user/sven/linux.git/include/linux/libata.h, branch v3.9

libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive

2013-04-03T23:33:43Z

The Slimtype DVD A DS8A8SH drive locks up when max sector is smaller than 65535, and the blow backtrace is observed on locking up: INFO: task flush-8:32:1130 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:32 D ffffffff8180cf60 0 1130 2 0x00000000 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000 Call Trace: [] schedule+0x5d/0x70 [] io_schedule+0x8c/0xd0 [] get_request+0x731/0x7d0 [] ? cfq_allow_merge+0x50/0x90 [] ? wake_up_bit+0x40/0x40 [] ? bio_attempt_back_merge+0x33/0x110 [] blk_queue_bio+0x23a/0x3f0 [] generic_make_request+0xc6/0x120 [] submit_bio+0x138/0x160 [] ? bio_alloc_bioset+0x96/0x120 [] submit_bh+0x1f1/0x220 [] __block_write_full_page+0x228/0x340 [] ? attach_nobh_buffers+0xc0/0xc0 [] ? I_BDEV+0x10/0x10 [] ? I_BDEV+0x10/0x10 [] block_write_full_page_endio+0xe6/0x100 [] block_write_full_page+0x15/0x20 [] blkdev_writepage+0x18/0x20 [] __writepage+0x17/0x40 [] write_cache_pages+0x34a/0x4a0 [] ? set_page_dirty+0x70/0x70 [] generic_writepages+0x51/0x80 [] do_writepages+0x20/0x50 [] __writeback_single_inode+0xa6/0x2b0 [] writeback_sb_inodes+0x311/0x4d0 [] __writeback_inodes_wb+0x86/0xd0 [] wb_writeback+0x1a3/0x330 [] ? _raw_spin_lock_irqsave+0x3f/0x50 [] ? get_nr_inodes+0x52/0x70 [] wb_do_writeback+0x1dc/0x260 [] ? schedule_timeout+0x204/0x240 [] bdi_writeback_thread+0x102/0x2b0 [] ? wb_do_writeback+0x260/0x260 [] kthread+0xc0/0xd0 [] ? kthread_worker_fn+0x1b0/0x1b0 [] ret_from_fork+0x7c/0xb0 [] ? kthread_worker_fn+0x1b0/0x1b0 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" It was previously working by accident, since another bug introduced by 4dce8ba94c7 (libata: Use 'bool' return value for ata_id_XXX) caused all drives to use maxsect=65535. Cc: stable@vger.kernel.org Signed-off-by: Shan Hai Signed-off-by: Jeff Garzik

Revert "libata: export host controller number thru /sys"

2013-01-25T20:30:23Z

This reverts commit 1757d902b029a29dfcef63609964385cf8865b5a. Discussion continues upstream.

libata: identify and init ZPODD devices

2013-01-21T20:40:35Z

The ODD can be enabled for ZPODD if the following three conditions are satisfied: 1 The ODD supports device attention; 2 The platform can runtime power off the ODD through ACPI; 3 The ODD is either slot type or drawer type. For such ODDs, zpodd_init is called and a new structure is allocated for it to store ZPODD related stuffs. And the zpodd_dev_enabled function is used to test if ZPODD is currently enabled for this ODD. A new config CONFIG_SATA_ZPODD is added to selectively build ZPODD code. Signed-off-by: Aaron Lu Acked-by: Tejun Heo Signed-off-by: Jeff Garzik

libata: export host controller number thru /sys

2013-01-14T18:31:21Z

As low-level drivers register their host controller(s), keep track of the number of controllers and export thru /sys in a format so that udev can better match up port numbers with a specific controller. # pwd /sys/devices/pci0000:00 # find . -name 'ata*' -print (2nd controller with port multiplier attached) ./0000:00:1e.0/0000:05:01.0/ata2.7 ./0000:00:1e.0/0000:05:01.0/ata2.7/link7/dev7.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/dev7.0.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.0/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/dev7.1.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.1/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/dev7.2.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.2/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/dev7.3.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.3/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/dev7.4.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.4/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/dev7.5.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.5/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/dev7.6.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.6/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/dev7.7.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.7/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/dev7.8.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.8/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/dev7.9.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.9/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port ./0000:00:1e.0/0000:05:01.0/ata2.7/ata_port/ata2.7 ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/dev7.10.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.10/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/dev7.11.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.11/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/dev7.12.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.12/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/dev7.13.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.13/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/dev7.14.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.7/link7.14/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.8 ./0000:00:1e.0/0000:05:01.0/ata2.8/link8/dev8.0/ata_device ./0000:00:1e.0/0000:05:01.0/ata2.8/link8/ata_link ./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port ./0000:00:1e.0/0000:05:01.0/ata2.8/ata_port/ata2.8 (1st controller) ./0000:00:1f.2/ata1.1 ./0000:00:1f.2/ata1.1/link1/dev1.0/ata_device ./0000:00:1f.2/ata1.1/link1/ata_link ./0000:00:1f.2/ata1.1/ata_port ./0000:00:1f.2/ata1.1/ata_port/ata1.1 ./0000:00:1f.2/ata1.2 ./0000:00:1f.2/ata1.2/link2/dev2.0/ata_device ./0000:00:1f.2/ata1.2/link2/ata_link ./0000:00:1f.2/ata1.2/ata_port ./0000:00:1f.2/ata1.2/ata_port/ata1.2 ./0000:00:1f.2/ata1.3 ./0000:00:1f.2/ata1.3/link3/dev3.0/ata_device ./0000:00:1f.2/ata1.3/link3/ata_link ./0000:00:1f.2/ata1.3/ata_port ./0000:00:1f.2/ata1.3/ata_port/ata1.3 ./0000:00:1f.2/ata1.4 ./0000:00:1f.2/ata1.4/link4/dev4.0/ata_device ./0000:00:1f.2/ata1.4/link4/ata_link ./0000:00:1f.2/ata1.4/ata_port ./0000:00:1f.2/ata1.4/ata_port/ata1.4 ./0000:00:1f.2/ata1.5 ./0000:00:1f.2/ata1.5/link5/dev5.0/ata_device ./0000:00:1f.2/ata1.5/link5/ata_link ./0000:00:1f.2/ata1.5/ata_port ./0000:00:1f.2/ata1.5/ata_port/ata1.5 ./0000:00:1f.2/ata1.6 ./0000:00:1f.2/ata1.6/link6/dev6.0/ata_device ./0000:00:1f.2/ata1.6/link6/ata_link ./0000:00:1f.2/ata1.6/ata_port ./0000:00:1f.2/ata1.6/ata_port/ata1.6 Signed-off-by: David Milburn Signed-off-by: Jeff Garzik

[libata] replace sata_settings with devslp_timing

2013-01-14T18:29:15Z

NCQ capability was used to check availability of SATA Settings page from Identify Device Data Log, which contains DevSlp timing variables. It does not work on some HDDs and leads to error messages. IDENTIFY word 78 bit 5(Hardware Feature Control) can't work either because it is only the sufficient condition of Identify Device data log, not the necessary condition. This patch replaced ata_device->sata_settings with ->devslp_timing to only save DevSlp timing variables(8 bytes), instead of the whole SATA Settings page(512 bytes). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=51881 Reported-by: Borislav Petkov Signed-off-by: Shane Huang Cc: stable@vger.kernel.org Signed-off-by: Jeff Garzik

libata: implement ata_platform_remove_one()

2012-12-03T10:15:17Z

This relatively simple boiler-plate code is repeated in several platform drivers. We should implement a common version in libata. Signed-off-by: Brian Norris Signed-off-by: Jeff Garzik

libata: restore acpi disable functionality

2012-12-03T09:57:15Z

Commit 66fa7f215 "libata-acpi: improve ACPI disabling" introdcued the behaviour of disabling ATA ACPI if ata_acpi_on_devcfg failed the 2nd time, but commit 30dcf76ac dropped this behaviour and this caused problem for Dimitris Damigos, where his laptop can not resume correctly. The bugzilla page for it is: https://bugzilla.kernel.org/show_bug.cgi?id=49331 The problem is, ata_dev_push_id will fail the 2nd time it is invoked, and due to disabling ACPI code is dropped, ata_acpi_on_devcfg which calls ata_dev_push_id will keep failing and eventually made the device disabled. This patch restores the original behaviour, if acpi failed the 2nd time, disable acpi functionality for the device(and we do not event need to add a debug message for this as it is still there ;-). Reported-by: Dimitris Damigos Signed-off-by: Aaron Lu Cc: Signed-off-by: Jeff Garzik

Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2012-10-03T02:01:32Z

Pull first round of SCSI updates from James Bottomley: "This is a large set of updates, mostly for drivers (qla2xxx [including support for new 83xx based card], qla4xxx, mpt2sas, bfa, zfcp, hpsa, be2iscsi, isci, lpfc, ipr, ibmvfc, ibmvscsi, megaraid_sas). There's also a rework for tape adding virtually unlimited numbers of tape drives plus a set of dif fixes for sd and a fix for a live lock on hot remove of SCSI devices. This round includes a signed tag pull of isci-for-3.6 Signed-off-by: James Bottomley " Fix up trivial conflict in drivers/scsi/qla2xxx/qla_nx.c due to new PCI helper function use in a function that was removed by this pull. * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (198 commits) [SCSI] st: remove st_mutex [SCSI] sd: Ensure we correctly disable devices with unknown protection type [SCSI] hpsa: gen8plus Smart Array IDs [SCSI] qla4xxx: Update driver version to 5.03.00-k1 [SCSI] qla4xxx: Disable generating pause frames for ISP83XX [SCSI] qla4xxx: Fix double clearing of risc_intr for ISP83XX [SCSI] qla4xxx: IDC implementation for Loopback [SCSI] qla4xxx: update copyrights in LICENSE.qla4xxx [SCSI] qla4xxx: Fix panic while rmmod [SCSI] qla4xxx: Fail probe_adapter if IRQ allocation fails [SCSI] qla4xxx: Prevent MSI/MSI-X falling back to INTx for ISP82XX [SCSI] qla4xxx: Update idc reg in case of PCI AER [SCSI] qla4xxx: Fix double IDC locking in qla4_8xxx_error_recovery [SCSI] qla4xxx: Clear interrupt while unloading driver for ISP83XX [SCSI] qla4xxx: Print correct IDC version [SCSI] qla4xxx: Added new mbox cmd to pass driver version to FW [SCSI] scsi_dh_alua: Enable STPG for unavailable ports [SCSI] scsi_remove_target: fix softlockup regression on hot remove [SCSI] ibmvscsi: Fix host config length field overflow [SCSI] ibmvscsi: Remove backend abstraction ...

ahci: implement aggressive SATA device sleep support

2012-09-13T05:08:53Z

Device Sleep is a feature as described in AHCI 1.3.1 Technical Proposal. This feature enables an HBA and SATA storage device to enter the DevSleep interface state, enabling lower power SATA-based systems. Aggressive Device Sleep enables the HBA to assert the DEVSLP signal as soon as there are no commands outstanding to the device and the port specific Device Sleep idle timer has expired. This enables autonomous entry into the DevSleep interface state without waiting for software in power sensitive systems. This patch enables Aggressive Device Sleep only if both host controller and device support it. Tested on AMD reference board together with Device Sleep supported device sample. Signed-off-by: Shane Huang Reviewed-by: Aaron Lu Signed-off-by: Jeff Garzik

[SCSI] libsas, ipr: cleanup ata_host flags initialization via ata_host_init

2012-08-24T09:10:24Z

libsas and ipr pass flags to ata_host_init that are meant for the port. ata_host flags: ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */ ATA_HOST_STARTED = (1 << 1), /* Host started */ ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */ flags passed by libsas: ATA_FLAG_SATA = (1 << 1), ATA_FLAG_PIO_DMA = (1 << 7), /* PIO cmds via DMA */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ The only one that aliases is ATA_HOST_STARTED which is a 'don't care' in the libsas and ipr cases since ata_hosts from these sources are not registered with libata. Reported-by: Hannes Reinecke Signed-off-by: Dan Williams Acked-by: Brian King Acked-by: Jeff Garzik Signed-off-by: James Bottomley