user/sven/linux.git/include/linux/libata.h, branch v3.12.19

libata: disable LPM for some WD SATA-I devices

2014-02-06T19:22:19Z

commit ecd75ad514d73efc1bbcc5f10a13566c3ace5f53 upstream. For some reason, some early WD drives spin up and down drives erratically when the link is put into slumber mode which can reduce the life expectancy of the device significantly. Unfortunately, we don't have full list of devices and given the nature of the issue it'd be better to err on the side of false positives than the other way around. Let's disable LPM on all WD devices which match one of the known problematic model prefixes and are SATA-I. As horkage list doesn't support matching SATA capabilities, this is implemented as two horkages - WD_BROKEN_LPM and NOLPM. The former is set for the known prefixes and sets the latter if the matched device is SATA-I. Note that this isn't optimal as this disables all LPM operations and partial link power state reportedly works fine on these; however, the way LPM is implemented in libata makes it difficult to precisely map libata LPM setting to specific link power state. Well, these devices are already fairly outdated. Let's just disable whole LPM for now. Signed-off-by: Tejun Heo Reported-and-tested-by: Nikos Barkas Reported-and-tested-by: Ioannis Barkas References: https://bugzilla.kernel.org/show_bug.cgi?id=57211 Signed-off-by: Greg Kroah-Hartman

libata: implement ATA_HORKAGE_NO_NCQ_TRIM and apply it to Micro M500 SSDs

2014-01-09T20:25:12Z

commit f78dea064c5f7de07de4912a6e5136dbc443d614 upstream. Certain drives cannot handle queued TRIM commands properly, even though support is indicated in the IDENTIFY DEVICE buffer. This patch allows for disabling the commands for the affected drives and apply it to the Micron/Crucial M500 SSDs which exhibit incorrect protocol behavior when issued queued TRIM commands, which could lead to silent data corruption. tj: Merged two unnecessarily split patches and made minor edits including shortening horkage name. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo Link: http://lkml.kernel.org/g/1387246554-7311-1-git-send-email-marc.ceeeee@gmail.com Signed-off-by: Greg Kroah-Hartman

libata: Add support for queued DSM TRIM

2013-08-25T13:39:12Z

Some new SSDs support the queued version of the DSM TRIM command. Let the driver use the new command if supported. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Add support for SEND/RECEIVE FPDMA QUEUED

2013-08-25T13:39:12Z

Add support for the following ATA opcodes, which are present in SATA 3.1 and T13 ATA ACS-3: SEND FPDMA QUEUED RECEIVE FPDMA QUEUED Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Add H2D FIS "auxiliary" port flag

2013-08-25T13:39:12Z

Add a new port flag, ATA_FLAG_FPDMA_AUX, used to indicate support for transmission of the H2D FIS 'auxiliary' field. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

libata: Populate host-to-device FIS "auxiliary" field

2013-08-25T13:39:11Z

SATA 3.1 added an "auxiliary" field to the host-to-device FIS. Populate the host-to-device FIS with the new field via the taskfile struct. Signed-off-by: Marc Carino Signed-off-by: Tejun Heo

ata: acpi: rework the ata acpi bind support

2013-08-23T16:09:23Z

Binding ACPI handle to SCSI device has several drawbacks, namely: 1 During ATA device initialization time, ACPI handle will be needed while SCSI devices are not created yet. So each time ACPI handle is needed, instead of retrieving the handle by ACPI_HANDLE macro, a namespace scan is performed to find the handle for the corresponding ATA device. This is inefficient, and also expose a restriction on calling path not holding any lock. 2 The binding to SCSI device tree makes code complex, while at the same time doesn't bring us any benefit. All ACPI handlings are still done in ATA module, not in SCSI. Rework the ATA ACPI binding code to bind ACPI handle to ATA transport devices(ATA port and ATA device). The binding needs to be done only once, since the ATA transport devices do not go away with hotplug. And due to this, the flush_work call in hotplug handler for ATA bay is no longer needed. Tested on an Intel test platform for binding and runtime power off for ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot and S3, where its SATA port node has _SDD and _GTF control methods when configured as an AHCI controller and its PATA device node has _GTF control method when configured as an IDE controller. SATA PMP binding and ATA hotplug is not tested. Signed-off-by: Aaron Lu Tested-by: Dirk Griesbach Signed-off-by: Tejun Heo

libata: move 'struct ata_taskfile' and friends from ata.h to libata.h

2013-07-16T11:46:56Z

Move 'struct ata_taskfile', ata_prot_flags() and their friends from to . They were misplaced from the beginning, as should cover ATA/ATAPI and related standards only -- to which the aforementioned structure and function have only remote relation. I would have moved 'enum ata_tf_protocols' closely related to 'struct ata_taskfile' but it unfortunately gets used by 'drivers/ide/ide-ioctls.c'... Signed-off-by: Sergei Shtylyov Signed-off-by: Tejun Heo

ahci: make ahci_transmit_led_message into a function pointer

2013-06-06T21:05:23Z

Create a new ata_port_operations function pointer called transmit_led_message and give it the default value of ahci_transmit_led_message. This allows AHCI controllers with non-standard LED interfaces to use the existing em_ interface. Signed-off-by: Mark Langsdorf Signed-off-by: Tejun Heo

libata: Add atapi_dmadir force flag

2013-05-21T23:34:34Z

Some device require DMADIR to be enabled, but are not detected as such by atapi_id_dmadir. One such example is "Asus Serillel 2" SATA-host-to-PATA-device bridge: the bridge itself requires DMADIR, even if the bridged device does not. As atapi_dmadir module parameter can cause problems with some devices (as per Tejun Heo's memory), enabling it globally may not be possible depending on the hardware. This patch adds atapi_dmadir in the form of a "force" horkage value, allowing global, per-bus and per-device control. Signed-off-by: Vincent Pelletier Signed-off-by: Tejun Heo