user/sven/linux.git/include/linux/mfd, branch v5.10.46

regulator: bd70528: Fix off-by-one for buck123 .n_voltages setting

2021-06-23T12:42:47Z

[ Upstream commit 0514582a1a5b4ac1a3fd64792826d392d7ae9ddc ] The valid selectors for bd70528 bucks are 0 ~ 0xf, so the .n_voltages should be 16 (0x10). Use 0x10 to make it consistent with BD70528_LDO_VOLTS. Also remove redundant defines for BD70528_BUCK_VOLTS. Signed-off-by: Axel Lin Acked-by: Matti Vaittinen Link: https://lore.kernel.org/r/20210523071045.2168904-1-axel.lin@ingics.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

regulator: bd71828: Fix .n_voltages settings

2021-06-16T10:01:43Z

commit 4c668630bf8ea90a041fc69c9984486e0f56682d upstream. Current .n_voltages settings do not cover the latest 2 valid selectors, so it fails to set voltage for the hightest voltage support. The latest linear range has step_uV = 0, so it does not matter if we count the .n_voltages to maximum selector + 1 or the first selector of latest linear range + 1. To simplify calculating the n_voltages, let's just set the .n_voltages to maximum selector + 1. Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators") Signed-off-by: Axel Lin Reviewed-by: Matti Vaittinen Link: https://lore.kernel.org/r/20210523071045.2168904-2-axel.lin@ingics.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

mfd: da9063: Support SMBus and I2C mode

2021-05-11T12:47:31Z

[ Upstream commit 586478bfc9f7e16504d6f64cf18bcbdf6fd0cbc9 ] By default the PMIC DA9063 2-wire interface is SMBus compliant. This means the PMIC will automatically reset the interface when the clock signal ceases for more than the SMBus timeout of 35 ms. If the I2C driver / device is not capable of creating atomic I2C transactions, a context change can cause a ceasing of the clock signal. This can happen if for example a real-time thread is scheduled. Then the DA9063 in SMBus mode will reset the 2-wire interface. Subsequently a write message could end up in the wrong register. This could cause unpredictable system behavior. The DA9063 PMIC also supports an I2C compliant mode for the 2-wire interface. This mode does not reset the interface when the clock signal ceases. Thus the problem depicted above does not occur. This patch tests for the bus functionality "I2C_FUNC_I2C". It can reasonably be assumed that the bus cannot obey SMBus timings if this functionality is set. SMBus commands most probably are emulated in this case which is prone to the latency issue described above. This patch enables the I2C bus mode if I2C_FUNC_I2C is set or otherwise keeps the default SMBus mode. Signed-off-by: Hubert Streidl Signed-off-by: Mark Jonas Reviewed-by: Wolfram Sang Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

mfd: intel-m10-bmc: Fix the register access range

2021-05-11T12:47:31Z

[ Upstream commit d9b326b2c3673f939941806146aee38e5c635fd0 ] This patch fixes the max register address of MAX 10 BMC. The range 0x20000000 ~ 0x200000fc are for control registers of the QSPI flash controller, which are not accessible to host. Signed-off-by: Xu Yilun Reviewed-by: Tom Rix Signed-off-by: Lee Jones Signed-off-by: Sasha Levin

regulator: bd718x7, bd71828, Fix dvs voltage levels

2021-03-04T10:38:07Z

[ Upstream commit c294554111a835598b557db789d9ad2379b512a2 ] The ROHM BD718x7 and BD71828 drivers support setting HW state specific voltages from device-tree. This is used also by various in-tree DTS files. These drivers do incorrectly try to compose bit-map using enum values. By a chance this works for first two valid levels having values 1 and 2 - but setting values for the rest of the levels do indicate capability of setting values for first levels as well. Luckily the regulators which support setting values for SUSPEND/LPSR do usually also support setting values for RUN and IDLE too - thus this has not been such a fatal issue. Fix this by defining the old enum values as bits and fixing the parsing code. This allows keeping existing IC specific drivers intact and only slightly changing the rohm-regulator.c Fixes: 21b72156ede8b ("regulator: bd718x7: Split driver to common and bd718x7 specific parts") Signed-off-by: Matti Vaittinen Acked-by: Lee Jones Link: https://lore.kernel.org/r/20210212080023.GA880728@localhost.localdomain Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

Merge tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2020-10-21T18:22:08Z

Pull RTC updates from Alexandre Belloni: "A new driver this cycle is making the bulk of the changes and the rx8010 driver has been rework to use the modern APIs. Summary: Subsystem: - new generic DT properties: aux-voltage-chargeable, trickle-voltage-millivolt New driver: - Microcrystal RV-3032 Drivers: - ds1307: use aux-voltage-chargeable - r9701, rx8010: modernization of the driver - rv3028: fix clock output, trickle resistor values, RAM configuration registers" * tag 'rtc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits) rtc: r9701: set range rtc: r9701: convert to devm_rtc_allocate_device rtc: r9701: stop setting RWKCNT rtc: r9701: remove useless memset rtc: r9701: stop setting a default time rtc: r9701: remove leftover comment rtc: rv3032: Add a driver for Microcrystal RV-3032 dt-bindings: rtc: rv3032: add RV-3032 bindings dt-bindings: rtc: add trickle-voltage-millivolt rtc: rv3028: ensure ram configuration registers are saved rtc: rv3028: factorize EERD bit handling rtc: rv3028: fix trickle resistor values rtc: rv3028: fix clock output support rtc: mt6397: Remove unused member dev rtc: rv8803: simplify the return expression of rv8803_nvram_write rtc: meson: simplify the return expression of meson_vrtc_probe rtc: rx8010: rename rx8010_init_client() to rx8010_init() rtc: ds1307: enable rx8130's backup battery, make it chargeable optionally rtc: ds1307: consider aux-voltage-chargeable rtc: ds1307: store previous charge default per chip ...

Merge tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2020-10-15T16:46:23Z

Pull staging / IIO driver updates from Greg KH: "Here is the large set of staging and IIO driver updates for 5.10-rc1. Included in here are: - new IIO drivers - new IIO driver frameworks - various IIO driver fixes and updates - IIO device tree conversions to yaml - so many minor staging driver coding style cleanups - most cdev driver moved out of staging - no staging drivers added or removed Full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits) staging: comedi: check validity of wMaxPacketSize of usb endpoints found staging: wfx: improve robustness of wfx_get_hw_rate() staging: wfx: drop unicode characters from strings staging: wfx: gpiod_get_value() can return an error staging: wfx: increase robustness of hif_generic_confirm() staging: wfx: wfx_init_common() returns NULL on error staging: wfx: standardize the error when vif does not exist staging: wfx: check memory allocation staging: wfx: improve error handling of hif_join() staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c staging: rtl8188eu: Fix long lines dt-bindings: staging: wfx: silabs,wfx yaml conversion staging: wfx: update copyrights dates staging: wfx: fix QoS priority for slow buses staging: wfx: fix BA sessions for older firmwares staging: wfx: remove remaining code of 'secure link' feature staging: wfx: fix handling of MMIC error staging: vchiq: Fix list_for_each exit tests staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t ...

rtc: mt6397: Remove unused member dev

2020-10-15T10:01:29Z

Removing the struct member "dev" in mt6397 RTC driver because it's not initialized and the only usage is for one debugging message. Also fixed a typo in the error message. Signed-off-by: Fei Shao Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20201008093414.1911699-1-fshao@chromium.org

Merge tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2020-10-14T22:56:58Z

Pull MFD updates from Lee Jones: "New Drivers: - Add support for initialising shared (between children) Regmaps - Add support for Kontron SL28CPLD - Add support for ENE KB3930 Embedded Controller - Add support for Intel FPGA PAC MAX 10 BMC New Device Support: - Add support for Power to Ricoh RN5T618 - Add support for UART to Intel Lakefield - Add support for LP87524_Q1 to Texas Instruments LP87565 New Functionality: - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1 - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x - Use new GPIOD API; dm355evm_msp - Add wake-up capability; sprd-sc27xx-spi - Add ACPI support; kempld-core Fix-ups: - Trivial (spelling/whitespace); Kconfig, ab8500 - Fix for unused variables; khadas-mcu, kempld-core - Remove unused header file(s); mt6360-core - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic - Add COMPILE_TEST support; asic3, tmio_core - Add dependency on I2C; SL28CPLD Bug Fixes: - Fix memory leak(s); sm501 - Do not free regmap_config's 'name' until exit; syscon" * tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits) mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI mfd: sl28cpld: Depend on I2C mfd: asic3: Build if COMPILE_TEST=y dt-bindings: mfd: Correct interrupt flags in examples mfd: Add ACPI support to Kontron PLD driver mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC mfd: lp87565: Add LP87524-Q1 variant dt-bindings: mfd: Add LP87524-Q1 dt-bindings: mfd: lp87565: Convert to yaml mfd: mt6360: Remove unused include mfd: sm501: Fix leaks in probe() mfd: syscon: Don't free allocated name for regmap_config dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings dt-bindings: mfd: ab8500: Remove weird Unicode characters mfd: sprd: Add wakeup capability for PMIC IRQ mfd: intel-lpss: Add device IDs for UART ports for Lakefield mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table mfd: wcd934x: Simplify with dev_err_probe() mfd: stmfx: Simplify with dev_err_probe() ...

mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC

2020-09-30T16:46:21Z

This patch implements the basic functions of the BMC chip for some Intel FPGA PCIe Acceleration Cards (PAC). The BMC is implemented using the Intel MAX 10 CPLD. This BMC chip is connected to the FPGA by a SPI bus. To provide direct register access from the FPGA, the "SPI slave to Avalon Master Bridge" (spi-avmm) IP is integrated in the chip. It converts encoded streams of bytes from the host to the internal register read/write on the Avalon bus. So This driver uses the regmap-spi-avmm for register accessing. Signed-off-by: Xu Yilun Signed-off-by: Wu Hao Signed-off-by: Matthew Gerlach Signed-off-by: Russ Weight Reviewed-by: Tom Rix Signed-off-by: Lee Jones