user/sven/linux.git/include/linux/libata.h, branch v6.5.11

ata: libata-scsi: Disable scsi device manage_system_start_stop

2023-10-19T21:10:56Z

commit aa3998dbeb3abce63653b7f6d4542e7dcd022590 upstream. The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata-sata: increase PMP SRST timeout to 10s

2023-10-06T11:16:28Z

commit 753a4d531bc518633ea88ac0ed02b25a16823d51 upstream. On certain SATA controllers, softreset fails after wakeup from S2RAM with the message "softreset failed (1st FIS failed)", sometimes resulting in drives not being detected again. With the increased timeout, this issue is avoided. Instead, "softreset failed (device not ready)" is now logged 1-2 times; this later failure seems to cause fewer problems however, and the drives are detected reliably once they've spun up and the probe is retried. The issue was observed with the primary SATA controller of the QNAP TS-453B, which is an "Intel Corporation Celeron/Pentium Silver Processor SATA Controller [8086:31e3] (rev 06)" integrated in the Celeron J4125 CPU, and the following drives: - Seagate IronWolf ST12000VN0008 - Seagate IronWolf ST8000NE0004 The SATA controller seems to be more relevant to this issue than the drives, as the same drives are always detected reliably on the secondary SATA controller on the same board (an ASMedia 106x) without any "softreset failed" errors even without the increased timeout. Fixes: e7d3ef13d52a ("libata: change drive ready wait after hard reset to 5s") Cc: stable@vger.kernel.org Signed-off-by: Matthias Schiffer Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata-scsi: link ata port and scsi device

2023-10-06T11:16:22Z

commit fb99ef17865035a6657786d4b2af11a27ba23f9b upstream. There is no direct device ancestry defined between an ata_device and its scsi device which prevents the power management code from correctly ordering suspend and resume operations. Create such ancestry with the ata device as the parent to ensure that the scsi device (child) is suspended before the ata device and that resume handles the ata device before the scsi device. The parent-child (supplier-consumer) relationship is established between the ata_port (parent) and the scsi device (child) with the function device_add_link(). The parent used is not the ata_device as the PM operations are defined per port and the status of all devices connected through that port is controlled from the port operations. The device link is established with the new function ata_scsi_slave_alloc(), and this function is used to define the ->slave_alloc callback of the scsi host template of all ata drivers. Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Reviewed-by: John Garry Signed-off-by: Greg Kroah-Hartman

ata: libata: disallow dev-initiated LPM transitions to unsupported states

2023-09-23T09:14:37Z

commit 24e0e61db3cb86a66824531989f1df80e0939f26 upstream. In AHCI 1.3.1, the register description for CAP.SSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Slumber state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Slumber requests." In AHCI 1.3.1, the register description for CAP.PSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Partial state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Partial requests." Ensure that we always set the corresponding bits in PxSCTL.IPM, such that a device is not allowed to initiate transitions to power states which are unsupported by the HBA. DevSleep is always initiated by the HBA, however, for completeness, set the corresponding bit in PxSCTL.IPM such that agressive link power management cannot transition to DevSleep if DevSleep is not supported. sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp. However, only libahci has the ability to read the CAP/CAP2 register to see if these features are supported. Therefore, in order to not introduce any regressions on ata_piix or libata-pmp, create flags that indicate that the respective feature is NOT supported. This way, the behavior for ata_piix and libata-pmp should remain unchanged. This change is based on a patch originally submitted by Runa Guo-oc. Signed-off-by: Niklas Cassel Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-06-30T18:57:07Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, pm80xx, libata-scsi, smartpqi, lpfc, qla2xxx). We have a couple of major core changes impacting other systems: - Command Duration Limits, which spills into block and ATA - block level Persistent Reservation Operations, which touches block, nvme, target and dm Both of these are added with merge commits containing a cover letter explaining what's going on" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (187 commits) scsi: core: Improve warning message in scsi_device_block() scsi: core: Replace scsi_target_block() with scsi_block_targets() scsi: core: Don't wait for quiesce in scsi_device_block() scsi: core: Don't wait for quiesce in scsi_stop_queue() scsi: core: Merge scsi_internal_device_block() and device_block() scsi: sg: Increase number of devices scsi: bsg: Increase number of devices scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue scsi: ufs: ufs-pci: Add support for Intel Arrow Lake scsi: sd: sd_zbc: Use PAGE_SECTORS_SHIFT scsi: ufs: wb: Add explicit flush_threshold sysfs attribute scsi: ufs: ufs-qcom: Switch to the new ICE API scsi: ufs: dt-bindings: qcom: Add ICE phandle scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_RTC quirk scsi: ufs: ufs-mediatek: Set UFSHCD_QUIRK_MCQ_BROKEN_INTR quirk scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_RTC scsi: ufs: core: Add host quirk UFSHCD_QUIRK_MCQ_BROKEN_INTR scsi: ufs: core: Remove dedicated hwq for dev command scsi: ufs: core: mcq: Fix the incorrect OCS value for the device command scsi: ufs: dt-bindings: samsung,exynos: Drop unneeded quotes ...

Merge tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-06-30T18:48:16Z

Pull ata updates from Damien Le Moal: - Add support for the .remove_new callback to the ata_platform code to simplify device removal interface (Uwe) - Code simplification in ata_dev_revalidate() (Yahu) - Fix code indentation and coding style in the pata_parport protocol modules to avoid warnings from static code analyzers (me) - Clarify ata_eh_qc_retry() behavior with better comments (Niklas) - Simplify and improve ata_change_queue_depth() behavior to have a consistent behavior between libsas managed devices and libata managed devices (e.g. AHCI connected devices) (me) - Cleanup libata-scsi and libata-eh code to use the ata_ncq_enabled() and ata_ncq_supported() helpers instead of open coding flags tests (me) - Cleanup ahci_reset_controller() code (me) - Change the pata_octeon_cf and sata_svw drivers to use of_property_read_reg() to simplify the code (Rob, me) - Remove unnecessary include files from ahci_octeon driver (me) - Modify the DesignWare ahci dt bindings to add support for the Rockchip RK3588 AHCI (Sebastian) * tag 'ata-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (29 commits) dt-bindings: phy: rockchip: rk3588 has two reset lines dt-bindings: ata: dwc-ahci: add Rockchip RK3588 dt-bindings: ata: dwc-ahci: add PHY clocks ata: ahci_octeon: Remove unnecessary include ata: pata_octeon_cf: Add missing header include ata: ahci: Cleanup ahci_reset_controller() ata: Use of_property_read_reg() to parse "reg" ata: libata-scsi: Use ata_ncq_supported in ata_scsi_dev_config() ata: libata-eh: Use ata_ncq_enabled() in ata_eh_speed_down() ata: libata-sata: Improve ata_change_queue_depth() ata: libata-sata: Simplify ata_change_queue_depth() ata: libata-eh: Clarify ata_eh_qc_retry() behavior at call site ata: pata_parport: Fix on26 module code indentation and style ata: pata_parport: Fix on20 module code indentation and style ata: pata_parport: Fix ktti module code indentation and style ata: pata_parport: Fix kbic module code indentation and style ata: pata_parport: Fix friq module code indentation and style ata: pata_parport: Fix fit3 module code indentation and style ata: pata_parport: Fix fit2 module code indentation and style ata: pata_parport: Fix epia module code indentation and style ...

ata: libata-scsi: Avoid deadlock on rescan after device resume

2023-06-18T03:00:49Z

When an ATA port is resumed from sleep, the port is reset and a power management request issued to libata EH to reset the port and rescanning the device(s) attached to the port. Device rescanning is done by scheduling an ata_scsi_dev_rescan() work, which will execute scsi_rescan_device(). However, scsi_rescan_device() takes the generic device lock, which is also taken by dpm_resume() when the SCSI device is resumed as well. If a device rescan execution starts before the completion of the SCSI device resume, the rcu locking used to refresh the cached VPD pages of the device, combined with the generic device locking from scsi_rescan_device() and from dpm_resume() can cause a deadlock. Avoid this situation by changing struct ata_port scsi_rescan_task to be a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is modified to check if the SCSI device associated with the ATA device that must be rescanned is not suspended. If the SCSI device is still suspended, ata_scsi_dev_rescan() returns early and reschedule itself for execution after an arbitrary delay of 5ms. Reported-by: Kai-Heng Feng Reported-by: Joe Breuer Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Kai-Heng Feng Tested-by: Joe Breuer

ata: libata-sata: Simplify ata_change_queue_depth()

2023-06-04T23:02:21Z

Commit 141f3d6256e5 ("ata: libata-sata: Fix device queue depth control") added a struct ata_device argument to ata_change_queue_depth() to address problems with changing the queue depth of ATA devices managed through libsas. This was due to problems with ata_scsi_find_dev() which are now fixed with commit 7f875850f20a ("ata: libata-scsi: Use correct device no in ata_find_dev()"). Undo some of the changes of commit 141f3d6256e5: remove the added struct ata_device aregument and use again ata_scsi_find_dev() to find the target ATA device structure. While doing this, also make sure that ata_scsi_find_dev() is called with ap->lock held, as it should. libsas and libata call sites of ata_change_queue_depth() are updated to match the modified function arguments. Signed-off-by: Damien Le Moal Reviewed-by: Jason Yan Reviewed-by: John Garry

scsi: ata: libata: Handle completion of CDL commands using policy 0xD

2023-05-22T21:05:20Z

A CDL timeout for policy 0xF is defined as a NCQ error, just with a CDL specific sk/asc/ascq in the sense data. Therefore, the existing code in libata does not need to be modified to handle a policy 0xF CDL timeout. For Command Duration Limits policy 0xD: The device shall complete the command without error with the additional sense code set to DATA CURRENTLY UNAVAILABLE. Since a CDL timeout for policy 0xD is not an error, we cannot use the NCQ Command Error log (10h). Instead, we need to read the Sense Data for Successful NCQ Commands log (0Fh). In the success case, just like in the error case, we cannot simply read a log page from the interrupt handler itself, since reading a log page involves sending a READ LOG DMA EXT or READ LOG EXT command. Therefore, we add a new EH action ATA_EH_GET_SUCCESS_SENSE. When a command completes without error, and when the ATA_SENSE bit is set, this new action is set as pending, and EH is scheduled. This way, similar to the NCQ error case, the log page will be read from EH context. An alternative would have been to add a new kthread or workqueue to handle this. However, extending EH can be done with minimal changes and avoids the need to synchronize a new kthread/workqueue with EH. Co-developed-by: Damien Le Moal Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Christoph Hellwig Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-20-nks@flawful.org Signed-off-by: Martin K. Petersen

scsi: ata: libata: Set read/write commands CDL index

2023-05-22T21:05:20Z

For devices supporting the command duration limits feature, translate the dld field of read and write operation to set the command duration limit index field of the command task file when the duration limit feature is enabled. The function ata_set_tf_cdl() is introduced to do this. For unqueued (non NCQ) read and write operations, this function sets the command duration limit index set as the lower 3 bits of the feature field. For queued NCQ read/write commands, the index is set as the lower 3 bits of the auxiliary field. The flag ATA_QCFLAG_HAS_CDL is introduced to indicate that a command taskfile has a non zero cdl field. Signed-off-by: Damien Le Moal Reviewed-by: Igor Pylypiv Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Co-developed-by: Niklas Cassel Signed-off-by: Niklas Cassel Link: https://lore.kernel.org/r/20230511011356.227789-19-nks@flawful.org Signed-off-by: Martin K. Petersen