user/sven/linux.git/include/linux/micrel_phy.h, branch v5.4.250

net: phy: micrel: Update KSZ87xx PHY name

2019-10-17T23:31:52Z

The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut Cc: Andrew Lunn Cc: David S. Miller Cc: Florian Fainelli Cc: George McCollister Cc: Heiner Kallweit Cc: Sean Nyekjaer Cc: Tristram Ha Cc: Woojung Huh Signed-off-by: David S. Miller

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

net: phy: micrel: add Microchip KSZ9131 initial driver

2018-10-20T00:02:23Z

Add support for Microchip Technology KSZ9131 10/100/1000 Ethernet PHY Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller

phy: micrel: add Microchip KSZ 9477 Switch PHY support

2017-06-01T00:56:31Z

Adding Microchip 9477 Phy included in KSZ9477 Switch. Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: Woojung Huh Signed-off-by: David S. Miller

net: phy: micrel: add support for KSZ8795

2017-01-27T16:10:50Z

This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: Sean Nyekjaer Signed-off-by: David S. Miller

net: phy: micrel: Add KSZ8041FTL fiber mode support

2016-07-15T18:53:02Z

We can't detect the FXEN (fiber mode) bootstrap pin, so configure it via a boolean device tree property "micrel,fiber-mode". If it is enabled, auto-negotiation is not supported. The only available modes are 100base-fx (full duplex and half duplex). Signed-off-by: Philipp Zabel Signed-off-by: David S. Miller

net: phy: micrel: add generic clock-mode-select support

2014-11-21T19:08:56Z

Add generic RMII-Reference-Clock-Select support. Several Micrel PHY have an RMII-Reference-Clock-Select bit to select 25 MHz or 50 MHz clock mode. Recently, support for configuring this through device tree for KSZ8021 and KSZ8031 was added. Generalise this support so that it can be configured for other PHY types as well. Note that some PHY revisions (of the same type) has this bit inverted. This should be either configurable through a new device-tree property, or preferably, determined based on PHY ID if possible. Also note that this removes support for setting 25 MHz mode from board files which was also added by the above mentioned commit 45f56cb82e45 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031"). Signed-off-by: Johan Hovold Signed-off-by: David S. Miller

net/phy: micrel: Add clock support for KSZ8021/KSZ8031

2014-10-10T19:35:13Z

The KSZ8021 and KSZ8031 support RMII reference input clocks of 25MHz and 50MHz. Both PHYs differ in the default frequency they expect after reset. If this differs from the actual input clock, then register 0x1f bit 7 must be changed. Signed-off-by: Sascha Hauer Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

micrel: add support for KSZ8041RNLI

2013-12-11T18:54:13Z

Renesas R-Car development boards use KSZ8041RNLI PHY which for some reason has ID of 0x00221537 that is not documented for KSZ8041-family PHYs and does not match the documented ID of 0x0022151x (where 'x' is the revision). We have to add the new #define PHY_ID_* and new ksphy_driver[] entry, almost the same as KSZ8041 one, differing only in the 'phy_id' and 'name' fields. Signed-off-by: Sergei Shtylyov Tested-by: Geert Uytterhoeven Signed-off-by: David S. Miller

phy: micrel: Add definitions for common Micrel PHY registers

2013-08-22T15:20:54Z

Add defines for common Micrel PHY setups so that other platforms can use them. Update imx61 and sama5 hardware to use the micrel_phy.h PHY defines. Also add support for the KSZ9021RLRN PHY. Signed-off-by: Dinh Nguyen Acked-by: Nicolas Ferre Acked-by: David S. Miller CC: Andrew Victor CC: Jean-Christophe Plagniol-Villard Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Shawn Guo