user/sven/linux.git/include/linux/mlx4, branch v3.5-rc2

net/mlx4_core: Fix number of EQs used in ICM initialisation

2012-05-31T22:18:16Z

In SRIOV mode, the number of EQs used when computing the total ICM size was incorrect. To fix this, we do the following: 1. We add a new structure to mlx4_dev, mlx4_phys_caps, to contain physical HCA capabilities. The PPF uses the phys capabilities when it computes things like ICM size. The dev_caps structure will then contain the paravirtualized values, making bookkeeping much easier in SRIOV mode. We add a structure rather than a single parameter because there will be other fields in the phys_caps. The first field we add to the mlx4_phys_caps structure is num_phys_eqs. 2. In INIT_HCA, when running in SRIOV mode, the "log_num_eqs" parameter passed to the FW is the number of EQs per VF/PF; each function (PF or VF) has this number of EQs available. However, the total number of EQs which must be allowed for in the ICM is (1 << log_num_eqs) * (#VFs + #PFs). Rather than compute this quantity, we allocate ICM space for 1024 EQs (which is the device maximum number of EQs, and which is the value we place in the mlx4_phys_caps structure). For INIT_HCA, however, we use the per-function number of EQs as described above. Signed-off-by: Marcel Apfelbaum Signed-off-by: Jack Morgenstein Reviewed-by: Or Gerlitz Signed-off-by: David S. Miller

Merge tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-05-22T00:54:55Z

Pull InfiniBand/RDMA changes from Roland Dreier: - Add ocrdma hardware driver for Emulex IB-over-Ethernet adapters - Add generic and mlx4 support for "raw" QPs: allow suitably privileged applications to send and receive arbitrary packets directly to/from the hardware - Add "doorbell drop" handling to the cxgb4 driver - A fairly large batch of qib hardware driver changes - A few fixes for lockdep-detected issues - A few other miscellaneous fixes and cleanups Fix up trivial conflict in drivers/net/ethernet/emulex/benet/be.h. * tag 'rdma-for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (53 commits) RDMA/cxgb4: Include vmalloc.h for vmalloc and vfree IB/mlx4: Fix mlx4_ib_add() error flow IB/core: Fix IB_SA_COMP_MASK macro IB/iser: Fix error flow in iser ep connection establishment IB/mlx4: Increase the number of vectors (EQs) available for ULPs RDMA/cxgb4: Add query_qp support RDMA/cxgb4: Remove kfifo usage RDMA/cxgb4: Use vmalloc() for debugfs QP dump RDMA/cxgb4: DB Drop Recovery for RDMA and LLD queues RDMA/cxgb4: Disable interrupts in c4iw_ev_dispatch() RDMA/cxgb4: Add DB Overflow Avoidance RDMA/cxgb4: Add debugfs RDMA memory stats cxgb4: DB Drop Recovery for RDMA and LLD queues cxgb4: Common platform specific changes for DB Drop Recovery cxgb4: Detect DB FULL events and notify RDMA ULD RDMA/cxgb4: Drop peer_abort when no endpoint found RDMA/cxgb4: Always wake up waiters in c4iw_peer_abort_intr() mlx4_core: Change bitmap allocator to work in round-robin fashion RDMA/nes: Don't call event handler if pointer is NULL RDMA/nes: Fix for the ORD value of the connecting peer ...

mlx4_core: Add second capabilities flags field

2012-05-08T18:54:32Z

This patch adds a 64-bit flags2 features member to struct mlx4_dev to export further features of the hardware. The original flags field tracks features whose support bits are advertised by the firmware in offsets 0x40 and 0x44 of the query device capabilities command. flags2 will track features whose support bits are scattered at various offsets. RSS support is the first feature to be exported through flags2. RSS capabilities are located at offset 0x2e. The size of the RSS indirection table is also given in this offset. Signed-off-by: Shlomo Pongratz Signed-off-by: Roland Dreier

IB/mlx4: Put priority bits in WQE of IBoE MLX QP

2012-05-08T18:48:09Z

Otherwise CM packets going over MLX QP1 get fixed scheduling priority 0. We want CM packets to get the same scheduling priority, and therefore map to the same SQ (Schedule Queue) and eventually TC (Traffic Class), as the application requested for the actual QP used for the connection. Signed-off-by: Oren Duer Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier

net/mlx4_core: set port QoS attributes

2012-04-05T09:08:03Z

Adding QoS firmware commands: - mlx4_en_SET_PORT_PRIO2TC - set UP <=> TC - mlx4_en_SET_PORT_SCHEDULER - set promised BW, max BW and PG number Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

net/mlx4_en: Force user priority by QP attribute

2012-04-05T09:08:03Z

Instead of relying on HW to change schedule queue by UP, schedule queue is fixed for a tx_ring, and UP in WQE is ignored in this aspect. This resolves two issues with untagged traffic: 1. untagged traffic has no UP in packet which is needed for QoS. The change above allows setting the schedule queue (and by that the UP) of such a stream. 2. BlueFlame uses the same field used by vlan tag. So forcing UP from QPC allows using BF for untagged but prioritized traffic. In old firmware that force UP is not supported, untagged traffic will not subject to QoS. Because UP is set by QP, need to always have a tx ring per UP, even if pfcrx module paramter is false. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband

2012-03-21T17:33:42Z

Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier: "Nothing big really stands out; by patch count lots of fixes to the mlx4 driver plus some cleanups and fixes to the core and other drivers." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits) mlx4_core: Scale size of MTT table with system RAM mlx4_core: Allow dynamic MTU configuration for IB ports IB/mlx4: Fix info returned when querying IBoE ports IB/mlx4: Fix possible missed completion event mlx4_core: Report thermal error events mlx4_core: Fix one more static exported function IB: Change CQE "csum_ok" field to a bit flag RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state RDMA/cxgb3: Don't pass irq flags to flush_qp() mlx4_core: Get rid of redundant ext_port_cap flags RDMA/ucma: Fix AB-BA deadlock IB/ehca: Fix ilog2() compile failure IB: Use central enum for speed instead of hard-coded values IB/iser: Post initial receive buffers before sending the final login request IB/iser: Free IB connection resources in the proper place IB/srp: Consolidate repetitive sysfs code IB/srp: Use pr_fmt() and pr_err()/pr_warn() IB/core: Fix SDR rates in sysfs mlx4: Enforce device max FMR maps in FMR alloc IB/mlx4: Set bad_wr for invalid send opcode ...

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

Merge branches 'misc' and 'mlx4' into for-next

2012-03-12T23:25:28Z

Conflicts: drivers/infiniband/hw/mlx4/main.c drivers/net/ethernet/mellanox/mlx4/main.c include/linux/mlx4/device.h