user/sven/linux.git/include/linux/mlx4, branch v3.3.5

mlx4_en: eth statistics modification

2012-01-22T20:08:43Z

In native mode display all available staticstics. In SRIOV mode on VF display only SW counters statistics, in SRIOV mode on hypervisor display SW counters and errors (got from FW) statistics. Signed-off-by: Eugenia Emantayev Reviewed-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_core: Changing link sensing logic

2011-12-19T19:57:07Z

New FW can give clues to driver regarding default port type and whether or not we should default to link sensing on the port. 2 bits are added to QUERY_PORT command: 1. suggested_type: This bit gives a hint whether the default port type should be IB or Ethernet. The driver will use this hint in case the user didn't specify explicitly the link layer type he wants to set. 2. default_sense: If this bit is set, we would sense the port type on start-up and default the port to link sensing Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4: capability for link sensing

2011-12-19T19:57:06Z

For ConnectX3 devices, we allow link sensing only if FW explicitly reported it supports the feature. For older versions (ConnectX1 and 2), if the card supports both link layer types (Ethenet and Infiniband), link sensing is supported. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet

2011-12-13T18:56:08Z

1. Added module parameters sr_iov and probe_vf for controlling enablement of SRIOV mode. 2. Increased default max num-qps, num-mpts and log_num_macs to accomodate SRIOV mode 3. Added port_type_array as a module parameter to allow driver startup with ports configured as desired. In SRIOV mode, only ETH is supported, and this array is ignored; otherwise, for the case where the FW supports both port types (ETH and IB), the port_type_array parameter is used. By default, the port_type_array is set to configure both ports as IB. 4. When running in sriov mode, the master needs to initialize the ICM eq table to hold the eq's for itself and also for all the slaves. 5. mlx4_set_port_mask() now invoked from mlx4_init_hca, instead of in mlx4_dev_cap. 6. Introduced sriov VF (slave) device startup/teardown logic (mainly procedures mlx4_init_slave, mlx4_slave_exit, mlx4_slave_cap, mlx4_slave_exit and flow modifications in __mlx4_init_one, mlx4_init_hca, and mlx4_setup_hca). VFs obtain their startup information from the PF (master) device via the comm channel. 7. In SRIOV mode (both PF and VF), MSI_X must be enabled, or the driver aborts loading the device. 8. Do not allow setting port type via sysfs when running in SRIOV mode. 9. mlx4_get_ownership: Currently, only one PF is supported by the driver. If the HCA is burned with FW which enables more than one PF, only one of the PFs is allowed to run. The first one up grabs a FW ownership semaphone -- all other PFs will find that semaphore taken, and the driver will not allow them to run. Signed-off-by: Jack Morgenstein Signed-off-by: Yevgeny Petrilin Signed-off-by: Liran Liss Signed-off-by: Marcel Apfelbaum Signed-off-by: David S. Miller

mlx4_core: mtts resources units changed to offset

2011-12-13T18:56:07Z

In the previous implementation mtts are managed by: 1. order - log(mtt segments), 'mtt segment' groups several mtts together. 2. first_seg - segment location relative to mtt table. In the current implementation: 1. order - log(mtts) rather than segments 2. offset - mtt index in mtt table Note: The actual mtt allocation is made in segments but it is transparent to callers. Rational: The mtt resource holders are not interested on how the allocation of mtt is done, but rather on how they will use it. Signed-off-by: Marcel Apfelbaum Reviewed-by: Jack Morgenstein Signed-off-by: David S. Miller

mlx4: Ethernet port management modifications

2011-12-13T18:56:07Z

The physical port is now common to the PF and VFs. The port resources and configuration is managed by the PF, VFs can only influence the MTU of the port, it is set as max among all functions, Each function allocates RX buffers of required size to meet it's MTU enforcement. Port management code was moved to mlx4_core, as the mlx4_en module is virtualization unaware Move handling qp functionality to mlx4_get_eth_qp/mlx4_put_eth_qp including reserve/release range and add/release unicast steering. Let mlx4_register/unregister_mac deal only with MAC (un)registration. Signed-off-by: Eugenia Emantayev Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_core: Reduce number of PD bits to 17

2011-12-13T18:56:05Z

When SRIOV is enabled on the chip (at FW burning time), the HCA uses only 17 bits for the PD. The remaining 7 high-order bits are ignored. Change the allocator to return only 17 bits for the PD. The MSB 7 bits will be used to encode the slave number for consistency checking later on in the resource tracker. Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller

mlx4_core: Add "native" argument to mlx4_cmd and its callers (where needed)

2011-12-13T18:56:05Z

For SRIOV, some Hypervisor commands can be executed directly (native = 1). Others should go through the command wrapper flow (for tracking resource usage, for example, or for changing some HCA configurations that slaves need to be notified of). This patch sets the groundwork for this capability -- adding the correct value of "native" in each case. Note that if SRIOV is not activated, this parameter has no effect. Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller

mlx4: Extanding port_mask functionality

2011-12-13T18:56:05Z

Port mask now has additional state. Port can be set as "none". In this case neither the mlx4_en or mlx4_ib drivers take ownership of the port. In multifunction mode there is an option to set the vfs as single ported devices. (in single function mode, both physical ports belong to same function) Signed-off-by: Jack Morgenstein Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_core: initial header-file changes for SRIOV support

2011-12-13T18:56:05Z

These changes will not affect module operation as yet. They are only to get some structs and enums in place for use by subsequent patches (making those smaller). Added here: * sriov state structs and inlines (mlx4_is_master/slave/mfunc) * comm-channel and vhcr support structures * enum values for new FW and comm-channel virtual commands (i.e., commands, passed via the comm channel to the PF-driver). * prototypes for many command wrapper functions (used by the PF context for processing FW commands passed to it by the VFs). * struct mlx4_eqe is moved from eq.c to mlx4.h (it will be used by other mlx4_core source files). Signed-off-by: Jack Morgenstein Signed-off-by: David S. Miller