user/sven/linux.git/include/linux/mlx5/device.h, branch stable/5.2.y

Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

2019-05-01T20:57:48Z

This merge commit includes some misc shared code updates from mlx5-next branch needed for net-next. 1) From Aya: Enable general events on all physical link types and restrict general event handling of subtype DELAY_DROP_TIMEOUT in mlx5 rdma driver to ethernet links only as it was intended. 2) From Eli: Introduce low level bits for prio tag mode 3) From Maor: Low level steering updates to support RDMA RX flow steering and enables RoCE loopback traffic when switchdev is enabled. 4) From Vu and Parav: Two small mlx5 core cleanups 5) From Yevgeny add HW definitions of geneve offloads Signed-off-by: Saeed Mahameed

net/mlx5: Geneve, Add flow table capabilities for Geneve decap with TLV options

2019-04-29T23:55:38Z

Introduce specification for Geneve decap flow with encapsulation options and allow creation of rules that are matching on Geneve TLV options. Reviewed-by: Oz Shlomo Signed-off-by: Yevgeny Kliteynik Signed-off-by: Saeed Mahameed

net/mlx5: Add support in RDMA RX steering

2019-04-29T23:55:05Z

Add new flow steering namespace - MLX5_FLOW_NAMESPACE_RDMA_RX. Flow steering rules in this namespace are used to filter RDMA traffic. Signed-off-by: Maor Gottlieb Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed

net/mlx5: Handle event of power detection in the PCIE slot

2019-04-05T21:10:32Z

Handle event of power state change in the PCIE slot. When the event occurs, check if query power state and PCI power fields is supported. If so, read these fields from MPEIN (management PCIE info) register and issue a corresponding message. Signed-off-by: Aya Levin Signed-off-by: Saeed Mahameed

net/mlx5: Add host params change event

2019-02-14T20:14:42Z

In Embedded CPU (EC) configurations, the EC driver needs to know when the number of virtual functions change on the corresponding PF at the host side. This is required so the EC driver can create or destroy representor net devices that represent the VFs ports. Whenever a change in the number of VFs occurs, firmware will generate an event towards the EC which will trigger a work to complete the rest of the handling. The specifics of the handling will be introduced in a downstream patch. Signed-off-by: Bodong Wang Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed

net/mlx5: Introduce Mellanox SmartNIC and modify page management logic

2019-02-14T20:14:41Z

Mellanox's SmartNIC combines embedded CPU(e.g, ARM) processing power with advanced network offloads to accelerate a multitude of security, networking and storage applications. With the introduction of the SmartNIC, there is a new PCI function called Embedded CPU Physical Function(ECPF). And it's possible for a PF to get its ICM pages from the ECPF PCI function. Driver shall identify if it is running on such a function by reading a bit in the initialization segment. When firmware asks for pages, it would issue a page request event specifying how many pages it requests and for which function. That driver responds with a manage_pages command providing the requested pages along with an indication for which function it is providing these pages. The encoding before this patch was as follows: function_id == 0: pages are requested for the function receiving the EQE. function_id != 0: pages are requested for VF identified by the function_id value A new one bit field in the EQE identifies that pages are requested for the ECPF. The notion of page_supplier can be introduced here and to support that, manage pages and query pages were modified so firmware can distinguish the following cases: 1. Function provides pages for itself 2. PF provides pages for its VF 3. ECPF provides pages to itself 4. ECPF provides pages for another function This distinction is possible through the introduction of the bit "embedded_cpu_function" in query_pages, manage_pages and page request EQE. Signed-off-by: Bodong Wang Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed

net/mlx5: Use void pointer as the type in address_of macro

2019-02-14T20:14:41Z

Better to use void * and avoid unnecessary casts. This patch doesn't change any functionality. Signed-off-by: Bodong Wang Signed-off-by: Eli Cohen Reviewed-by: Or Gerlitz Reviewed-by: Daniel Jurgens Signed-off-by: Saeed Mahameed

net/mlx5: Set ODP SRQ support in firmware

2019-02-03T10:49:59Z

To avoid compatibility issue with older kernels the firmware doesn't allow SRQ to work with ODP unless kernel asks for it. Signed-off-by: Moni Shoua Reviewed-by: Majd Dibbiny Signed-off-by: Leon Romanovsky

net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQE

2018-12-21T06:54:19Z

Add support for the HW feature of multi-packet WQE in XDP xmit flow. The conventional TX descriptor (WQE, Work Queue Element) serves a single packet. Our HW has support for multi-packet WQE (MPWQE) in which a single descriptor serves multiple TX packets. This reduces both the PCI overhead and the CPU cycles wasted on writing them. In this patch we add support for the HW feature, which is supported starting from ConnectX-5. Performance: Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs. CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz XDP_TX: We see a huge gain on single port ConnectX-5, and reach the 100 Mpps milestone. * Single-port HCA: Before: 70 Mpps After: 100 Mpps (+42.8%) * Dual-port HCA: Before: 51.7 Mpps After: 57.3 Mpps (+10.8%) * In both cases we tested traffic on one port and for now On Dual-port HCAs we see only small gain, we are working to overcome this bottleneck, but for the moment only with experimental firmware on dual port HCAs we can reach the wanted numbers as seen on Single-port HCAs. XDP_REDIRECT: Redirect from (A) ConnectX-5 to (B) ConnectX-5. Due to a setup limitation, (A) and (B) are on different NUMA nodes, so absolute performance numbers are not optimal. Note: Below is the transmit rate of (B), not the redirect rate of (A) which is in some cases higher. * (B) is single-port: Before: 77 Mpps After: 90 Mpps (+16.8%) * (B) is dual-port: Before: 61 Mpps After: 72 Mpps (+18%) Signed-off-by: Tariq Toukan Signed-off-by: Saeed Mahameed

net/mlx5: Add monitor commands layout and event data

2018-12-10T22:00:08Z

Will be used in downstream patch to monitor counter changes by the HCA and report it to the driver by an event. The driver will update its counters cached data accordingly. Signed-off-by: Eyal Davidovich Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed