user/sven/linux.git/include/linux/mlx4, branch v3.18.104

net/mlx4_en: Code cleanups in tx path

2014-10-06T05:04:15Z

- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by: Eric Dumazet Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

net/mlx4_core: New init and exit flow for mlx4_core

2014-09-30T20:27:49Z

In the new flow, we separate the pci initialization and teardown from the initialization and teardown of the other resources. __mlx4_init_one handles the pci resources initialization. It then calls mlx4_load_one to initialize the remainder of the resources. When removing a device, mlx4_remove_one is invoked. However, now mlx4_remove_one calls mlx4_unload_one to free all the resources except the pci resources. When mlx4_unload_one returns, mlx4_remove_one then frees the pci resources. The above separation will allow us to implement 'reset flow' in the future. It will also enable more EQs for VFs and is a pre-step to the modern API to enable/disable SRIOV. Also added nvfs; an integer array of size MLX4_MAX_PORTS + 1; to the mlx4_dev struct. This new field is used to avoid parsing the num_vfs module parameter each time the mlx4_restart_one is called. Signed-off-by: Majd Dibbiny Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-09-23T16:09:27Z

Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller

net/mlx4_core: Enable CQE/EQE stride support

2014-09-19T21:30:10Z

This feature is intended for archs having cache line larger then 64B. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. Until the introduction of this feature, there were two types of CQE/EQE: 1. 32B stride and context in the [0-31] segment 2. 64B stride and context in the [32-63] segment This feature introduces two additional types: 3. 128B stride and context in the [0-31] segment (128B cache line) 4. 256B stride and context in the [0-31] segment (256B cache line) Modify the mlx4_core driver to query the device for the CQE/EQE cache line stride capability and to enable that capability when the host cache line size is larger than 64 bytes (supported cache lines are 128B and 256B). The mlx4 IB driver and libmlx4 need not be aware of this change. The PF context behaviour is changed to require this change in VF drivers running on such archs. Signed-off-by: Ido Shamay Signed-off-by: Jack Morgenstein Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Set vlan stripping policy by the right command

2014-09-10T22:21:34Z

Changing the vlan stripping policy of the QP isn't supported by older firmware versions for the INIT2RTR command. Nevertheless, we've used it. Fix that by doing this policy change using INIT2RTR only if the firmware supports it, otherwise, we call UPDATE_QP command to do the task. Fixes: 7677fc9 ('net/mlx4: Strengthen VLAN tags/priorities enforcement in VST mode') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2014-09-08T04:41:53Z

net/mlx4: Move the tunnel steering helper function to mlx4_core

2014-08-30T03:13:00Z

Move the function which we use to set VXLAN DMFS (flow-steering) rules from mlx4_en to mlx4_core. This refactoring will allow the mlx4_ib driver to call the helper for the use case of user-space RAW Ethernet QPs, such that they can serve VXLAN traffic too. Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller

net/mlx4: Use is_kdump_kernel() to detect kdump kernel

2014-08-25T22:42:19Z

Use is_kdump_kernel() to detect kdump kernel, instead of reset_devices. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2014-08-14T17:09:05Z

Pull infiniband/rdma updates from Roland Dreier: "Main set of InfiniBand/RDMA updates for 3.17 merge window: - MR reregistration support - MAD support for RMPP in userspace - iSER and SRP initiator updates - ocrdma hardware driver updates - other fixes..." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (52 commits) IB/srp: Fix return value check in srp_init_module() RDMA/ocrdma: report asic-id in query device RDMA/ocrdma: Update sli data structure for endianness RDMA/ocrdma: Obtain SL from device structure RDMA/uapi: Include socket.h in rdma_user_cm.h IB/srpt: Handle GID change events IB/mlx5: Use ARRAY_SIZE instead of sizeof/sizeof[0] IB/mlx4: Use ARRAY_SIZE instead of sizeof/sizeof[0] RDMA/amso1100: Check for integer overflow in c2_alloc_cq_buf() IPoIB: Remove unnecessary test for NULL before debugfs_remove() IB/mad: Add user space RMPP support IB/mad: add new ioctl to ABI to support new registration options IB/mad: Add dev_notice messages for various umad/mad registration failures IB/mad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid multicast join attempts with invalid P_key IB/umad: Update module to [pr|dev]_* style print messages IB/ipoib: Avoid flushing the workqueue from worker context IB/ipoib: Use P_Key change event instead of P_Key polling mechanism IB/ipath: Add P_Key change event support mlx4_core: Add support for secure-host and SMP firewall ...

Merge branches 'core', 'cxgb4', 'ipoib', 'iser', 'iwcm', 'mad', 'misc', 'mlx4', 'mlx5', 'ocrdma' and 'srp' into for-next

2014-08-14T15:58:04Z