user/sven/linux.git/include/linux/mlx4, branch v3.4.67

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-03-21T17:33:42Z

Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier: "Nothing big really stands out; by patch count lots of fixes to the mlx4 driver plus some cleanups and fixes to the core and other drivers." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits) mlx4_core: Scale size of MTT table with system RAM mlx4_core: Allow dynamic MTU configuration for IB ports IB/mlx4: Fix info returned when querying IBoE ports IB/mlx4: Fix possible missed completion event mlx4_core: Report thermal error events mlx4_core: Fix one more static exported function IB: Change CQE "csum_ok" field to a bit flag RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state RDMA/cxgb3: Don't pass irq flags to flush_qp() mlx4_core: Get rid of redundant ext_port_cap flags RDMA/ucma: Fix AB-BA deadlock IB/ehca: Fix ilog2() compile failure IB: Use central enum for speed instead of hard-coded values IB/iser: Post initial receive buffers before sending the final login request IB/iser: Free IB connection resources in the proper place IB/srp: Consolidate repetitive sysfs code IB/srp: Use pr_fmt() and pr_err()/pr_warn() IB/core: Fix SDR rates in sysfs mlx4: Enforce device max FMR maps in FMR alloc IB/mlx4: Set bad_wr for invalid send opcode ...

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

Merge branches 'misc' and 'mlx4' into for-next

2012-03-12T23:25:28Z

Conflicts: drivers/infiniband/hw/mlx4/main.c drivers/net/ethernet/mellanox/mlx4/main.c include/linux/mlx4/device.h

mlx4_core: Allow dynamic MTU configuration for IB ports

2012-03-12T23:24:59Z

Set the MTU for IB ports in the driver instead of using the firmware default of 2KB (the driver defaults to 4KB). Allow for dynamic mtu configuration through a new, per-port sysfs entry. Since there's a dependency between the port MTU and the max number of HW VLs the port can support, apply a mim/max approach, using a loop that goes down from the highest possible number of VLs to the lowest, using the firmware return status to know whether the requested number of VLs is possible with a given MTU. For now, as with the dynamic link type change / VPI support, the sysfs entry to change the mtu is exposed only when NOT running in SR-IOV mode. To allow changing the MTU for the master in SR-IOV mode, primary-function-initiated FLR (Function Level Reset) needs to be implemented. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

mlx4_core: Report thermal error events

2012-03-12T23:24:59Z

Print an error message when a thermal error async event is reported by the HW. Signed-off-by: Jack Morgenstein Signed-off-by: Dotan Barak Signed-off-by: Roland Dreier

mlx4_core: Get rid of redundant ext_port_cap flags

2012-03-07T01:25:18Z

While doing the work for commit a6f7feae6d ("IB/mlx4: pass SMP vendor-specific attribute MADs to firmware") we realized that the firmware would respond on all sorts of vendor-specific MADs. Therefore commit 97285b7817 ("mlx4_core: Add extended port capabilities support") adds redundant code into the driver, since there's no real reaon to maintain the extended capabilities of the port, as they can be queried on demand (e.g the FDR10 capability). This patch reverts commit 97285b7817 and removes the check for extended caps from the mlx4_ib driver port query flow. Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

net/mlx4: fixing sparse warnings for not declared, functions

2012-03-06T20:19:18Z

The SET_PORT functions are implemented in port.c, which is part of mlx4_core, these functions are exported. The functions are in use by the mlx4_en module (were originally part of mlx4_en). Their declaration remained in mlx4_en module, moving the declaration to the right location. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4_en: dont change mac_header on xmit

2012-02-26T19:22:05Z

A driver xmit function is not allowed to change skb without special care. mlx4_en_xmit() should not call skb_reset_mac_header() and instead should use skb->data to access ethernet header. This removes a dumb test : if (ethh && ethh->h_dest) Also remove this slow mlx4_en_mac_to_u64() call, we can use get_unaligned() to get faster code. Signed-off-by: Eric Dumazet Cc: Yevgeny Petrilin Signed-off-by: David S. Miller

mlx4: Enforce device max FMR maps in FMR alloc

2012-02-26T09:43:37Z

ConnectX devices have a limit on the number of mappings that can be done on an FMR before having to call sync_tpt. The current mlx4_ib driver reports the limit correctly in max_map_per_fmr in .query_device(), but mlx4_core doesn't check it when actually allocating FMRs. Add a max_fmr_maps field to struct mlx4_caps and enforce this maximum value on FMR allocations. Signed-off-by: Eli Cohen Signed-off-by: Roland Dreier