user/sven/linux.git/include/linux/libata.h, branch v6.10.7

ata,scsi: libata-core: Do not leak memory for ata_port struct members

2024-06-30T20:23:21Z

libsas is currently not freeing all the struct ata_port struct members, e.g. ncq_sense_buf for a driver supporting Command Duration Limits (CDL). Add a function, ata_port_free(), that is used to free a ata_port, including its struct members. It makes sense to keep the code related to freeing a ata_port in its own function, which will also free all the struct members of struct ata_port. Fixes: 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL commands using policy 0xD") Reviewed-by: John Garry Link: https://lore.kernel.org/r/20240629124210.181537-8-cassel@kernel.org Signed-off-by: Niklas Cassel

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-05-15T01:25:53Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas). The major update (which causes a conflict with block, see below) is Christoph removing the queue limits and their associated block helpers. The remaining patches are assorted minor fixes and deprecated function updates plus a bit of constification" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) scsi: mpi3mr: Sanitise num_phys scsi: lpfc: Copyright updates for 14.4.0.2 patches scsi: lpfc: Update lpfc version to 14.4.0.2 scsi: lpfc: Add support for 32 byte CDBs scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading scsi: lpfc: Update logging of protection type for T10 DIF I/O scsi: lpfc: Change default logging level for unsolicited CT MIB commands scsi: target: Remove unused list 'device_list' scsi: iscsi: Remove unused list 'connlist_err' scsi: ufs: exynos: Add support for Tensor gs101 SoC scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata scsi: ufs: exynos: Allow max frequencies up to 267Mhz scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option scsi: ufs: dt-bindings: exynos: Add gs101 compatible scsi: qla2xxx: Fix debugfs output for fw_resource_count scsi: qedf: Ensure the copied buf is NUL terminated scsi: bfa: Ensure the copied buf is NUL terminated ...

scsi: libata: Switch to using ->device_configure

2024-04-12T01:37:50Z

Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240409143748.980206-21-hch@lst.de Reviewed-by: John Garry Reviewed-by: Hannes Reinecke Acked-by: Damien Le Moal Signed-off-by: Martin K. Petersen

scsi: ata: libata-sata: Factor out NCQ Priority configuration helpers

2024-03-25T20:00:06Z

Export libata NCQ Priority configuration helpers to be reused for libsas managed SATA devices. Switched locking from spin_lock_irq() to spin_lock_irqsave(). In the future someone might call these helper functions when interrupts are disabled. spin_unlock_irq() could lead to a premature re-enabling of interrupts, whereas spin_unlock_irqrestore() restores the interrupt state to its condition prior to the spin_lock_irqsave() call. Acked-by: Damien Le Moal Reviewed-by: Jason Yan Reviewed-by: Hannes Reinecke Signed-off-by: Igor Pylypiv Link: https://lore.kernel.org/r/20240307214418.3812290-2-ipylypiv@google.com Reviewed-by: Niklas Cassel Signed-off-by: Martin K. Petersen

scsi: sd: Fix TCG OPAL unlock on system resume

2024-03-25T19:46:12Z

Commit 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") introduced the manage_system_start_stop scsi_device flag to allow libata to indicate to the SCSI disk driver that nothing should be done when resuming a disk on system resume. This change turned the execution of sd_resume() into a no-op for ATA devices on system resume. While this solved deadlock issues during device resume, this change also wrongly removed the execution of opal_unlock_from_suspend(). As a result, devices with TCG OPAL locking enabled remain locked and inaccessible after a system resume from sleep. To fix this issue, introduce the SCSI driver resume method and implement it with the sd_resume() function calling opal_unlock_from_suspend(). The former sd_resume() function is renamed to sd_resume_common() and modified to call the new sd_resume() function. For non-ATA devices, this result in no functional changes. In order for libata to explicitly execute sd_resume() when a device is resumed during system restart, the function scsi_resume_device() is introduced. libata calls this function from the revalidation work executed on devie resume, a state that is indicated with the new device flag ATA_DFLAG_RESUMING. Doing so, locked TCG OPAL enabled devices are unlocked on resume, allowing normal operation. Fixes: 3cc2ffe5c16d ("scsi: sd: Differentiate system and runtime start/stop management") Link: https://bugzilla.kernel.org/show_bug.cgi?id=218538 Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20240319071209.1179257-1-dlemoal@kernel.org Signed-off-by: Martin K. Petersen

ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN

2024-01-22T21:26:03Z

Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays as "max_performance" in sysfs. This is quite misleading as they are not the same. For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all, leaving the configuration in unknown state. For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the policy to ATA_LPM_MAX_POWER. This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig: 0 => Keep firmware settings 1 => Maximum performance Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality. While at it, update libata.h to mention that the ascii descriptions are in libata-sata.c and not in libata-scsi.c. Reviewed-by: Damien Le Moal Signed-off-by: Niklas Cassel

ata: libata: Cleanup inline DMA helper functions

2023-10-03T00:39:50Z

Simplify the inline DMA helper functions ata_using_mwdma(), ata_using_udma() and ata_dma_enabled() to directly return as a boolean the result of their test condition. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen

ata: libata: Annotate struct ata_cpr_log with __counted_by

2023-10-03T00:39:49Z

Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct ata_cpr_log. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Damien Le Moal Cc: linux-ide@vger.kernel.org Signed-off-by: Kees Cook Reviewed-by: Gustavo A. R. Silva Signed-off-by: Damien Le Moal

ata: ahci: print the lpm policy on boot

2023-10-03T00:39:49Z

The target LPM policy can be set using either a Kconfig or a kernel module parameter. However, if the board type is set to anything but board_ahci_low_power, then the LPM policy will overridden and set to ATA_LPM_UNKNOWN. Additionally, if the default suspend is suspend to idle, depending on the hardware capabilities of the HBA, ahci_update_initial_lpm_policy() might override the LPM policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER. All this means that it is very hard to know which LPM policy a user will actually be using on a given system. In order to make it easier to debug LPM related issues, print the LPM policy on boot. One common LPM related issue is that the device fails to link up. Because of that, we cannot add this print to ata_dev_configure(), as that function is only called after a successful link up. Instead, add the info using ata_port_desc(), with the help of a new ata_port_desc_misc() helper. The port description is printed once per port during boot. Before changes: ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 After changes: ata1: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780100 irq 170 lpm-pol 4 ata2: SATA max UDMA/133 abar m524288@0xa5780000 port 0xa5780180 irq 170 lpm-pol 4 Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal

ata: libata-scsi: Disable scsi device manage_system_start_stop

2023-09-28T12:23:03Z

The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen