user/sven/linux.git/include/linux/memblock.h, branch v5.9.8

mm/memblock: expose only miminal interface to add/walk physmem

2020-07-10T13:08:09Z

"physmem" in the memblock allocator is somewhat weird: it's not actually used for allocation, it's simply information collected during boot, which describes the unmodified physical memory map at boot time, without any standby/hotplugged memory. It's only used on s390 and is currently the only reason s390 keeps using CONFIG_ARCH_KEEP_MEMBLOCK. Physmem isn't numa aware and current users don't specify any flags. Let's hide it from the user, exposing only for_each_physmem(), and simplify. The interface for physmem is now really minimalistic: - memblock_physmem_add() to add ranges - for_each_physmem() / __next_physmem_range() to walk physmem ranges Don't place it into an __init section and don't discard it without CONFIG_ARCH_KEEP_MEMBLOCK. As we're reusing __next_mem_range(), remove the __meminit notifier to avoid section mismatch warnings once CONFIG_ARCH_KEEP_MEMBLOCK is no longer used with CONFIG_HAVE_MEMBLOCK_PHYS_MAP. While fixing up the documentation, sneak in some related cleanups. We can stop setting CONFIG_ARCH_KEEP_MEMBLOCK for s390 next. Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Mike Rapoport Cc: Andrew Morton Signed-off-by: David Hildenbrand Reviewed-by: Mike Rapoport Message-Id: <20200701141830.18749-2-david@redhat.com> Signed-off-by: Heiko Carstens

include/linux/memblock.h: fix minor typo and unclear comment

2020-06-04T03:09:49Z

Fix a minor typo "usabe->usable" for the current discription of member variable "memory" in struct memblock. BTW, I think it's unclear the member variable "base" in struct memblock_type is currently described as the physical address of memory region, change it to base address of the region is clearer since the variable is decorated as phys_addr_t. Signed-off-by: chenqiwu Signed-off-by: Andrew Morton Reviewed-by: Mike Rapoport Link: http://lkml.kernel.org/r/1588846952-32166-1-git-send-email-qiwuchen55@gmail.com Signed-off-by: Linus Torvalds

mm: make deferred init's max threads arch-specific

2020-06-04T03:09:45Z

Using padata during deferred init has only been tested on x86, so for now limit it to this architecture. If another arch wants this, it can find the max thread limit that's best for it and override deferred_page_init_max_threads(). Signed-off-by: Daniel Jordan Signed-off-by: Andrew Morton Tested-by: Josh Triplett Cc: Alexander Duyck Cc: Alex Williamson Cc: Dan Williams Cc: Dave Hansen Cc: David Hildenbrand Cc: Herbert Xu Cc: Jason Gunthorpe Cc: Jonathan Corbet Cc: Kirill Tkhai Cc: Michal Hocko Cc: Pavel Machek Cc: Pavel Tatashin Cc: Peter Zijlstra Cc: Randy Dunlap Cc: Robert Elliott Cc: Shile Zhang Cc: Steffen Klassert Cc: Steven Sistare Cc: Tejun Heo Cc: Zi Yan Link: http://lkml.kernel.org/r/20200527173608.2885243-8-daniel.m.jordan@oracle.com Signed-off-by: Linus Torvalds

mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option

2020-06-04T03:09:43Z

CONFIG_HAVE_MEMBLOCK_NODE_MAP is used to differentiate initialization of nodes and zones structures between the systems that have region to node mapping in memblock and those that don't. Currently all the NUMA architectures enable this option and for the non-NUMA systems we can presume that all the memory belongs to node 0 and therefore the compile time configuration option is not required. The remaining few architectures that use DISCONTIGMEM without NUMA are easily updated to use memblock_add_node() instead of memblock_add() and thus have proper correspondence of memblock regions to NUMA nodes. Still, free_area_init_node() must have a backward compatible version because its semantics with and without CONFIG_HAVE_MEMBLOCK_NODE_MAP is different. Once all the architectures will use the new semantics, the entire compatibility layer can be dropped. To avoid addition of extra run time memory to store node id for architectures that keep memblock but have only a single node, the node id field of the memblock_region is guarded by CONFIG_NEED_MULTIPLE_NODES and the corresponding accessors presume that in those cases it is always 0. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Tested-by: Hoan Tran [arm64] Acked-by: Catalin Marinas [arm64] Cc: Baoquan He Cc: Brian Cain Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Hocko Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200412194859.12663-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: cma: NUMA node interface

2020-04-10T22:36:21Z

I've noticed that there is no interface exposed by CMA which would let me to declare contigous memory on particular NUMA node. This patchset adds the ability to try to allocate contiguous memory on a specific node. It will fallback to other nodes if the specified one doesn't work. Implement a new method for declaring contigous memory on particular node and keep cma_declare_contiguous() as a wrapper. [akpm@linux-foundation.org: build fix] Signed-off-by: Aslan Bakirov Signed-off-by: Roman Gushchin Signed-off-by: Andrew Morton Acked-by: Michal Hocko Cc: Andreas Schaufler Cc: Mike Kravetz Cc: Rik van Riel Cc: Joonsoo Kim Link: http://lkml.kernel.org/r/20200407163840.92263-2-guro@fb.com Signed-off-by: Linus Torvalds

mm/memblock: define memblock_physmem_add()

2020-01-31T18:30:38Z

On the s390 platform memblock.physmem array is being built by directly calling into memblock_add_range() which is a low level function not intended to be used outside of memblock. Hence lets conditionally add helper functions for physmem array when HAVE_MEMBLOCK_PHYS_MAP is enabled. Also use MAX_NUMNODES instead of 0 as node ID similar to memblock_add() and memblock_reserve(). Make memblock_add_range() a static function as it is no longer getting used outside of memblock. Link: http://lkml.kernel.org/r/1578283835-21969-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Reviewed-by: Mike Rapoport Acked-by: Heiko Carstens Cc: Vasily Gorbik Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Collin Walling Cc: Gerald Schaefer Cc: Philipp Rudo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: support memblock alloc on the exact node for sparse_buffer_init()

2019-12-01T20:59:08Z

sparse_buffer_init() use memblock_alloc_try_nid_raw() to allocate memory for page management structure, if memory allocation fails from specified node, it will fall back to allocate from other nodes. Normally, the page management structure will not exceed 2% of the total memory, but a large continuous block of allocation is needed. In most cases, memory allocation from the specified node will succeed, but a node memory become highly fragmented will fail. we expect to allocate memory base section rather than by allocating a large block of memory from other NUMA nodes Add memblock_alloc_exact_nid_raw() for this situation, which allocate boot memory block on the exact node. If a large contiguous block memory allocate fail in sparse_buffer_init(), it will fall back to allocate small block memory base section. Link: http://lkml.kernel.org/r/66755ea7-ab10-8882-36fd-3e02b03775d5@huawei.com Signed-off-by: Yunfeng Ye Reviewed-by: Mike Rapoport Cc: Wei Yang Cc: Oscar Salvador Cc: Dan Williams Cc: David Hildenbrand Cc: Qian Cai Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

mm: memblock: make keeping memblock memory opt-in rather than opt-out

2019-05-14T16:47:50Z

Most architectures do not need the memblock memory after the page allocator is initialized, but only few enable ARCH_DISCARD_MEMBLOCK in the arch Kconfig. Replacing ARCH_DISCARD_MEMBLOCK with ARCH_KEEP_MEMBLOCK and inverting the logic makes it clear which architectures actually use memblock after system initialization and skips the necessity to add ARCH_DISCARD_MEMBLOCK to the architectures that are still missing that option. Link: http://lkml.kernel.org/r/1556102150-32517-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Acked-by: Michael Ellerman (powerpc) Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Richard Kuo Cc: Tony Luck Cc: Fenghua Yu Cc: Geert Uytterhoeven Cc: Ralf Baechle Cc: Paul Burton Cc: James Hogan Cc: Ley Foon Tan Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Yoshinori Sato Cc: Rich Felker Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Eric Biederman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: initialize MAX_ORDER_NR_PAGES at a time instead of doing larger sections

2019-05-14T16:47:49Z

Add yet another iterator, for_each_free_mem_range_in_zone_from, and then use it to support initializing and freeing pages in groups no larger than MAX_ORDER_NR_PAGES. By doing this we can greatly improve the cache locality of the pages while we do several loops over them in the init and freeing process. We are able to tighten the loops further as a result of the "from" iterator as we can perform the initial checks for first_init_pfn in our first call to the iterator, and continue without the need for those checks via the "from" iterator. I have added this functionality in the function called deferred_init_mem_pfn_range_in_zone that primes the iterator and causes us to exit if we encounter any failure. On my x86_64 test system with 384GB of memory per node I saw a reduction in initialization time from 1.85s to 1.38s as a result of this patch. Link: http://lkml.kernel.org/r/20190405221231.12227.85836.stgit@localhost.localdomain Signed-off-by: Alexander Duyck Reviewed-by: Pavel Tatashin Cc: Mike Rapoport Cc: Michal Hocko Cc: Dave Jiang Cc: Matthew Wilcox Cc: Ingo Molnar Cc: Cc: Khalid Aziz Cc: Mike Rapoport Cc: Vlastimil Babka Cc: Dan Williams Cc: Laurent Dufour Cc: Mel Gorman Cc: David S. Miller Cc: "Kirill A. Shutemov" Cc: Pavel Tatashin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds