user/sven/linux.git/include/linux/mlx4/driver.h, branch v4.9.188

mlx4: Implement devlink interface

2016-03-01T21:07:29Z

Implement newly introduced devlink interface. Add devlink port instances for every port and set the port types accordingly. Signed-off-by: Jiri Pirko v2->v3: -add dev param to devlink_register (api change) Signed-off-by: David S. Miller

net/mlx4_core: Keep VLAN/MAC tables mirrored in multifunc HA mode

2015-12-07T03:40:45Z

Due to HW limitations, indexes to MAC and VLAN tables are always taken from the table of the actual port. So, if a resource holds an index to a table, it may refer to different values during the lifetime of the resource, unless the tables are mirrored. Also, even when driver is not in HA mode the policy of allocating an index to these tables is such to make sure, as much as possible, that when the time comes the mirroring will be successful. This means that in multifunction mode the allocation of a free index in a port's table tries to make sure that the same index in the other's port table is also free. Signed-off-by: Moni Shoua Reviewed-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Postpone the registration of net_device

2015-08-30T22:12:20Z

The mlx4 network driver was registered in the context of the 'add' function of the core driver (called when HW should be registered). This makes the netdev event NETDEV_REGISTER to be sent in a context where the answer to get_protocol_dev() callback returns NULL. This may be confusing to listeners of netdev events. This patch is a preparation to the patch that implements the get_netdev() callback in the IB/mlx4 driver. Signed-off-by: Moni Shoua Signed-off-by: Doug Ledford

net/mlx4_core: Port aggregation upper layer interface

2015-02-05T00:14:24Z

Supply interface functions to bond and unbond ports of a mlx4 internal interfaces. Example for such an interface is the one registered by the mlx4 IB driver under RoCE. There are 1. Functions to go in/out to/from bonded mode 2. Function to remap virtual ports to physical ports The bond_mutex prevents simultaneous access to data that keep status of the device in bonded mode. The upper mlx4 interface marks to the mlx4 core module that they want to be subject for such bonding by setting the MLX4_INTFF_BONDING flag. Interface which goes to/from bonded mode is re-created. The mlx4 Ethernet driver does not set this flag when registering the interface, the IB driver does. Signed-off-by: Moni Shoua Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Replace mlx4_en_mac_to_u64() with mlx4_mac_to_u64()

2014-03-03T01:04:01Z

Currently, the EN driver uses a private static function mlx4_en_mac_to_u64(). Move it to a common include file (driver.h) for mlx4_en and mlx4_ib for further use. Signed-off-by: Eugenia Emantayev Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

IB/mlx4: Initialize SR-IOV IB support for slaves in master context

2012-10-01T03:33:32Z

Allocate SR-IOV paravirtualization resources and MAD demuxing contexts on the master. This has two parts. The first part is to initialize the structures to contain the contexts. This is done at master startup time in mlx4_ib_init_sriov(). The second part is to actually create the tunneling resources required on the master to support a slave. This is performed the master detects that a slave has started up (MLX4_DEV_EVENT_SLAVE_INIT event generated when a slave initializes its comm channel). For the master, there is no such startup event, so it creates its own tunneling resources when it starts up. In addition, the master also creates the real special QPs. The ib_core layer on the master causes creation of proxy special QPs, since the master is also paravirtualized at the ib_core layer. Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier

Merge tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-07-24T20:56:26Z

Pull InfiniBand/RDMA changes from Roland Dreier: - Updates to the qib low-level driver - First chunk of changes for SR-IOV support for mlx4 IB - RDMA CM support for IPv6-only binding - Other misc cleanups and fixes Fix up some add-add conflicts in include/linux/mlx4/device.h and drivers/net/ethernet/mellanox/mlx4/main.c * tag 'rdma-for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (30 commits) IB/qib: checkpatch fixes IB/qib: Add congestion control agent implementation IB/qib: Reduce sdma_lock contention IB/qib: Fix an incorrect log message IB/qib: Fix QP RCU sparse warnings mlx4: Put physical GID and P_Key table sizes in mlx4_phys_caps struct and paravirtualize them mlx4_core: Allow guests to have IB ports mlx4_core: Implement mechanism for reserved Q_Keys net/mlx4_core: Free ICM table in case of error IB/cm: Destroy idr as part of the module init error flow mlx4_core: Remove double function declarations IB/mlx4: Fill the masked_atomic_cap attribute in query device IB/mthca: Fill in sq_sig_type in query QP IB/mthca: Warning about event for non-existent QPs should show event type IB/qib: Fix sparse RCU warnings in qib_keys.c net/mlx4_core: Initialize IB port capabilities for all slaves mlx4: Use port management change event instead of smp_snoop IB/qib: RCU locking for MR validation IB/qib: Avoid returning EBUSY from MR deregister IB/qib: Fix UC MR refs for immediate operations ...

net/mlx4: Move MAC_MASK to a common place

2012-07-19T15:34:37Z

Define this macro is one common place instead of duplicating it over the code Signed-off-by: Amir Vadai Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

mlx4: Use port management change event instead of smp_snoop

2012-07-10T16:47:10Z

The port management change event can replace smp_snoop. If the capability bit for this event is set in dev-caps, the event is used (by the driver setting the PORT_MNG_CHG_EVENT bit in the async event mask in the MAP_EQ fw command). In this case, when the driver passes incoming SMP PORT_INFO SET mads to the FW, the FW generates port management change events to signal any changes to the driver. If the FW generates these events, smp_snoop shouldn't be invoked in ib_process_mad(), or duplicate events will occur (once from the FW-generated event, and once from smp_snoop). In the case where the FW does not generate port management change events smp_snoop needs to be invoked to create these events. The flow in smp_snoop has been modified to make use of the same procedures as in the fw-generated-event event case to generate the port management events (LID change, Client-rereg, Pkey change, and/or GID change). Port management change event handling required changing the mlx4_ib_event and mlx4_dispatch_event prototypes; the "param" argument (last argument) had to be changed to unsigned long in order to accomodate passing the EQE pointer. We also needed to move the definition of struct mlx4_eqe from net/mlx4.h to file device.h -- to make it available to the IB driver, to handle port management change events. Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker