user/sven/linux.git/include/linux/libata.h, branch v5.16.4

libata: add horkage for missing Identify Device log

2021-11-11T23:05:17Z

ACS-3 introduced the ATA Identify Device Data log as mandatory. A warning message currently signals to the user if a device does not report supporting this log page in the log directory page, regardless of the ATA version of the device. Furthermore, this warning will appear for all attempts at accessing this missing log page during device revalidation. Since it is useless to constantly access the log directory and warn about this lack of support once we have discovered that the device does not support this log page, introduce the horkage flag ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for the Identify Device Data log page. Set this flag when ata_log_supported() returns false in ata_identify_page_supported(). The warning is printed only if the device ATA level is 10 or above (ACS-3 or above), and only once on device scan. With this flag set, the log directory page is not accessed again to test for Identify Device Data log page support. Signed-off-by: Damien Le Moal Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen

libata: fix read log timeout value

2021-11-11T01:55:32Z

Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2021-11-05T15:42:02Z

Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...

libata: support concurrent positioning ranges log

2021-10-27T03:01:48Z

Add support to discover if an ATA device supports the Concurrent Positioning Ranges data log (address 0x47), indicating that the device is capable of seeking to multiple different locations in parallel using multiple actuators serving different LBA ranges. Also add support to translate the concurrent positioning ranges log into its equivalent Concurrent Positioning Ranges VPD page B9h in libata-scsi.c. The format of the Concurrent Positioning Ranges Log is defined in ACS-5 r9. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Reviewed-by: Martin K. Petersen Reviewed-by: Keith Busch Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

scsi: ata: Switch to attribute groups

2021-10-17T01:45:52Z

struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-3-bvanassche@acm.org Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

2021-09-03T14:06:02Z

Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe

include:libata: fix boolreturn.cocci warnings

2021-08-24T16:11:21Z

./include/linux/libata.h:1462:8-9:WARNING: return of 0/1 in function 'ata_is_host_link' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot Signed-off-by: Jing Yangyang Link: https://lore.kernel.org/r/20210824060702.59006-1-deng.changcheng@zte.com.cn Signed-off-by: Jens Axboe

libata: Introduce ncq_prio_supported sysfs sttribute

2021-08-18T13:19:39Z

Currently, the only way a user can determine if a SATA device supports NCQ priority is to try to enable the use of this feature using the ncq_prio_enable sysfs device attribute. If enabling the feature fails, it is because the device does not support NCQ priority. Otherwise, the feature is enabled and success indicates that the device supports NCQ priority. Improve this odd interface by introducing the read-only ncq_prio_supported sysfs device attribute to indicate if a SATA device supports NCQ priority. The value of this attribute reflects the status of device flag ATA_DFLAG_NCQ_PRIO, which is set only for devices supporting NCQ priority. Add this new sysfs attribute to the device attributes group of libahci and libata-sata. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20210816014456.2191776-10-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

libata: print feature list on device scan

2021-08-18T13:19:39Z

Print a list of features supported by a drive when it is configured in ata_dev_configure() using the new function ata_dev_print_features(). The features printed are not already advertized and are: trusted send-recev support, device attention support, device sleep support, NCQ send-recv support and NCQ priority support. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20210816014456.2191776-9-damien.lemoal@wdc.com Signed-off-by: Jens Axboe

ata: include: libata: Move fields commonly over-written to separate MACRO

2021-06-16T12:50:25Z

This is a pre-cursor to some upcoming W=1 fix-ups. Fixes the following W=1 kernel build warning(s): Cc: Jens Axboe Cc: Mark Lord Cc: Philipp Zabel Cc: Tejun Heo Cc: linux-ide@vger.kernel.org Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20210528090502.1799866-2-lee.jones@linaro.org Signed-off-by: Jens Axboe