user/sven/linux.git/include/linux/libata.h, branch v5.15.44

libata: fix read log timeout value

2021-11-18T18:15:51Z

commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream. Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

2021-09-03T14:06:02Z

Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe

include:libata: fix boolreturn.cocci warnings

2021-08-24T16:11:21Z

./include/linux/libata.h:1462:8-9:WARNING: return of 0/1 in function 'ata_is_host_link' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot Signed-off-by: Jing Yangyang Link: https://lore.kernel.org/r/20210824060702.59006-1-deng.changcheng@zte.com.cn Signed-off-by: Jens Axboe

libata: Introduce ncq_prio_supported sysfs sttribute

2021-08-18T13:19:39Z

Currently, the only way a user can determine if a SATA device supports NCQ priority is to try to enable the use of this feature using the ncq_prio_enable sysfs device attribute. If enabling the feature fails, it is because the device does not support NCQ priority. Otherwise, the feature is enabled and success indicates that the device supports NCQ priority. Improve this odd interface by introducing the read-only ncq_prio_supported sysfs device attribute to indicate if a SATA device supports NCQ priority. The value of this attribute reflects the status of device flag ATA_DFLAG_NCQ_PRIO, which is set only for devices supporting NCQ priority. Add this new sysfs attribute to the device attributes group of libahci and libata-sata. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20210816014456.2191776-10-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

libata: print feature list on device scan

2021-08-18T13:19:39Z

Print a list of features supported by a drive when it is configured in ata_dev_configure() using the new function ata_dev_print_features(). The features printed are not already advertized and are: trusted send-recev support, device attention support, device sleep support, NCQ send-recv support and NCQ priority support. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20210816014456.2191776-9-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

ata: include: libata: Move fields commonly over-written to separate MACRO

2021-06-16T12:50:25Z

This is a pre-cursor to some upcoming W=1 fix-ups. Fixes the following W=1 kernel build warning(s): Cc: Jens Axboe Cc: Mark Lord Cc: Philipp Zabel Cc: Tejun Heo Cc: linux-ide@vger.kernel.org Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210528090502.1799866-2-lee.jones@linaro.org Signed-off-by: Jens Axboe

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

2020-09-02T17:31:23Z

All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-06-27T22:20:03Z

Pull SCSI fixes from James Bottomley: "Six small fixes, five in drivers and one to correct another minor regression from cc97923a5bcc ("block: move dma drain handling to scsi") where we still need the drain stub to be built in to the kernel for the modular libata, non-modular SAS driver case" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptscsih: Fix read sense data size scsi: zfcp: Fix panic on ERP timeout for previously dismissed ERP action scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset() scsi: libata: Fix the ata_scsi_dma_need_drain stub scsi: qla2xxx: Keep initiator ports after RSCN scsi: qla2xxx: Set NVMe status code for failed NVMe FCP request

scsi: libata: Fix the ata_scsi_dma_need_drain stub

2020-06-24T03:52:18Z

We not only need the stub when libata is disabled, but also if it is modular and there are built-in SAS drivers (which can happen when SCSI_SAS_ATA is disabled). Link: https://lore.kernel.org/r/20200620071302.462974-2-hch@lst.de Fixes: b8f1d1e05817 ("scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers") Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2020-06-21T02:23:13Z

Pull SCSI fixes from James Bottomley: "One minor fix and two patches reworking the ata dma drain for the !CONFIG_LIBATA case. The latter is a 5.7 regression fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA scsi: ufs-bsg: Fix runtime PM imbalance on error