Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v3.2.65 2012-08-19T17:15:33Z 2012-08-19T17:15:33Z Arnd Bergmann arnd@arndb.de 2012-08-05T14:58:37Z urn:sha1:b992ca0631a957c0d2383b6b3ee473e77d8ea4f2 commit 59ee93a528b94ef4e81a08db252b0326feff171f upstream. The irq_to_gpio function was removed from the pxa platform in linux-3.2, and this driver has been broken since. There is actually no in-tree user of this driver that adds this platform device, but the driver can and does get enabled on some platforms. Without this patch, building ezx_defconfig results in: drivers/mfd/ezx-pcap.c: In function 'pcap_isr_work': drivers/mfd/ezx-pcap.c:205:2: error: implicit declaration of function 'irq_to_gpio' [-Werror=implicit-function-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> 2011-11-23T14:03:52Z Afzal Mohammed afzal@ti.com 2011-11-08T13:24:10Z urn:sha1:780dc9ba4eb682a89be48d5b814feae6722a19e0 Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2011-11-08T10:37:41Z Mark Brown broonie@opensource.wolfsonmicro.com 2011-11-08T10:37:41Z urn:sha1:1dd6c0770d7d4ca477a1a8452ab0161b1150e4ad 2011-11-04T23:24:59Z Mark Brown broonie@opensource.wolfsonmicro.com 2011-08-19T09:05:05Z urn:sha1:19940b3d55c87d8089a8cb0fa8e5a9918a3846bd Occasionally we may see an accessory reported before we have a stable impedance for the accessory. If this happens then reread the status in order to ensure that the handler can take the appropriate action for the status change. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> 2011-11-03T16:40:51Z Linus Torvalds torvalds@linux-foundation.org 2011-11-03T16:40:51Z urn:sha1:a0a4194c943bc64dd7b6e26cccb036cb26b81363 * 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits) mfd: Fix missing abx500 header file updates mfd: Add missing <linux/io.h> include to intel_msic x86, mrst: add platform support for MSIC MFD driver mfd: Expose TurnOnStatus in ab8500 sysfs mfd: Remove support for early drop ab8500 chip mfd: Add support for ab8500 v3.3 mfd: Add ab8500 interrupt disable hook mfd: Convert db8500-prcmu panic() into pr_crit() mfd: Refactor db8500-prcmu request_clock() function mfd: Rename db8500-prcmu init function mfd: Fix db5500-prcmu defines mfd: db8500-prcmu voltage domain consumers additions mfd: db8500-prcmu reset code retrieval mfd: db8500-prcmu tweak for modem wakeup mfd: Add db8500-pcmu watchdog accessor functions for watchdog mfd: hwacc power state db8500-prcmu accessor mfd: Add db8500-prcmu accessors for PLL and SGA clock mfd: Move to the new db500 PRCMU API mfd: Create a common interface for dbx500 PRCMU drivers mfd: Initialize DB8500 PRCMU regs ... Fix up trivial conflicts in arch/arm/mach-imx/mach-mx31moboard.c arch/arm/mach-omap2/board-omap3beagle.c arch/arm/mach-u300/include/mach/irqs.h drivers/mfd/wm831x-spi.c 2011-11-02T16:24:06Z Linus Walleij linus.walleij@stericsson.com 2011-10-30T22:50:36Z urn:sha1:b958f7a7cbdfbf59ba61de7ebb9c59b0ee3a7967 I missed to include a patch adding the new silicon revision define CUT3P3 and remove the retired CUT0 versions of AB8500. Also delete the reference to the retired AB3550 from the header. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 2011-11-01T22:06:20Z Linus Torvalds torvalds@linux-foundation.org 2011-11-01T22:06:20Z urn:sha1:f3c3f0670501fee130f22193369249deea8cc630 * 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits) regulator: Constify constraints name regulator: Fix possible nullpointer dereference in regulator_enable() regulator: gpio-regulator add dependency on GENERIC_GPIO regulator: Add module.h include to gpio-regulator regulator: Add driver for gpio-controlled regulators regulator: remove duplicate REG_CTRL2 defines in tps65023 regulator: Clarify documentation for regulator-regulator supplies regulator: Fix some bitrot in the machine driver documentation regulator: tps65023: Added support for the similiar TPS65020 chip regulator: tps65023: Setting correct core regulator for tps65021 regulator: tps65023: Set missing bit for update core-voltage regulator: tps65023: Fixes i2c configuration issues regulator: Add debugfs file showing the supply map table regulator: tps6586x: add SMx slew rate setting regulator: tps65023: Fixes i2c configuration issues regulator: tps6507x: Remove num_voltages array regulator: max8952: removed unused mutex. regulator: fix regulator/consumer.h kernel-doc warning regulator: Ensure enough enable time for max8649 regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched ... 2011-10-28T21:25:01Z Linus Torvalds torvalds@linux-foundation.org 2011-10-28T21:25:01Z urn:sha1:68d99b2c8efcb6ed3807a55569300c53b5f88be5 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (549 commits) ALSA: hda - Fix ADC input-amp handling for Cx20549 codec ALSA: hda - Keep EAPD turned on for old Conexant chips ALSA: hda/realtek - Fix missing volume controls with ALC260 ASoC: wm8940: Properly set codec->dapm.bias_level ALSA: hda - Fix pin-config for ASUS W90V ALSA: hda - Fix surround/CLFE headphone and speaker pins order ALSA: hda - Fix typo ALSA: Update the sound git tree URL ALSA: HDA: Add new revision for ALC662 ASoC: max98095: Convert codec->hw_write to snd_soc_write ASoC: keep pointer to resource so it can be freed ASoC: sgtl5000: Fix wrong mask in some snd_soc_update_bits calls ASoC: wm8996: Fix wrong mask for setting WM8996_AIF_CLOCKING_2 ASoC: da7210: Add support for line out and DAC ASoC: da7210: Add support for DAPM ALSA: hda/realtek - Fix DAC assignments of multiple speakers ASoC: Use SGTL5000_LINREG_VDDD_MASK instead of hardcoded mask value ASoC: Set sgtl5000->ldo in ldo_regulator_register ASoC: wm8996: Use SND_SOC_DAPM_AIF_OUT for AIF2 Capture ASoC: wm8994: Use SND_SOC_DAPM_AIF_OUT for AIF3 Capture ... 2011-10-25T11:57:45Z Linus Torvalds torvalds@linux-foundation.org 2011-10-25T11:57:45Z urn:sha1:4e7e2a2008f5d8c49791c412849d5b0232d39bb3 * 'for-linus' of git://opensource.wolfsonmicro.com/regmap: (62 commits) mfd: Enable rbtree cache for wm831x devices regmap: Support some block operations on cached devices regmap: Allow caches for devices with no defaults regmap: Ensure rbtree syncs registers set to zero properly regmap: Allow rbtree to cache zero default values regmap: Warn on raw I/O as well as bulk reads that bypass cache regmap: Return a sensible error code if we fail to read the cache regmap: Use bsearch() to search the register defaults regmap: Fix doc comment regmap: Optimize the lookup path to use binary search regmap: Ensure we scream if we enable cache bypass/only at the same time regmap: Implement regcache_cache_bypass helper function regmap: Save/restore the bypass state upon syncing regmap: Lock the sync path, ensure we use the lockless _regmap_write() regmap: Fix apostrophe usage regmap: Make _regmap_write() global regmap: Fix lock used for regcache_cache_only() regmap: Grab the lock in regcache_cache_only() regmap: Modify map->cache_bypass directly regmap: Fix regcache_sync generic implementation ... 2011-10-24T12:09:18Z Mattias Nilsson mattias.i.nilsson@stericsson.com 2011-08-12T08:28:10Z urn:sha1:73180f85f4ffbb66843f8248811b2ade29b22df2 Now that we have a shared API between the DB8500 and DB5500 PRCMU's, switch to using this neutral API instead. We delete the parts of db8500-prcmu.h that is now PRCMU-neutral, and calls will be diverted to respective driver. Common registers are in dbx500-prcmu-regs.h and common accessors and defines in <linux/mfd/dbx500-prcmu.h> This way we get a a lot more abstraction and code reuse. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>