user/sven/linux.git/include/linux/mdio.h, branch v5.3.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

net: mdio: rename mdio_device reset to reset_gpio

2019-04-19T00:42:54Z

This renames the GPIO reset of mdio devices from 'reset' to 'reset_gpio' to better differentiate between GPIO and reset-controller driven reset line. Signed-off-by: David Bauer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add support for reset-controller

2019-04-19T00:41:51Z

This commit adds support for PHY reset pins handled by a reset controller. Signed-off-by: David Bauer Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

net: phy: add helper mii_10gbt_stat_mod_linkmode_lpa_t

2019-02-19T00:43:54Z

Similar to the existing helpers for the Clause 22 registers add helper mii_10gbt_stat_mod_linkmode_lpa_t. Note that this helper is defined in linux/mdio.h, not like the Clause 22 helpers in linux/mii.h. Reason is that the Clause 45 register constants are defined in uapi/linux/mdio.h. And uapi/linux/mdio.h includes linux/mii.h before defining the C45 register constants. v2: - remove helpers that don't have users in this series Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: add helper linkmode_adv_to_mii_10gbt_adv_t

2019-02-17T18:26:34Z

Add a helper linkmode_adv_to_mii_10gbt_adv_t(), similar to linkmode_adv_to_mii_adv_t. Signed-off-by: Heiner Kallweit Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

net: phy: remove PM ops from MDIO bus

2018-06-05T12:50:16Z

Current implementation of MDIO bus PM ops doesn't actually implement bus-specific PM ops but just calls PM ops defined on a device level what doesn't seem to be fully in line with the core PM model. When looking e.g. at __device_suspend() the PM core looks for PM ops of a device in a specific order: 1. device PM domain 2. device type 3. device class 4. device bus I think it has good reason that there's no PM ops on device level. Now that a device type representation of PHY's as special type of MDIO devices was added (only user of MDIO bus PM ops), the MDIO bus PM ops can be removed including member pm of struct mdio_device. If for some other type of MDIO device PM ops are needed, it should be modeled as struct device_type as well. Signed-off-by: Heiner Kallweit Signed-off-by: David S. Miller

net: mdiobus: add unlocked accessors

2018-01-03T16:00:22Z

Add unlocked versions of the bus accessors, which allows access to the bus with all the tracing. These accessors validate that the bus mutex is held, which is a basic requirement for all mii bus accesses. Reviewed-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: David S. Miller

phylib: rename reset-(post-)delay-us to reset-(de)assert-us

2017-12-27T16:06:50Z

As suggested by Rob Herring [1] rename the previously introduced reset-{,post-}delay-us bindings to the clearer reset-{,de}assert-us [1] https://patchwork.kernel.org/patch/10104905/ Signed-off-by: Richard Leitner Reviewed-by: Rob Herring Signed-off-by: David S. Miller

phylib: Add device reset delay support

2017-12-13T16:22:53Z

Some PHYs need a minimum time after the reset gpio was asserted and/or deasserted. To ensure we meet these timing requirements add two new optional devicetree parameters for the phy: reset-delay-us and reset-post-delay-us. Signed-off-by: Richard Leitner Reviewed-by: Geert Uytterhoeven Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller

phylib: Add device reset GPIO support

2017-12-05T17:51:19Z

The PHY devices sometimes do have their reset signal (maybe even power supply?) tied to some GPIO and sometimes it also does happen that a boot loader does not leave it deasserted. So far this issue has been attacked from (as I believe) a wrong angle: by teaching the MAC driver to manipulate the GPIO in question; that solution, when applied to the device trees, led to adding the PHY reset GPIO properties to the MAC device node, with one exception: Cadence MACB driver which could handle the "reset-gpios" prop in a PHY device subnode. I believe that the correct approach is to teach the 'phylib' to get the MDIO device reset GPIO from the device tree node corresponding to this device -- which this patch is doing... Note that I had to modify the AT803x PHY driver as it would stop working otherwise -- it made use of the reset GPIO for its own purposes... Signed-off-by: Sergei Shtylyov Acked-by: Rob Herring [geert: Propagate actual errors from fwnode_get_named_gpiod()] [geert: Avoid destroying initial setup] [geert: Consolidate GPIO descriptor acquiring code] Signed-off-by: Geert Uytterhoeven Tested-by: Richard Leitner Signed-off-by: David S. Miller