user/sven/linux.git/include/linux/libata.h, branch v6.14.8

Merge tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux

2025-03-19T14:31:43Z

Pull ata fix from Niklas Cassel: - Fix a regression on ATI AHCI controllers, where certain Samsung drives fails to be detected on a warm boot when LPM is enabled. LPM on ATI AHCI works fine with other drives. Likewise, the Samsung drives works fine with LPM with other AHI controllers. Thus, just like the weirdo ATA_QUIRK_NO_NCQ_ON_ATI quirk, add a new ATA_QUIRK_NO_LPM_ON_ATI quirk to disable LPM only on ATI AHCI controllers. * tag 'ata-6.14-final' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs

ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs

2025-03-18T09:11:28Z

Before commit 7627a0edef54 ("ata: ahci: Drop low power policy board type") the ATI AHCI controllers specified board type 'board_ahci' rather than board type 'board_ahci'. This means that LPM was historically not enabled for the ATI AHCI controllers. By looking at commit 7a8526a5cd51 ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason, that Samsung SSDs do not play nice with ATI AHCI controllers. (When using other AHCI controllers, NCQ can be enabled on these Samsung SSDs without issues.) In a similar way, from user reports, it is clear the ATI AHCI controllers can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected by the ATI AHCI controller even after a COMRESET.) Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g. Intel AHCI controllers, these Samsung drives appear to work perfectly fine. Considering that the combination of ATI + Samsung, for some unknown reason, does not seem to work well, disable LPM when detecting an ATI AHCI controller with a problematic Samsung SSD. Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI). Fixes: 7627a0edef54 ("ata: ahci: Drop low power policy board type") Suggested-by: Hans de Goede Reported-by: Eric Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/ Tested-by: Eric Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org Signed-off-by: Niklas Cassel

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2025-01-27T00:12:44Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr). The major core change is the renaming of the slave_ methods plus a bit of constification. The rest are minor updates and fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits) scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init() scsi: fnic: Test for memory allocation failure and return error code scsi: fnic: Return appropriate error code from failure of scsi drv init scsi: fnic: Return appropriate error code for mem alloc failure scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro scsi: fnic: Fix use of uninitialized value in debug message scsi: fnic: Delete incorrect debugfs error handling scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP scsi: fnic: Remove extern definition from .c files scsi: fnic: Remove unnecessary else and unnecessary break in FDLS scsi: mpi3mr: Fix possible crash when setting up bsg fails scsi: ufs: bsg: Set bsg_queue to NULL after removal scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails scsi: st: Don't set pos_unknown just after device recognition scsi: aic7xxx: Fix build 'aicasm' warning scsi: Revert "scsi: ufs: core: Probe for EXT_IID support" scsi: storvsc: Ratelimit warning logs to prevent VM denial of service scsi: scsi_debug: Constify sdebug_driver_template scsi: documentation: Corrections for struct updates scsi: driver-api: documentation: Change what is added to docbook ...

block: simplify tag allocation policy selection

2025-01-06T14:37:41Z

Use a plain BLK_MQ_F_* flag to select the round robin tag selection instead of overlaying an enum with just two possible values into the flags space. Doing so allows adding a BLK_MQ_F_MAX sentinel for simplified overflow checking in the messy debugfs helpers. Signed-off-by: Christoph Hellwig Reviewed-by: John Garry Link: https://lore.kernel.org/r/20250106083531.799976-5-hch@lst.de Signed-off-by: Jens Axboe

scsi: Rename .device_configure() into .sdev_configure()

2024-12-04T20:34:28Z

Improve naming consistency with the .sdev_prep() and .sdev_destroy() methods by renaming .device_configure() into .sdev_configure(). Cc: Christoph Hellwig Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022180839.2712439-3-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: Rename .slave_alloc() and .slave_destroy()

2024-12-04T20:34:28Z

Rename .slave_alloc() into .sdev_init() and .slave_destroy() into .sdev_destroy(). The new names make it clear that these are actions on SCSI devices. Make this change in the SCSI core, SCSI drivers and also in the ATA drivers. No functionality has been changed. This patch has been created as follows: * Change the text "slave_alloc" into "sdev_init" in all source files except those in drivers/net/ and Documentation/. * Change the text "slave_destroy" into "sdev_destroy" in all source files except those in drivers/net/ and Documentation/. * Rename lpfc_no_slave() into lpfc_no_sdev(). * Manually adjust whitespace where necessary to restore vertical alignment (dc395x driver and include/linux/libata.h). Acked-by: Damien Le Moal Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022180839.2712439-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen

ata: libata: Remove unused macro definitions

2024-10-09T08:26:27Z

ATA_TMOUT_BOOT and ATA_TMOUT_BOOT_QUICK are not used anywhere. Delete these definitions. Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20241009081535.376994-1-dlemoal@kernel.org Signed-off-by: Niklas Cassel

ata: libata: Improve CDL resource management

2024-09-07T01:16:56Z

The ncq_sense_buf buffer field of struct ata_port is allocated and used only for devices that support the Command Duration Limits (CDL) feature. However, the cdl buffer of struct ata_device, which is used to cache the command duration limits log page for devices supporting CDL is always allocated as part of struct ata_device, which is wasteful of memory for devices that do not support this feature. Clean this up by defining both buffers as part of the new ata_cdl structure and allocating this structure only for devices that support the CDL feature. This new structure is attached to struct ata_device using the cdl pointer. The functions ata_dev_init_cdl_resources() and ata_dev_cleanup_cdl_resources() are defined to manage this new structure allocation, initialization and freeing when a port is removed or a device disabled. ata_dev_init_cdl_resources() is called from ata_dev_config_cdl() only for devices that support CDL. ata_dev_cleanup_cdl_resources() is called from ata_dev_free_resources() to free the ata_cdl structure when a device is being disabled by EH. Note that the name of the former cdl log buffer of struct ata_device is changed to desc_log_buf to make it clearer that it is a buffer for the limit descriptors log page. This change reduces the size of struct ata_device, thus reducing memory usage for ATA devices that do not support the CDL feature. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel

ata: libata: Move sector_buf from struct ata_port to struct ata_device

2024-09-07T01:16:55Z

The 512B buffer sector_buf field of struct ata_port is used for scanning devices as well as during error recovery with ata EH. This buffer is thus useless if a port does not have a device connected to it. And also given that commands using this buffer are issued to devices, and not to ports, move this buffer definition from struct ata_port to struct ata_device. This change slightly increases system memory usage for systems using a port-multiplier as in that case we do not need a per-device buffer for scanning devices (PMP does not allow parallel scanning) nor for EH (as when entering EH we are guaranteed that all commands to all devices connected to the PMP have completed or have been aborted). However, this change reduces memory usage on systems that have many ports with only few devices rives connected, which is a much more common use case than the PMP use case. Suggested-by: Niklas Cassel Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel

ata: libata: Rename ata_eh_read_sense_success_ncq_log()

2024-09-07T01:16:55Z

The function ata_eh_read_sense_success_ncq_log() does more that just reading the sense data for successful NCQ commands log page as it also sets the sense data for all commands listed in the log page. Rename this function to ata_eh_get_ncq_success_sense() to better describe what the function does. Furthermore, since this function is only called from ata_eh_get_success_sense() in libata-eh.c, there is no need to export it and its declaration can be moved to drivers/ata/libata.h. To be consistent with this change, the function ata_eh_read_sense_success_non_ncq() is also renamed to ata_eh_get_non_ncq_success_sense(). Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Hannes Reinecke