user/sven/linux.git/include/linux/memory.h, branch v4.19.230

mm/memory_hotplug: fix try_offline_node()

2020-01-29T15:43:27Z

commit 2c91f8fc6c999fe10185d8ad99fda1759f662f70 upstream. -- snip -- Only contextual issues: - Unrelated check_and_unmap_cpu_on_node() changes are missing. - Unrelated walk_memory_blocks() has not been moved/refactored yet. -- snip -- try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") memory that is added is not assoziated with a zone/node (memmap not initialized). The introducing commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node") already missed that we could have multiple nodes for a section and that the zone/node span is updated when onlining pages, not when adding them. I tested this by hotplugging two DIMMs to a memory-less and cpu-less NUMA node. The node is properly onlined when adding the DIMMs. When removing the DIMMs, the node is properly offlined. Masayoshi Mizuma reported: : Without this patch, memory hotplug fails as panic: : : BUG: kernel NULL pointer dereference, address: 0000000000000000 : ... : Call Trace: : remove_memory_block_devices+0x81/0xc0 : try_remove_memory+0xb4/0x130 : __remove_memory+0xa/0x20 : acpi_memory_device_remove+0x84/0x100 : acpi_bus_trim+0x57/0x90 : acpi_bus_trim+0x2e/0x90 : acpi_device_hotplug+0x2b2/0x4d0 : acpi_hotplug_work_fn+0x1a/0x30 : process_one_work+0x171/0x380 : worker_thread+0x49/0x3f0 : kthread+0xf8/0x130 : ret_from_fork+0x35/0x40 [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com Fixes: 60a5a19e7419 ("memory-hotplug: remove sysfs file of node") Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b319 Signed-off-by: David Hildenbrand Tested-by: Masayoshi Mizuma Cc: Tang Chen Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Keith Busch Cc: Jiri Olsa Cc: "Peter Zijlstra (Intel)" Cc: Jani Nikula Cc: Nayna Jain Cc: Michal Hocko Cc: Oscar Salvador Cc: Stephen Rothwell Cc: Dan Williams Cc: Pavel Tatashin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: remove memory block devices before arch_remove_memory()

2020-01-29T15:43:26Z

commit 4c4b7f9ba9486c565aead99a198ceeef73ae81f6 upstream. Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Dan Williams Acked-by: Michal Hocko Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: David Hildenbrand Cc: "mike.travis@hpe.com" Cc: Andrew Banman Cc: Ingo Molnar Cc: Alex Deucher Cc: "David S. Miller" Cc: Mark Brown Cc: Chris Wilson Cc: Oscar Salvador Cc: Jonathan Cameron Cc: Arun KS Cc: Mathieu Malaterre Cc: Andy Lutomirski Cc: Anshuman Khandual Cc: Ard Biesheuvel Cc: Baoquan He Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Chintan Pandya Cc: Christophe Leroy Cc: Dave Hansen Cc: Fenghua Yu Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Joonsoo Kim Cc: Jun Yao Cc: "Kirill A. Shutemov" Cc: Logan Gunthorpe Cc: Mark Rutland Cc: Masahiro Yamada Cc: Michael Ellerman Cc: Mike Rapoport Cc: Nicholas Piggin Cc: Oscar Salvador Cc: Paul Mackerras Cc: Pavel Tatashin Cc: Peter Zijlstra Cc: Qian Cai Cc: Rich Felker Cc: Rob Herring Cc: Robin Murphy Cc: Thomas Gleixner Cc: Tony Luck Cc: Vasily Gorbik Cc: Wei Yang Cc: Will Deacon Cc: Yoshinori Sato Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: create memory block devices after arch_add_memory()

2020-01-29T15:43:26Z

commit db051a0dac13db24d58470d75cee0ce7c6b031a1 upstream. Only memory to be added to the buddy and to be onlined/offlined by user space using /sys/devices/system/memory/... needs (and should have!) memory block devices. Factor out creation of memory block devices. Create all devices after arch_add_memory() succeeded. We can later drop the want_memblock parameter, because it is now effectively stale. Only after memory block devices have been added, memory can be onlined by user space. This implies, that memory is not visible to user space at all before arch_add_memory() succeeded. While at it - use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory() - introduce find_memory_block_by_id() to search via block id - Use find_memory_block_by_id() in init_memory_block() to catch duplicates Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Pavel Tatashin Acked-by: Michal Hocko Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: David Hildenbrand Cc: "mike.travis@hpe.com" Cc: Ingo Molnar Cc: Andrew Banman Cc: Oscar Salvador Cc: Qian Cai Cc: Wei Yang Cc: Arun KS Cc: Mathieu Malaterre Cc: Alex Deucher Cc: Andy Lutomirski Cc: Anshuman Khandual Cc: Ard Biesheuvel Cc: Baoquan He Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Catalin Marinas Cc: Chintan Pandya Cc: Christophe Leroy Cc: Chris Wilson Cc: Dan Williams Cc: Dave Hansen Cc: "David S. Miller" Cc: Fenghua Yu Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Jonathan Cameron Cc: Joonsoo Kim Cc: Jun Yao Cc: "Kirill A. Shutemov" Cc: Logan Gunthorpe Cc: Mark Brown Cc: Mark Rutland Cc: Masahiro Yamada Cc: Michael Ellerman Cc: Mike Rapoport Cc: Nicholas Piggin Cc: Oscar Salvador Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Rich Felker Cc: Rob Herring Cc: Robin Murphy Cc: Thomas Gleixner Cc: Tony Luck Cc: Vasily Gorbik Cc: Will Deacon Cc: Yoshinori Sato Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: allow arch_remove_memory() without CONFIG_MEMORY_HOTREMOVE

2020-01-29T15:43:26Z

commit 80ec922dbd87fd38d15719c86a94457204648aeb upstream. -- snip -- Missing arm64 memory hot(un)plug support. -- snip -- We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Pavel Tatashin Cc: Tony Luck Cc: Fenghua Yu Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Heiko Carstens Cc: Yoshinori Sato Cc: Rich Felker Cc: Dave Hansen Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Borislav Petkov Cc: "H. Peter Anvin" Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Michal Hocko Cc: David Hildenbrand Cc: Oscar Salvador Cc: "Kirill A. Shutemov" Cc: Alex Deucher Cc: "David S. Miller" Cc: Mark Brown Cc: Chris Wilson Cc: Christophe Leroy Cc: Nicholas Piggin Cc: Vasily Gorbik Cc: Rob Herring Cc: Masahiro Yamada Cc: "mike.travis@hpe.com" Cc: Andrew Banman Cc: Arun KS Cc: Qian Cai Cc: Mathieu Malaterre Cc: Baoquan He Cc: Logan Gunthorpe Cc: Anshuman Khandual Cc: Ard Biesheuvel Cc: Catalin Marinas Cc: Chintan Pandya Cc: Dan Williams Cc: Ingo Molnar Cc: Jonathan Cameron Cc: Joonsoo Kim Cc: Jun Yao Cc: Mark Rutland Cc: Mike Rapoport Cc: Oscar Salvador Cc: Robin Murphy Cc: Wei Yang Cc: Will Deacon Cc: Yu Zhao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: make unregister_memory_section() never fail

2020-01-29T15:43:25Z

commit cb7b3a3685b20d3b5900ff24b2cb96d002960189 upstream. Failing while removing memory is mostly ignored and cannot really be handled. Let's treat errors in unregister_memory_section() in a nice way, warning, but continuing. Link: http://lkml.kernel.org/r/20190409100148.24703-3-david@redhat.com Signed-off-by: David Hildenbrand Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Ingo Molnar Cc: Andrew Banman Cc: Mike Travis Cc: David Hildenbrand Cc: Oscar Salvador Cc: Michal Hocko Cc: Pavel Tatashin Cc: Qian Cai Cc: Wei Yang Cc: Arun KS Cc: Mathieu Malaterre Cc: Andy Lutomirski Cc: Benjamin Herrenschmidt Cc: Borislav Petkov Cc: Christophe Leroy Cc: Dave Hansen Cc: Fenghua Yu Cc: Geert Uytterhoeven Cc: Heiko Carstens Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Joonsoo Kim Cc: "Kirill A. Shutemov" Cc: Martin Schwidefsky Cc: Masahiro Yamada Cc: Michael Ellerman Cc: Mike Rapoport Cc: Nicholas Piggin Cc: Oscar Salvador Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Rich Felker Cc: Rob Herring Cc: Stefan Agner Cc: Thomas Gleixner Cc: Tony Luck Cc: Vasily Gorbik Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: David Hildenbrand Signed-off-by: Greg Kroah-Hartman

x86/platform/UV: Add adjustable set memory block size function

2018-06-21T14:14:45Z

Add a new function to "adjust" the current fixed UV memory block size of 2GB so it can be changed to a different physical boundary. This is out of necessity so arch dependent code can accommodate specific BIOS requirements which can align these new PMEM modules at less than the default boundaries. A "set order" type of function was used to insure that the memory block size will be a power of two value without requiring a validity check. 64GB was chosen as the upper limit for memory block size values to accommodate upcoming 4PB systems which have 6 more bits of physical address space (46 becoming 52). Signed-off-by: Mike Travis Reviewed-by: Andrew Banman Cc: Andrew Morton Cc: Dimitri Sivanich Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Russ Anderson Cc: Thomas Gleixner Cc: dan.j.williams@intel.com Cc: jgross@suse.com Cc: kirill.shutemov@linux.intel.com Cc: mhocko@suse.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/lkml/20180524201711.609546602@stormcage.americas.sgi.com Signed-off-by: Ingo Molnar

mm/memory_hotplug: optimize memory hotplug

2018-04-06T04:36:25Z

During memory hotplugging we traverse struct pages three times: 1. memset(0) in sparse_add_one_section() 2. loop in __add_section() to set do: set_page_node(page, nid); and SetPageReserved(page); 3. loop in memmap_init_zone() to call __init_single_pfn() This patch removes the first two loops, and leaves only loop 3. All struct pages are initialized in one place, the same as it is done during boot. The benefits: - We improve memory hotplug performance because we are not evicting the cache several times and also reduce loop branching overhead. - Remove condition from hotpath in __init_single_pfn(), that was added in order to fix the problem that was reported by Bharata in the above email thread, thus also improve performance during normal boot. - Make memory hotplug more similar to the boot memory initialization path because we zero and initialize struct pages only in one function. - Simplifies memory hotplug struct page initialization code, and thus enables future improvements, such as multi-threading the initialization of struct pages in order to improve hotplug performance even further on larger machines. [pasha.tatashin@oracle.com: v5] Link: http://lkml.kernel.org/r/20180228030308.1116-7-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180215165920.8570-7-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin Reviewed-by: Ingo Molnar Cc: Michal Hocko Cc: Baoquan He Cc: Bharata B Rao Cc: Daniel Jordan Cc: Dan Williams Cc: Greg Kroah-Hartman Cc: "H. Peter Anvin" Cc: Kirill A. Shutemov Cc: Mel Gorman Cc: Steven Sistare Cc: Thomas Gleixner Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm/memory_hotplug: don't read nid from struct page during hotplug

2018-04-06T04:36:25Z

During memory hotplugging the probe routine will leave struct pages uninitialized, the same as it is currently done during boot. Therefore, we do not want to access the inside of struct pages before __init_single_page() is called during onlining. Because during hotplug we know that pages in one memory block belong to the same numa node, we can skip the checking. We should keep checking for the boot case. [pasha.tatashin@oracle.com: s/register_new_memory()/hotplug_memory_register()] Link: http://lkml.kernel.org/r/20180228030308.1116-6-pasha.tatashin@oracle.com Link: http://lkml.kernel.org/r/20180215165920.8570-6-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin Acked-by: Michal Hocko Reviewed-by: Ingo Molnar Cc: Baoquan He Cc: Bharata B Rao Cc: Daniel Jordan Cc: Dan Williams Cc: Greg Kroah-Hartman Cc: "H. Peter Anvin" Cc: Kirill A. Shutemov Cc: Mel Gorman Cc: Steven Sistare Cc: Thomas Gleixner Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

memory-hotplug: use dev_online for memhp_auto_online

2017-02-25T01:46:56Z

Commit 31bc3858ea3e ("add automatic onlining policy for the newly added memory") provides the capability to have added memory automatically onlined during add, but this appears to be slightly broken. The current implementation uses walk_memory_range() to call online_memory_block, which uses memory_block_change_state() to online the memory. Instead, we should be calling device_online() for the memory block in online_memory_block(). This would online the memory (the memory bus online routine memory_subsys_online() called from device_online calls memory_block_change_state()) and properly update the device struct offline flag. As a result of the current implementation, attempting to remove a memory block after adding it using auto online fails. This is because doing a remove, for instance echo offline > /sys/devices/system/memory/memoryXXX/state uses device_offline() which checks the dev->offline flag. Link: http://lkml.kernel.org/r/20170222220744.8119.19687.stgit@ltcalpine2-lp14.aus.stglabs.ibm.com Signed-off-by: Nathan Fontenot Cc: Michael Ellerman Cc: Michael Roth Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds