user/sven/linux.git/include/linux/mfd/abx500, branch v3.4.92

Merge tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6

2012-03-30T23:09:02Z

Pull battery updates from Anton Vorontsov: "Various small bugfixes and enhancements, plus two new drivers: - A quite complex ab8500 charger driver, submitted by Arun Murthy @ ST-Ericsson; - Summit Microelectronics SMB347 Battery Charger, submitted by Bruce E Robertson and Alan Cox @ Intel. And that's all." * tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits) max17042_battery: Clean up interrupt handling Revert "max8998_charger: Include linux/module.h just once" ab8500_fg: Fix some build warnings on x86_64 max17042_battery: Fix CHARGE_FULL representation. max8998_charger: Include linux/module.h just once power_supply: Convert i2c drivers to module_i2c_driver lp8727_charger: Add MODULE_DEVICE_TABLE charger-manager: Simplify charger_get_property(), get rid of a warning charger-manager: Clean up for better readability da9052-battery: Convert to use module_platform_driver da9052-battery: Fix a memory leak when unload the module da9052-battery: Add missing platform_set_drvdata ab8500: Turn unneeded global symbols into local ones ab8500_fg: Fix copy-paste error ab8500_fg: Get rid of 'struct battery_type' ab8500_fg: Get rid of 'struct v_to_cap' ab8500_btemp: Get rid of 'enum adc_therm' ab8500_charger: Convert to the new USB OTG calls ab8500-btemp: AB8500 battery temperature driver ab8500-fg: A8500 fuel gauge driver ...

Merge tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-03-28T20:56:35Z

Pull MFD changes from Samuel Ortiz: - 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and TI's TPS65090 and TPS65217. - New variants support (8420, 8520 ab9540), cleanups and bug fixes for the abx500 and db8500 ST-E chipsets. - Some minor fixes and update for the wm8994 from Mark. - The beginning of a long term TWL cleanup effort coming from the TI folks. - Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997 drivers. Fix up trivial conflicts due to duplicate patches and header file cleanups ( removal etc). * tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits) gpio/twl: Add DT support to gpio-twl4030 driver gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support mfd: Detach twl6040 from the pmic mfd driver mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups mfd: Micro-optimization on twl4030 IRQ handler mfd: Make twl4030 SIH SPARSE_IRQ capable mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files mfd: Remove references already defineid in header file from twl-core mfd: Remove unneeded header from twl-core mfd: Make twl-core not depend on pdata->irq_base/end ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files mfd: Return twl6030_mmc_card_detect IRQ for board setup Revert "mfd: Add platform data for MAX8997 haptic driver" mfd: Add support for TPS65090 mfd: Add some da9052-i2c section annotations mfd: Build rtc5t583 only if I2C config is selected to y. mfd: Add anatop mfd driver mfd: Fix compilation error in tps65910.h mfd: Add 8420 variant to db8500-prcmu mfd: Add 8520 PRCMU variant to db8500-prcmu ...

ab8500_fg: Get rid of 'struct battery_type'

2012-03-26T16:41:11Z

The struct is duplicated, plus causes the following flood: CC drivers/power/ab8500_fg.o ab8500_fg.c: In function ‘ab8500_fg_get_ext_psy_data’: b8500_fg.c:2081:8: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov

ab8500_fg: Get rid of 'struct v_to_cap'

2012-03-26T16:41:10Z

The struct is duplicated, plus when used it causes the following warnings: CHECK drivers/power/ab8500_fg.c ab8500_fg.c:818:13: warning: incorrect type in assignment (different base types) ab8500_fg.c:818:13: expected struct v_to_cap *tbl ab8500_fg.c:818:13: got struct abx500_v_to_cap *const v_to_cap_tbl CC drivers/power/ab8500_fg.o ab8500_fg.c: In function 'ab8500_fg_volt_to_capacity': ab8500_fg.c:818:6: warning: assignment from incompatible pointer type [enabled by default] Signed-off-by: Anton Vorontsov

ab8500_btemp: Get rid of 'enum adc_therm'

2012-03-26T16:41:09Z

This is the same as abx500_adc_therm, but when the former is used, the following warning flood pops up: drivers/power/ab8500_btemp.c: In function 'ab8500_btemp_batctrl_volt_to_res': ab8500_btemp.c:150:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_curr_source_enable': ab8500_btemp.c:212:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:244:32: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_measure_temp': ab8500_btemp.c:462:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c: In function 'ab8500_btemp_id': ab8500_btemp.c:528:121: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] ab8500_btemp.c:551:25: warning: comparison between 'enum abx500_adc_therm' and 'enum adc_therm' [-Wenum-compare] This patch fixes the issue by switching the driver to use more namespace-friendly enum. Signed-off-by: Anton Vorontsov

ab8500-charger: AB8500 charger driver

2012-03-26T16:41:04Z

This driver is responsible for detecting the ac/usb plugin and also includes function to enable ac/usb charging and re-kick the watchdog. It registers with the power supply class and provides information to the user space. The information include status of ac/usb charger device. This information in turn will be used by the abx500 charging algorithm driver to enable/disable and monitor charging. Signed-off-by: Arun Murthy Acked-by: Linus Walleij Signed-off-by: Anton Vorontsov

abx500-chargalg: Add abx500 charging algorithm

2012-03-26T16:41:02Z

This is a charging algorithm driver for abx500 variants. It is the central entity for battery driver and is responsible for charging and monitoring the battery driver. It is a hardware independant driver and also monitors other abx500 power supply devices. Signed-off-by: Arun Murthy Acked-by: Linus Walleij Signed-off-by: Anton Vorontsov

mfd: Make use of the ab8500 firmware read-modify-write service

2012-03-16T18:45:33Z

This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: Mattias Nilsson Reviewed-by: Mattias Wallin Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz

mfd: Support for the AB8500 AB8505 variant

2012-03-16T18:44:20Z

This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: Bengt Jonsson Signed-off-by: Linus Walleij Signed-off-by: Samuel Ortiz

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker