user/sven/linux.git/include/linux/libata.h, branch v3.5-rc2

libata: add a host flag to ignore detected ATA devices

2012-05-07T19:32:23Z

Where devices are visible via more than one host we sometimes wish to indicate that cirtain devices should be ignored on a specific host. Add a host flag indicating that this host wishes to ignore ATA specific devices. Signed-off-by: Andy Whitcroft Signed-off-by: Jeff Garzik

[SCSI] libsas, libata: fix start of life for a sas ata_port

2012-04-23T11:11:47Z

This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [] sas_ata_end_eh+0x12/0x5e [libsas] ... [] sas_unregister_common_dev+0x78/0xc9 [libsas] [] sas_unregister_dev+0x4f/0xad [libsas] [] sas_unregister_domain_devices+0x7f/0xbf [libsas] [] sas_deform_port+0x61/0x1b8 [libsas] [] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley

[SCSI] libsas: async ata scanning

2012-02-29T21:35:41Z

libsas ata error handling is already async but this does not help the scan case. Move initial link recovery out from under host->scan_mutex, and delay synchronization with eh until after all port probe/recovery work has been queued. Device ordering is maintained with scan order by still calling sas_rphy_add() in order of domain discovery. Since we now scan the domain list when invoking libata-eh we need to be careful to check for fully initialized ata ports. Acked-by: Jack Wang Acked-by: Jeff Garzik Signed-off-by: Dan Williams Signed-off-by: James Bottomley

[SCSI] libsas: execute transport link resets with libata-eh via host workqueue

2012-02-19T20:13:51Z

Link resets leave ata affiliations intact, so arrange for libsas to make an effort to avoid dropping the device due to a slow-to-recover link. Towards this end carry out reset in the host workqueue so that it can check for ata devices and kick the reset request to libata. Hard resets, in contrast, bypass libata since they are meant for associating an ata device with another initiator in the domain (tears down affiliations). Need to add a new transport_sas_phy_reset() since the current sas_phy_reset() is a utility function to libsas lldds. They are not prepared for it to loop back into eh. Signed-off-by: Dan Williams Signed-off-by: James Bottomley

treewide: use printf not attribute__((format(printf,...)))

2011-11-01T00:30:54Z

Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*$\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*$\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches Cc: "Kirill A. Shutemov" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

[SCSI] libsas,libata: fix ->change_queue_{depth|type} for sata devices

2011-10-02T17:30:30Z

Pass queue_depth change requests to libata, and prevent queue_type changes for ATA devices. Otherwise: 1/ we do not honor the libata specific restrictions on the queue depth 2/ libsas drivers that do not set sdev->tagged_supported are unable to change the queue_depth of ata devices via sysfs Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley

ata: Add and use ata_print_version_once

2011-07-23T21:57:36Z

Use a single mechanism to show driver version. Reduces text a tiny bit too. Remove uses of static int printed_version Add and use ata_print_version(const struct device *, const char *ver) and ata_print_version_once. $ size drivers/ata/built-in.* text data bss dec hex filename 544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o 543870 73893 116592 734355 b34ad drivers/ata/built-in.allyesconfig.print_once.o 141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o 141212 14689 4220 160121 27179 drivers/ata/built-in.defconfig.print_once.o Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik

ata: Convert ata__printk(KERN_ to ata__

2011-07-23T21:57:36Z

Saves text by removing nearly duplicated text format strings by creating ata__printk functions and printf extension %pV. ata defconfig size shrinks ~5% (~8KB), allyesconfig ~2.5% (~13KB) Format string duplication comes from: #define ata_link_printk(link, lv, fmt, args...) do { \ if (sata_pmp_attached((link)->ap) || (link)->ap->slave_link) \ printk("%sata%u.%02u: "fmt, lv, (link)->ap->print_id, \ (link)->pmp , ##args); \ else \ printk("%sata%u: "fmt, lv, (link)->ap->print_id , ##args); \ } while(0) Coalesce long formats. $ size drivers/ata/built-in.* text data bss dec hex filename 544969 73893 116584 735446 b38d6 drivers/ata/built-in.allyesconfig.ata.o 558429 73893 117864 750186 b726a drivers/ata/built-in.allyesconfig.dev_level.o 141328 14689 4220 160237 271ed drivers/ata/built-in.defconfig.ata.o 149567 14689 4220 168476 2921c drivers/ata/built-in.defconfig.dev_level.o Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik

libata: Power off empty ports

2011-05-20T00:50:53Z

Give users the option of completely powering off unoccupied SATA ports using the existing min_power link_power_management_policy option. When the use selects this option on an empty port, we will power the port off by setting DET to off. For occupied ports, behavior is unchanged. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik

libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65

2011-04-24T15:32:16Z

NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo Reported-by: Stefan Bader Cc: stable@kernel.org Signed-off-by: Jeff Garzik