user/sven/linux.git/include/linux/mfd, branch v4.4.148

mfd: 88pm80x: Double shifting bug in suspend/resume

2016-10-16T15:36:14Z

commit 9a6dc644512fd083400a96ac4a035ac154fe6b8d upstream. set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4. Fixes: 70c6cce04066 ('mfd: Support 88pm80x in 80x driver') Signed-off-by: Dan Carpenter Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample

2016-09-24T08:07:38Z

commit 7175cce1c3f1d8c8840d2004f78f96a3904249b5 upstream. Now that open delay and sample delay for each channel is configurable via DT, the default IDLE_TIMEOUT value is not enough as this is calculated based on hardcoded macros. This results in driver returning EBUSY sometimes. Fix this by increasing the timeout value based on maximum value possible to open delay and sample delays for each channel. Fixes: 5dc11e810676e ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters") Signed-off-by: Vignesh R Acked-by: Lee Jones Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper

2016-09-07T06:32:43Z

commit 9798ac6d32c1a32d6d92d853ff507d2d39c4300c upstream. So that callers of cros_ec_cmd_xfer() don't have to repeat boilerplate code when checking for errors from the EC side. Signed-off-by: Tomeu Vizoso Reviewed-by: Benson Leung Signed-off-by: Brian Norris Acked-by: Lee Jones Tested-by: Enric Balletbo i Serra Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

regulator: s2mps11: Fix invalid selector mask and voltages for buck9

2016-05-19T00:06:51Z

commit 3b672623079bb3e5685b8549e514f2dfaa564406 upstream. The buck9 regulator of S2MPS11 PMIC had incorrect vsel_mask (0xff instead of 0x1f) thus reading entire register as buck9's voltage. This effectively caused regulator core to interpret values as higher voltages than they were and then to set real voltage much lower than intended. The buck9 provides power to other regulators, including LDO13 and LDO19 which supply the MMC2 (SD card). On Odroid XU3/XU4 the lower voltage caused SD card detection errors on Odroid XU3/XU4: mmc1: card never left busy state mmc1: error -110 whilst initialising SD card During driver probe the regulator core was checking whether initial voltage matches the constraints. With incorrect vsel_mask of 0xff and default value of 0x50, the core interpreted this as 5 V which is outside of constraints (3-3.775 V). Then the regulator core was adjusting the voltage to match the constraints. With incorrect vsel_mask this new voltage mapped to a vere low voltage in the driver. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

Merge tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform

2015-11-14T05:53:18Z

Pull chrome platform updates from Olof Johansson: "Here's the branch of chrome platform changes for v4.4. Some have been queued up for the full 4.3 release cycle since I forgot to send them in for that round (rebased early on to deal with fixes conflicts). Most of these enable EC communication stuff -- Pixel 2015 support, enabling building for ARM64 platforms, and a few fixes for memory leaks. There's also a patch in here to allow reading/writing the verified boot context, which depends on a sysfs patch acked by Greg" * tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: Fix i2c-designware adapter name platform/chrome: Support reading/writing the vboot context sysfs: Support is_visible() on binary attributes platform/chrome: cros_ec: Fix possible leak in led_rgb_store() platform/chrome: cros_ec: Fix leak in sequence_store() platform/chrome: Enable Chrome platforms on 64-bit ARM platform/chrome: cros_ec_dev - Add a platform device ID table platform/chrome: cros_ec_lpc - Add support for Google Pixel 2 platform/chrome: cros_ec_lpc - Use existing function to check EC result platform/chrome: Make depends on MFD_CROS_EC instead CROS_EC_PROTO Revert "platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM"

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-11-10T22:56:23Z

Pull ARM SoC platform updates from Olof Johansson: "New and/or improved SoC support for this release: Marvell Berlin: - Enable standard DT-based cpufreq - Add CPU hotplug support Freescale: - Ethernet init for i.MX7D - Suspend/resume support for i.MX6UL Allwinner: - Support for R8 chipset (used on NTC's $9 C.H.I.P board) Mediatek: - SMP support for some platforms Uniphier: - L2 support - Cleaned up SMP support, etc. plus a handful of other patches around above functionality, and a few other smaller changes" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits) ARM: uniphier: rework SMP operations to use trampoline code ARM: uniphier: add outer cache support Documentation: EXYNOS: Update bootloader interface on exynos542x ARM: mvebu: add broken-idle option ARM: orion5x: use mac_pton() helper ARM: at91: pm: at91_pm_suspend_in_sram() must be 8-byte aligned ARM: sunxi: Add R8 support ARM: digicolor: select pinctrl/gpio driver arm: berlin: add CPU hotplug support arm: berlin: use non-self-cleared reset register to reset cpu ARM: mediatek: add smp bringup code ARM: mediatek: enable gpt6 on boot up to make arch timer working soc: mediatek: Fix random hang up issue while kernel init soc: ti: qmss: make acc queue support optional in the driver soc: ti: add firmware file name as part of the driver Documentation: dt: soc: Add description for knav qmss driver ARM: S3C64XX: Use PWM lookup table for mach-smartq ARM: S3C64XX: Use PWM lookup table for mach-hmt ARM: S3C64XX: Use PWM lookup table for mach-crag6410 ARM: S3C64XX: Use PWM lookup table for smdk6410 ...

Merge tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2015-11-06T18:23:50Z

Pull MFD updates from Lee Jones: "New Device Support: - Add support for 88pm860; 88pm80x - Add support for 24c08 EEPROM; at24 - Add support for Broxton Whiskey Cove; intel* - Add support for RTS522A; rts5227 - Add support for I2C devices; intel_quark_i2c_gpio New Functionality: - Add microphone support; arizona - Add general purpose switch support; arizona - Add fuel-gauge support; da9150-core - Add shutdown support; sec-core - Add charger support; tps65217 - Add flexible serial communication unit support; atmel-flexcom - Add power button support; axp20x - Add led-flash support; rt5033 Core Frameworks: - Supply a generic macro for defining Regmap IRQs - Rework ACPI child device matching Fix-ups: - Use Regmap to access registers; tps6105x - Use DEFINE_RES_IRQ_NAMED() macro; da9150 - Re-arrange device registration order; intel_quark_i2c_gpio - Allow OF matching; cros_ec_i2c, atmel-hlcdc, hi6421-pmic, max8997, sm501 - Handle deferred probe; twl6040 - Improve accuracy of headphone detect; arizona - Unnecessary MODULE_ALIAS() removal; bcm590xx, rt5033 - Remove unused code; htc-i2cpld, arizona, pcf50633-irq, sec-core - Simplify code; kempld, rts5209, da903x, lm3533, da9052, arizona - Remove #iffery; arizona - DT binding adaptions; many Bug Fixes: - Fix possible NULL pointer dereference; wm831x, tps6105x - Fix 64bit bug; intel_soc_pmic_bxtwc - Fix signedness issue; arizona" * tag 'mfd-for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits) bindings: mfd: s2mps11: Add documentation for s2mps15 PMIC mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children extcon: arizona: Add extcon specific device tree binding document MAINTAINERS: Add binding docs for Cirrus Logic/Wolfson Arizona devices mfd: arizona: Remove bindings covered in new subsystem specific docs mfd: rt5033: Add RT5033 Flash led sub device mfd: lpss: Add Intel Broxton PCI IDs mfd: lpss: Add Broxton ACPI IDs mfd: arizona: Signedness bug in arizona_runtime_suspend() mfd: axp20x: Add a cell for the power button part of the, axp288 PMICs mfd: dt-bindings: Document pulled down WRSTBI pin on S2MPS1X mfd: sec-core: Disable buck voltage reset on watchdog falling edge mfd: sec-core: Dump PMIC revision to find out the HW mfd: arizona: Use correct type ID for device tree config mfd: arizona: Remove use of codec build config #ifdefs mfd: arizona: Simplify adding subdevices mfd: arizona: Downgrade type mismatch messages to dev_warn mfd: arizona: Factor out checking of jack detection state mfd: arizona: Factor out DCVDD isolation control mfd: Make TPS6105X select REGMAP_I2C ...

Merge tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

2015-11-05T21:06:22Z

Pull regulator updates from Mark Brown: "This is quite a quiet release in terms of volume of patches but it includes a couple of really nice core changes - the work Sascha has done in particular is something I've wanted to get done for a long time but just never got round to myself. Highlights include: - Support from Sascha Hauer for setting the voltage of parent supplies based on requests from their children. This is used both to allow set_voltage() to work through a dumb switch and to improve the efficiency of systems where DCDCs are used to supply LDOs by minimising the voltage drop over the LDOs. - Removal of regulator_list by Tomeu Vizoso, meaning we're not duplicating the device list maintained by the driver core. - Support for Wolfson/Cirrus WM8998 and WM1818" * tag 'regulator-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (29 commits) regulator: Use regulator_lock_supply() for get_voltage() too regulator: arizona: Add regulator specific device tree binding document regulator: stw481x: compile on COMPILE_TEST regulator: qcom-smd: Correct set_load() unit regulator: core: Propagate voltage changes to supply regulators regulator: core: Factor out regulator_map_voltage regulator: i.MX anatop: Allow supply regulator regulator: introduce min_dropout_uV regulator: core: create unlocked version of regulator_set_voltage regulator: arizona-ldo1: Fix handling of GPIO 0 regulator: da9053: Update regulator for DA9053 BC silicon support regulator: max77802: Separate sections for nodes and properties regulator: max77802: Add input supply properties to DT binding doc regulator: axp20x: set supply names for AXP22X DC1SW/DC5LDO internally regulator: axp20x: Drop AXP221 DC1SW and DC5LDO regulator supplies from bindings mfd: tps6105x: Use i2c regmap to access registers regulator: act8865: add DT binding for property "active-semi,vsel-high" regulator: act8865: support output voltage by VSET2[] bits regulator: arizona: add support for WM8998 and WM1814 regulator: core: create unlocked version of regulator_list_voltage ...

Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

2015-11-05T20:28:15Z

Pull power supply and reset updates from Sebastian Reichel: - new AXP20X USB Power driver - new Qualcomm SMBB driver - new TPS65217 Charger driver - BQ24257: add BQ24250/BQ24251 support - overhaul bq27x00 battery driver, rename to bq27xxx - misc fixes and cleanups * tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits) power: bq27xxx_battery: Remove unneeded dependency in Kconfig power: bq27xxx_battery: move irq handler to i2c section power: bq27xxx_battery: fix platform probe twl4030_charger: add missing iio dependency power_supply: charger-manager: add missing of_node_put Documentation: power: bq24257: Document exported sysfs entries power: bq24257: Add various device-specific sysfs properties power: bq24257: Allow input current limit sysfs access power: bq24257: Add input DPM voltage threshold setting support power: bq24257: Add over voltage protection setting support power: bq24257: Add SW-based approach for Power Good determination power: bq24257: Allow manual setting of input current limit power: bq24257: Add bit definition for temp sense enable power: bq24257: Add basic support for bq24250/bq24251 dt: power: bq24257-charger: Cover additional devices power: bq24257: Simplify bq24257_power_supply_init() power: bq24257: Use managed power supply register power: bq24257: Streamline input current limit setup power: bq24257: Remove IRQ config through stat-gpios power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health() ...

mfd: sec-core: Disable buck voltage reset on watchdog falling edge

2015-10-30T17:20:37Z

The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to default values of certain bucks on falling edge of Warm Reset Input pin from AP. However on some boards (with S2MPS13) the pin is pulled down so any suspend will effectively trigger the reset of bucks supplying the power to the little and big cores. In the same time when resuming, these bucks must provide voltage greater or equal to voltage before suspend to match the frequency chosen by cpufreq. If voltage (default value of voltage after reset) is lower than one set by cpufreq before suspend, then system will hang during resuming. Signed-off-by: Krzysztof Kozlowski Reported-by: Bartlomiej Zolnierkiewicz Tested-by: Bartlomiej Zolnierkiewicz Signed-off-by: Lee Jones