user/sven/linux.git/include/linux/libata.h, branch v4.14.181

ata: ahci: Add shutdown to freeze hardware resources of ahci

2020-02-28T15:36:16Z

commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS

2018-07-17T09:39:25Z

commit 240630e61870e62e39a97225048f9945848fa5f5 upstream. There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: Cleanup ata_read_log_page()

2017-07-10T17:41:04Z

The warning message "READ LOG DMA EXT failed, trying unqueued" in ata_read_log_page() as well as the macro name ATA_HORKAGE_NO_NCQ_LOG are confusing: the command READ LOG DMA EXT is not an queued NCQ command unless it is encapsulated in a RECEIVE FPDMA QUEUED command. From ACS-4 READ LOG DMA EXT description: "The device processes the READ LOG DMA EXT command in the NCQ feature set environment (see 4.13.6) if the READ LOG DMA EXT command is encapsulated in a RECEIVE FPDMA QUEUED command (see 7.30) with the inputs encapsulated as shown in 7.23.6." To avoid confusion, fix the warning messsage to mention switching to PIO and not "unqueued" and rename the macro ATA_HORKAGE_NO_NCQ_LOG to ATA_HORKAGE_NO_DMA_LOG. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Tejun Heo

libata: implement SECURITY PROTOCOL IN/OUT

2017-06-05T19:29:22Z

This allows us to use the generic OPAL code with ATA devices. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo

ata: update references for libata documentation

2017-05-16T15:25:59Z

The libata documentation is now using ReST. Update references to it to point to the new place. Signed-off-by: Mauro Carvalho Chehab Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo

Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-02-22T01:21:32Z

Pull libata updates from Tejun Heo: - Bartlomiej added pata_falcon - Christoph is trying to remove use of static 4k buf. It's still WIP - config cleanup around HAS_DMA - other fixes and driver-specific changes * 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (29 commits) ata: pata_of_platform: using of_property_read_u32() helper pata_atiixp: Don't use unconnected secondary port on SB600/SB700 libata-sff: Don't scan disabled ports when checking for legacy mode. pata_octeon_cf: remove unused local variables from octeon_cf_set_piomode() ahci: qoriq: added ls2088a platforms support ahci: qoriq: report error when ecc register address is missing in dts ahci: qoriq: added a condition to enable dma coherence Revert "libata: switch to dynamic allocation instead of ata_scsi_rbuf" ahci: imx: fix building without hwmon or thermal ata: add Atari Falcon PATA controller driver ata: pass queued command to ->sff_data_xfer method ata: allow subsystem to be used on m68k arch libata: switch to dynamic allocation instead of ata_scsi_rbuf libata: don't call ata_scsi_rbuf_fill for command without a response buffer libata: call ->scsi_done from ata_scsi_simulate libata: remove the done callback from ata_scsi_args libata: move struct ata_scsi_args to libata-scsi.c libata: avoid global response buffer in atapi_qc_complete libata-eh: Use switch() instead of sparse array for protocol strings ata: sata_mv: Convert to devm_ioremap_resource() ...

scsi: remove eh_timed_out methods in the transport template

2017-02-07T00:10:03Z

Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Tyrel Datwyler Signed-off-by: Martin K. Petersen

ata: pass queued command to ->sff_data_xfer method

2017-01-10T16:11:17Z

For Atari Falcon PATA support we need to check the current command in its ->sff_data_xfer method. Update core code and all users accordingly. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Tejun Heo

ata: ATA Command Priority Disabled By Default

2016-10-19T18:34:36Z

Add a sysfs entry to turn on priority information being passed to a ATA device. By default this feature is turned off. This patch depends on ata: Enabling ATA Command Priorities tj: Renamed ncq_prio_on to ncq_prio_enable and removed trivial ata_ncq_prio_on() and open-coded the test. Signed-off-by: Adam Manzanares Signed-off-by: Tejun Heo

ata: Enabling ATA Command Priorities

2016-10-19T18:34:36Z

This patch checks to see if an ATA device supports NCQ command priorities. If so and the user has specified an iocontext that indicates IO_PRIO_CLASS_RT then we build a tf with a high priority command. This is done to improve the tail latency of commands that are high priority by passing priority to the device. tj: Removed trivial ata_ncq_prio_enabled() and open-coded the test. Signed-off-by: Adam Manzanares Signed-off-by: Tejun Heo