user/sven/linux.git/include/linux/libata.h, branch v4.14.262

libata: fix read log timeout value

2021-11-26T10:40:20Z

commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream. Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

2021-10-09T12:09:46Z

commit 7a8526a5cd51cf5f070310c6c37dd7293334ac49 upstream. Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe Cc: Krzysztof Olędzki Signed-off-by: Greg Kroah-Hartman

ata: make qc_prep return ata_completion_errors

2020-10-01T11:12:52Z

commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ata: define AC_ERR_OK

2020-10-01T11:12:52Z

commit 25937580a5065d6fbd92d9c8ebd47145ad80052e upstream. Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by: Jiri Slaby Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

2020-09-09T17:03:12Z

commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

libata: Use per port sync for detach

2020-06-25T13:41:59Z

[ Upstream commit b5292111de9bb70cba3489075970889765302136 ] Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry Signed-off-by: Kai-Heng Feng Tested-by: John Garry BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci: Add shutdown to freeze hardware resources of ahci

2020-02-28T15:36:16Z

commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ahci: Disable LPM on Lenovo 50 series laptops with a too old BIOS

2018-07-17T09:39:25Z

commit 240630e61870e62e39a97225048f9945848fa5f5 upstream. There have been several reports of LPM related hard freezes about once a day on multiple Lenovo 50 series models. Strange enough these reports where not disk model specific as LPM issues usually are and some users with the exact same disk + laptop where seeing them while other users where not seeing these issues. It turns out that enabling LPM triggers a firmware bug somewhere, which has been fixed in later BIOS versions. This commit adds a new ahci_broken_lpm() function and a new ATA_FLAG_NO_LPM for dealing with this. The ahci_broken_lpm() function contains DMI match info for the 4 models which are known to be affected by this and the DMI BIOS date field for known good BIOS versions. If the BIOS date is older then the one in the table LPM will be disabled and a warning will be printed. Note the BIOS dates are for known good versions, some older versions may work too, but we don't know for sure, the table is using dates from BIOS versions for which users have confirmed that upgrading to that version makes the problem go away. Unfortunately I've been unable to get hold of the reporter who reported that BIOS version 2.35 fixed the problems on the W541 for him. I've been able to verify the DMI_SYS_VENDOR and DMI_PRODUCT_VERSION from an older dmidecode, but I don't know the exact BIOS date as reported in the DMI. Lenovo keeps a changelog with dates in their release notes, but the dates there are the release dates not the build dates which are in DMI. So I've chosen to set the date to which we compare to one day past the release date of the 2.34 BIOS. I plan to fix this with a follow up commit once I've the necessary info. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: Cleanup ata_read_log_page()

2017-07-10T17:41:04Z

The warning message "READ LOG DMA EXT failed, trying unqueued" in ata_read_log_page() as well as the macro name ATA_HORKAGE_NO_NCQ_LOG are confusing: the command READ LOG DMA EXT is not an queued NCQ command unless it is encapsulated in a RECEIVE FPDMA QUEUED command. From ACS-4 READ LOG DMA EXT description: "The device processes the READ LOG DMA EXT command in the NCQ feature set environment (see 4.13.6) if the READ LOG DMA EXT command is encapsulated in a RECEIVE FPDMA QUEUED command (see 7.30) with the inputs encapsulated as shown in 7.23.6." To avoid confusion, fix the warning messsage to mention switching to PIO and not "unqueued" and rename the macro ATA_HORKAGE_NO_NCQ_LOG to ATA_HORKAGE_NO_DMA_LOG. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Tejun Heo

libata: implement SECURITY PROTOCOL IN/OUT

2017-06-05T19:29:22Z

This allows us to use the generic OPAL code with ATA devices. Signed-off-by: Christoph Hellwig Signed-off-by: Tejun Heo