context tracking where it belongs") 0642391e2139a2c1 ("x86/kvm/vmx: Add hardirq tracing to guest enter/exit") 9fc975e9efd03e57 ("x86/kvm/svm: Add hardirq tracing on guest enter/exit") 3ebccdf373c21d86 ("x86/kvm/vmx: Move guest enter/exit into .noinstr.text") 135961e0a7d555fc ("x86/kvm/svm: Move guest enter/exit into .noinstr.text") 160457140187c5fb ("KVM: x86: Defer vtime accounting 'til after IRQ handling") bc908e091b326467 ("KVM: x86: Consolidate guest enter/exit logic to common helpers") ... but those fixes are specific to x86, and as the resulting logic (while correct) is split across generic helper functions and x86-specific helper functions, it is difficult to see that the entry/exit accounting is balanced. This patch adds generic helpers which architectures can use to handle guest entry/exit consistently and correctly. The guest_{enter,exit}() helpers are split into guest_timing_{enter,exit}() to perform vtime accounting, and guest_context_{enter,exit}() to perform the necessary context tracking and RCU management. The existing guest_{enter,exit}() heleprs are left as wrappers of these. Atop this, new guest_state_enter_irqoff() and guest_state_exit_irqoff() helpers are added to handle the ordering of lockdep, tracing, and RCU manageent. These are inteneded to mirror exit_to_user_mode() and enter_from_user_mode(). Subsequent patches will migrate architectures over to the new helpers, following a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); This sequences handles all of the above correctly, and more clearly balances the entry and exit portions, making it easier to understand. The existing helpers are marked as deprecated, and will be removed once all architectures have been converted. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland Reviewed-by: Marc Zyngier Reviewed-by: Paolo Bonzini Reviewed-by: Nicolas Saenz Julienne Message-Id: <20220201132926.3301912-2-mark.rutland@arm.com> Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2022-01-22T07:40:01Z

Pull more kvm updates from Paolo Bonzini: "Generic: - selftest compilation fix for non-x86 - KVM: avoid warning on s390 in mark_page_dirty x86: - fix page write-protection bug and improve comments - use binary search to lookup the PMU event filter, add test - enable_pmu module parameter support for Intel CPUs - switch blocked_vcpu_on_cpu_lock to raw spinlock - cleanups of blocked vCPU logic - partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression) - various small fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits) docs: kvm: fix WARNINGs from api.rst selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c kvm: selftests: Do not indent with spaces kvm: selftests: sync uapi/linux/kvm.h with Linux header selftests: kvm: add amx_test to .gitignore KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops KVM: SVM: Drop AVIC's intermediate avic_set_running() helper KVM: VMX: Don't do full kick when handling posted interrupt wakeup KVM: VMX: Fold fallback path into triggering posted IRQ helper KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ KVM: VMX: Don't do full kick when triggering posted interrupt "fails" KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers ...