user/sven/linux.git/include/linux/libata.h, branch v6.1.16

Merge tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2022-10-07T17:48:49Z

Pull ata updates from Damien Le Moal: - Print the timeout value for internal command failures due to a timeout (from Tomas) - Improve parameter names in ata_dev_set_feature() to clarify this function use (from Niklas) - Improve the ahci driver low power mode setting initialization to allow more flexibility for the user (from Rafael) - Several patches to remove redundant variables in libata-core, libata-eh and the pata_macio driver and to fix typos in comments (from Jinpeng, Shaomin, Ye) - Some code simplifications and macro renaming (for clarity) in various functions of libata-core (from me) - Add a missing check for a potential failure of sata_scr_read() in sata_print_link_status() (from Li) - Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options (from Lukas) - Cleanups of ata dt-bindings and improvements of libahci_platform, ahci and libahci code (from Serge) - New driver for Synopsys AHCI SATA controllers, based of the generic ahci code (from Serge). One compilation warning fix is added for this driver (from me) - Several fixes to macros used to discover a drive capabilities to be consistent with the ACS specifications (from Niklas) - A couple of simplifcations to some libata functions, removing unnecessary arguments (from Niklas) - An improvements to libata-eh code to avoid unnecessary link reset when revalidating a drive after a failed command. In practice, this extra, unneeded reset, reset does not cause any arm beyond slightly slowing down error recovery (from Niklas) * tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits) ata: libata-eh: avoid needless hard reset when revalidating link ata: libata: drop superfluous ata_eh_analyze_tf() parameter ata: libata: drop superfluous ata_eh_request_sense() parameter ata: fix ata_id_has_dipm() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_devslp() ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: libata-eh: Remove the unneeded result variable ata: ahci_st: Enable compile test ata: ahci_st: Fix compilation warning MAINTAINERS: Add maintainers for DWC AHCI SATA driver ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support ata: ahci-dwc: Add platform-specific quirks support dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema ata: ahci: Add DWC AHCI SATA controller support ata: libahci_platform: Add function returning a clock-handle by id dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema ata: ahci: Introduce firmware-specific caps initialization ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments ata: libahci: Don't read AHCI version twice in the save-config method ...

ata: libata-sata: Fix device queue depth control

2022-09-28T11:47:31Z

The function __ata_change_queue_depth() uses the helper ata_scsi_find_dev() to get the ata_device structure of a scsi device and set that device maximum queue depth. However, when the ata device is managed by libsas, ata_scsi_find_dev() returns NULL, turning __ata_change_queue_depth() into a nop, which prevents the user from setting the maximum queue depth of ATA devices used with libsas based HBAs. Fix this by renaming __ata_change_queue_depth() to ata_change_queue_depth() and adding a pointer to the ata_device structure of the target device as argument. This pointer is provided by ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of a libata managed device and by sas_change_queue_depth() using sas_to_ata_dev() in the case of a libsas managed ata device. Signed-off-by: Damien Le Moal Tested-by: John Garry

ata: libata: Rename ATA_DFLAG_NCQ_PRIO_ENABLE

2022-08-25T22:46:08Z

Rename ATA_DFLAG_NCQ_PRIO_ENABLE to ATA_DFLAG_NCQ_PRIO_ENABLED to match the fact that this flags indicates if NCQ priority use is enabled by the user. Signed-off-by: Damien Le Moal

ata: libata: Set __ATA_BASE_SHT max_sectors

2022-08-20T16:29:50Z

Commit 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") inadvertently capped the max_sectors value for some SATA disks to a value which is lower than we would want. For a device which supports LBA48, we would previously have request queue max_sectors_kb and max_hw_sectors_kb values of 1280 and 32767 respectively. For AHCI controllers, the value chosen for shost max sectors comes from the minimum of the SCSI host default max sectors in SCSI_DEFAULT_MAX_SECTORS (1024) and the shost DMA device mapping limit. This means that we would now set the max_sectors_kb and max_hw_sectors_kb values for a disk which supports LBA48 at 512, ignoring DMA mapping limit. As report by Oliver at [0], this caused a performance regression. Fix by picking a large enough max sectors value for ATA host controllers such that we don't needlessly reduce max_sectors_kb for LBA48 disks. [0] https://lore.kernel.org/linux-ide/YvsGbidf3na5FpGb@xsang-OptiPlex-9020/T/#m22d9fc5ad15af66066dd9fecf3d50f1b1ef11da3 Fixes: 0568e6122574 ("ata: libata-scsi: cap ata_device->max_sectors according to shost->max_sectors") Reported-by: Oliver Sang Signed-off-by: John Garry Signed-off-by: Damien Le Moal

ata: make ata_port::fastdrain_cnt unsigned int

2022-06-19T23:17:33Z

*unsigned long* ata_port::fastdrain_cnt (64-bit value in a 64-bit kernel) is always assigned from the 32-bit *unsigned int* variables, thus could also be made just *unsigned int*... Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: make transfer mode masks unsigned int

2022-06-17T07:35:02Z

The packed transfer mode masks and also the {pio|mwdma|udma}_mask fields of *struct*s ata_device and ata_port_info are declared as *unsigned long* (which is a 64-bit type on 64-bit architectures) but actually the packed masks occupy only 20 bits (7 PIO modes, 5 MWDMA modes, and 8 UDMA modes) and the PIO/MWDMA/UDMA masks easily fit into just 8 bits each, so we can safely use (always 32-bit) *unsigned int* variables instead. This saves 745 bytes of object code in libata-core.o alone, not to mention LLDDs... Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata: drop 'sas_last_tag'

2022-06-06T00:52:17Z

Unused now. Fixes: 4f1a22ee7b57 ("libata: Improve ATA queued command allocation") Cc: John Garry Signed-off-by: Hannes Reinecke Reviewed-by: John Garry Signed-off-by: Damien Le Moal

ata: libata-core: fix parameter type in ata_xfer_mode2shift()

2022-04-12T00:35:04Z

The data transfer mode that corresponds to the 'xfer_mode' parameter for ata_xfer_mode2shift() is a 8-bit *unsigned* value. Using *unsigned long* to declare the parameter leads to a problematic implicit *int* to *unsigned long* cast and was most probably a result of a copy/paste mistake -- use the 'u8' type instead, as in ata_xfer_mode2mask()... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

libata: Improve ATA queued command allocation

2022-04-11T00:27:44Z

Improve ATA queued command allocation as follows: - For attaining a qc tag for a SAS host we need to allocate a bit in ata_port.sas_tag_allocated bitmap. However we already have a unique tag per device in range [0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that instead. - It is a bit pointless to have ata_qc_new_init() in libata-core.c since it pokes scsi internals, so inline it in ata_scsi_qc_new() (in libata-scsi.c). Also update Doc accordingly. - Use standard SCSI helpers set_host_byte() and set_status_byte() in ata_scsi_qc_new(). Christoph Hellwig originally contributed the change to inline ata_qc_new_init(). Signed-off-by: John Garry Reviewed-by: Christoph Hellwig Signed-off-by: Damien Le Moal

Merge tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2022-03-23T21:35:59Z

Pull ata updates from Damien Le Moal: "For this cycle, no big change but many small fixes and code cleanup to libata, the ahci driver and various pata drivers. In more details: - Code simplification in pata_platform using platform_get_mem_or_io(), from Lad. - Fix read-only arrays declarations as const in pata_atiixp and pata_pdc202xx_old, from Colin. - Various cleanups and code simplification in libata-scsi, from me. - Remove dead code in libata-acpi, from Sergey. - Skip device scan deboune delay for Marvell 88SE9235 adapters (ahci) to speedup boot, from Paul. - Simplify functions declaration and use for functions always returning 0 in libata-core, from Sergey. - Non-fatal error fixes and in the pata_hpt366 and pata_hpt3x2n drivers, from Sergey. - Various code cleanup in the pata_artop, pata_hpt37x, pata_hpt366, pata_hpt3x2n, pata_samsung_cf and sata_rcar drivers, from Sergey. - Some libata-sff and libata-scsi code cleanup (e.g. change functions to return "bool"), from Sergey. - Renae ahci_board_mobile to board_ahci_low_power to be more descriptive of the feature as that is also used on PC and server AHCI adapters, from Mario. - Cleanup of OF match tables, from Geert. - Simplify the pata_pxa driver initialization using platform_get_irq(), from Minghao" * tag 'ata-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (38 commits) ata: pata_pxa: Use platform_get_irq() to get the interrupt ata: Drop commas after OF match table sentinels ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item ata: ahci: Rename `AHCI_HFLAG_IS_MOBILE` ata: ahci: Rename board_ahci_mobile ata: pata_hpt37x: merge transfer mode setting methods ata: libata-sff: use *switch* statement in ata_sff_dev_classify() ata: add/use ata_taskfile::{error|status} fields ata: Kconfig: fix sata gemini compile test condition ata: libata-scsi: use *switch* statements to check SCSI command codes ata: libata-sff: refactor ata_sff_altstatus() ata: libata-sff: refactor ata_sff_set_devctl() ata: libata-sff: make ata_resources_present() return 'bool' ata: pata_hpt3x2n: disable fast interrupts in prereset() method ata: pata_hpt37x: disable fast interrupts in prereset() method ata: pata_hpt366: disable fast interrupts in prereset() method ata: pata_mpc52xx: use GFP_KERNEL ata: sata_rcar: drop unused #define's ata: pata_hpt366: check channel enable bits ata: sata_rcar: make sata_rcar_ata_devchk() return 'bool' ...