user/sven/linux.git/include/linux/memblock.h, branch v5.10.97

memblock: fix memblock_phys_alloc() section mismatch error

2022-01-05T11:40:29Z

[ Upstream commit d7f55471db2719629f773c2d6b5742a69595bfd3 ] Fix modpost Section mismatch error in memblock_phys_alloc() [...] WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range() The function memblock_phys_alloc() references the function __init memblock_phys_alloc_range(). This is often because memblock_phys_alloc lacks a __init annotation or the annotation of memblock_phys_alloc_range is wrong. ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. [...] memblock_phys_alloc() is a one-line wrapper, make it __always_inline to avoid these section mismatches. Reported-by: k2ci Suggested-by: Mike Rapoport Signed-off-by: Jackie Liu [rppt: slightly massaged changelog ] Signed-off-by: Mike Rapoport Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev Signed-off-by: Sasha Levin

memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions

2021-07-28T12:35:46Z

commit 79e482e9c3ae86e849c701c846592e72baddda5a upstream. Commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") didn't take into account that when there is movable_node parameter in the kernel command line, for_each_mem_range() would skip ranges marked with MEMBLOCK_HOTPLUG. The page table setup code in POWER uses for_each_mem_range() to create the linear mapping of the physical memory and since the regions marked as MEMORY_HOTPLUG are skipped, they never make it to the linear map. A later access to the memory in those ranges will fail: BUG: Unable to handle kernel data access on write at 0xc000000400000000 Faulting instruction address: 0xc00000000008a3c0 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 53 Comm: kworker/u2:0 Not tainted 5.13.0 #7 NIP: c00000000008a3c0 LR: c0000000003c1ed8 CTR: 0000000000000040 REGS: c000000008a57770 TRAP: 0300 Not tainted (5.13.0) MSR: 8000000002009033 CR: 84222202 XER: 20040000 CFAR: c0000000003c1ed4 DAR: c000000400000000 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000003c1ed8 c000000008a57a10 c0000000019da700 c000000400000000 GPR04: 0000000000000280 0000000000000180 0000000000000400 0000000000000200 GPR08: 0000000000000100 0000000000000080 0000000000000040 0000000000000300 GPR12: 0000000000000380 c000000001bc0000 c0000000001660c8 c000000006337e00 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000040000000 0000000020000000 c000000001a81990 c000000008c30000 GPR24: c000000008c20000 c000000001a81998 000fffffffff0000 c000000001a819a0 GPR28: c000000001a81908 c00c000001000000 c000000008c40000 c000000008a64680 NIP clear_user_page+0x50/0x80 LR __handle_mm_fault+0xc88/0x1910 Call Trace: __handle_mm_fault+0xc44/0x1910 (unreliable) handle_mm_fault+0x130/0x2a0 __get_user_pages+0x248/0x610 __get_user_pages_remote+0x12c/0x3e0 get_arg_page+0x54/0xf0 copy_string_kernel+0x11c/0x210 kernel_execve+0x16c/0x220 call_usermodehelper_exec_async+0x1b0/0x2f0 ret_from_kernel_thread+0x5c/0x70 Instruction dump: 79280fa4 79271764 79261f24 794ae8e2 7ca94214 7d683a14 7c893a14 7d893050 7d4903a6 60000000 60000000 60000000 <7c001fec> 7c091fec 7c081fec 7c051fec ---[ end trace 490b8c67e6075e09 ]--- Making for_each_mem_range() include MEMBLOCK_HOTPLUG regions in the traversal fixes this issue. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1976100 Link: https://lkml.kernel.org/r/20210712071132.20902-1-rppt@kernel.org Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()") Signed-off-by: Mike Rapoport Tested-by: Greg Kurz Reviewed-by: David Hildenbrand Cc: [5.10+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

memblock: use separate iterators for memory and reserved regions

2020-10-14T01:38:35Z

for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Baoquan He Acked-by: Ingo Molnar [x86] Acked-by: Thomas Bogendoerfer [MIPS] Acked-by: Miguel Ojeda [.clang-format] Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org Signed-off-by: Linus Torvalds

memblock: implement for_each_reserved_mem_region() using __next_mem_region()

2020-10-14T01:38:35Z

Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Acked-by: Miguel Ojeda [.clang-format] Cc: Andy Lutomirski Cc: Baoquan He Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org Signed-off-by: Linus Torvalds

memblock: remove unused memblock_mem_size()

2020-10-14T01:38:35Z

The only user of memblock_mem_size() was x86 setup code, it is gone now and memblock_mem_size() funciton can be removed. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Baoquan He Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Miguel Ojeda Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-16-rppt@kernel.org Signed-off-by: Linus Torvalds

memblock: reduce number of parameters in for_each_mem_range()

2020-10-14T01:38:35Z

Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Acked-by: Thomas Bogendoerfer [MIPS] Cc: Andy Lutomirski Cc: Baoquan He Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Miguel Ojeda Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.org Signed-off-by: Linus Torvalds

memblock: make memblock_debug and related functionality private

2020-10-14T01:38:35Z

The only user of memblock_dbg() outside memblock was s390 setup code and it is converted to use pr_debug() instead. This allows to stop exposing memblock_debug and memblock_dbg() to the rest of the kernel. [akpm@linux-foundation.org: make memblock_dbg() safer and neater] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Baoquan He Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Miguel Ojeda Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-10-rppt@kernel.org Signed-off-by: Linus Torvalds

memblock: make for_each_memblock_type() iterator private

2020-10-14T01:38:35Z

for_each_memblock_type() is not used outside mm/memblock.c, move it there from include/linux/memblock.h Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Reviewed-by: Baoquan He Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Christoph Hellwig Cc: Daniel Axtens Cc: Dave Hansen Cc: Emil Renner Berthing Cc: Hari Bathini Cc: Ingo Molnar Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Marek Szyprowski Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Miguel Ojeda Cc: Palmer Dabbelt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Peter Zijlstra Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Will Deacon Cc: Yoshinori Sato Link: https://lkml.kernel.org/r/20200818151634.14343-9-rppt@kernel.org Signed-off-by: Linus Torvalds

mm/memblock: expose only miminal interface to add/walk physmem

2020-07-10T13:08:09Z

"physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Mike Rapoport Cc: Andrew Morton Signed-off-by: David Hildenbrand Reviewed-by: Mike Rapoport Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens

include/linux/memblock.h: fix minor typo and unclear comment

2020-06-04T03:09:49Z

Fix a minor typo "usabe->usable" for the current discription of member variable "memory" in struct memblock. BTW, I think it's unclear the member variable "base" in struct memblock_type is currently described as the physical address of memory region, change it to base address of the region is clearer since the variable is decorated as phys_addr_t. Signed-off-by: chenqiwu Signed-off-by: Andrew Morton Reviewed-by: Mike Rapoport Link: http://lkml.kernel.org/r/1588846952-32166-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds