user/sven/linux.git/include/linux/lockd, branch v4.14.15

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

sunrpc: mark all struct svc_procinfo instances as const

2017-05-15T15:42:31Z

struct svc_procinfo contains function pointers, and marking it as constant avoids it being able to be used as an attach vector for code injections. Signed-off-by: Christoph Hellwig

sunrpc: properly type pc_encode callbacks

2017-05-15T15:42:25Z

Drop the resp argument as it can trivially be derived from the rqstp argument. With that all functions now have the same prototype, and we can remove the unsafe casting to kxdrproc_t. Signed-off-by: Christoph Hellwig Acked-by: Trond Myklebust

sunrpc: properly type pc_decode callbacks

2017-05-15T15:42:24Z

Drop the argp argument as it can trivially be derived from the rqstp argument. With that all functions now have the same prototype, and we can remove the unsafe casting to kxdrproc_t. Signed-off-by: Christoph Hellwig

lockd: Introduce nlmclnt_operations

2017-04-21T14:45:01Z

NFS would enjoy the ability to modify the behavior of the NLM client's unlock RPC task in order to delay the transmission of the unlock until IO that was submitted under that lock has completed. This ability can ensure that the NLM client will always complete the transmission of an unlock even if the waiting caller has been interrupted with fatal signal. For this purpose, a pointer to a struct nlmclnt_operations can be assigned in a nfs_module's nfs_rpc_ops that will install those nlmclnt_operations on the nlm_host. The struct nlmclnt_operations defines three callback operations that will be used in a following patch: nlmclnt_alloc_call - used to call back after a successful allocation of a struct nlm_rqst in nlmclnt_proc(). nlmclnt_unlock_prepare - used to call back during NLM unlock's rpc_call_prepare. The NLM client defers calling rpc_call_start() until this callback returns false. nlmclnt_release_call - used to call back when the NLM client's struct nlm_rqst is freed. Signed-off-by: Benjamin Coddington Reviewed-by: Jeff Layton Signed-off-by: Trond Myklebust

nlm: Ensure callback code also checks that the files match

2017-02-13T22:02:50Z

It is not sufficient to just check that the lock pids match when granting a callback, we also need to ensure that we're granting the callback on the right file. Reported-by: Pankaj Singh Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker

lockd: constify nlmsvc_binding structure

2016-01-07T15:10:50Z

The nlmsvc_binding structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: J. Bruce Fields

lockd: get rid of reference-counted NSM RPC clients

2015-10-23T19:57:27Z

Currently we have reference-counted per-net NSM RPC client which created on the first monitor request and destroyed after the last unmonitor request. It's needed because RPC client need to know 'utsname()->nodename', but utsname() might be NULL when nsm_unmonitor() called. So instead of holding the rpc client we could just save nodename in struct nlm_host and pass it to the rpc_create(). Thus ther is no need in keeping rpc client until last unmonitor request. We could create separate RPC clients for each monitor/unmonitor requests. Signed-off-by: Andrey Ryabinin Signed-off-by: J. Bruce Fields

lockd: create NSM handles per net namespace

2015-10-12T21:31:05Z

Commit cb7323fffa85 ("lockd: create and use per-net NSM RPC clients on MON/UNMON requests") introduced per-net NSM RPC clients. Unfortunately this doesn't make any sense without per-net nsm_handle. E.g. the following scenario could happen Two hosts (X and Y) in different namespaces (A and B) share the same nsm struct. 1. nsm_monitor(host_X) called => NSM rpc client created, nsm->sm_monitored bit set. 2. nsm_mointor(host-Y) called => nsm->sm_monitored already set, we just exit. Thus in namespace B ln->nsm_clnt == NULL. 3. host X destroyed => nsm->sm_count decremented to 1 4. host Y destroyed => nsm_unmonitor() => nsm_mon_unmon() => NULL-ptr dereference of *ln->nsm_clnt So this could be fixed by making per-net nsm_handles list, instead of global. Thus different net namespaces will not be able share the same nsm_handle. Signed-off-by: Andrey Ryabinin Cc: Signed-off-by: J. Bruce Fields

lockd: eliminate LOCKD_DEBUG

2014-11-24T22:24:08Z

LOCKD_DEBUG is always the same value as CONFIG_SUNRPC_DEBUG, so we can just use it instead. Signed-off-by: Jeff Layton Signed-off-by: Trond Myklebust