user/sven/linux.git/include/linux/mlx5/device.h, branch v4.8.5

net/mlx5e: Check the minimum inline header mode before xmit

2016-07-26T00:53:40Z

Each send queue (SQ) has inline mode that defines the minimal required inline headers in the SQ WQE. Before sending each packet check that the minimum required headers on the WQE are copied. Signed-off-by: Hadar Hen Zion Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5: Rate limit tables support

2016-06-27T08:10:40Z

Configuring and managing HW rate limit tables. The HW holds a table of rate limits, each rate is associated with an index in that table. Later a Send Queue uses this index to set the rate limit. Multiple Send Queues can have the same rate limit, which is represented by a single entry in this table. Even though a rate can be shared, each queue is being rate limited independently of others. The SW shadow of this table holds the rate itself, the index in the HW table and the refcount (number of queues) working with this rate. The exported functions are mlx5_rl_add_rate and mlx5_rl_remove_rate. Number of different rates and their values are derived from HW capabilities. Signed-off-by: Yevgeny Petrilin Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5: Fix flow steering NIC capabilities check

2016-06-10T05:06:25Z

Flow steering infrastructure is currently used only on link layer ethernet, therefore the driver should initialize the flow steering when the device link layer is ethernet. In addition, add missing capability check before initializing the namespace of NIC RX flow tables. Fixes: 2530236303d9 ('net/mlx5_core: Flow steering tree initialization') Signed-off-by: Maor Gottlieb Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly

2016-06-10T05:06:25Z

Having MLX5_CMD_OP_MAX on another file causes us to repeatedly miss accounting new commands added to the driver and hence there're no entries for them in debugfs. To solve that, we integrate it into the commands enum as the last entry. Fixes: 34a40e689393 ('net/mlx5_core: Introduce modify flow table command') Signed-off-by: Shahar Klein Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5e: CQE compression

2016-05-11T23:42:39Z

CQE compression feature is meant to save PCIe bandwidth by compressing few CQEs into smaller amount of bytes on PCIe. CQE compression can be selectively enabled per CQ. By default is disabled for now and will be enabled later on. Signed-off-by: Tariq Toukan Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5: Flow steering, Add vport ACL support

2016-05-04T18:04:46Z

Update the relevant flow steering device structs and commands to support vport. Update the flow steering core API to receive vport number. Add ingress and egress ACL flow table name spaces. Add ACL flow table support: * ACL (Access Control List) flow table is a table that contains only allow/drop steering rules. * We have two types of ACL flow tables - ingress and egress. * ACLs handle traffic sent from/to E-Switch FDB table, Ingress refers to traffic sent from Vport to E-Switch and Egress refers to traffic sent from E-Switch to vport. * Ingress ACL flow table allow/drop rules is checked against traffic sent from VF. * Egress ACL flow table allow/drop rules is checked against traffic sent to VF. Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2016-05-04T04:52:29Z

Conflicts: net/ipv4/ip_gre.c Minor conflicts between tunnel bug fixes in net and ipv6 tunnel cleanups in net-next. Signed-off-by: David S. Miller

IB/mlx5: Expose correct max_sge_rd limit

2016-04-28T14:49:17Z

mlx5 devices (Connect-IB, ConnectX-4, ConnectX-4-LX) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Cc: linux-stable@vger.kernel.org Reported-by: Christoph Hellwig Tested-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford

net/mlx5e: Fix checksum handling for non-stripped vlan packets

2016-04-26T19:58:03Z

Now as rx-vlan offload can be disabled, packets can be received with vlan tag not stripped, which means is_first_ethertype_ip will return false, for that we need to check if the hardware reported csum OK so we will report CHECKSUM_UNNECESSARY for those packets. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller

net/mlx5e: Add link down events counter

2016-04-26T19:58:01Z

Expose link_down_events counter through ethtool -S. This counter is read from PPort statistics, then proccessed and stored as a special handling software counter. This counter is stored along software counters since it is the only PPort counter that it's size is not 64 bits. Signed-off-by: Gal Pressman Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller