user/sven/linux.git/include/linux/mlx5/driver.h, branch v3.18.28

net/mlx5_core: Identify resources by their type

2014-10-03T22:42:32Z

This patch puts a common part as the first field of mlx5_core_qp. This field is used to identify which resource generated an event. This is required since upcoming new resource types such as DC targets are allocated for the same numerical space as regular QPs and may generate the same events. By searching the resource in the same table we can then look at the common field to identify the resource. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

net/mlx5_core: use set/get macros in device caps

2014-10-03T22:42:32Z

Transform device capabilities related commands to use set/get macros to manipulate command mailboxes. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

net/mlx5_core: Use hardware registers description header file

2014-10-03T22:42:31Z

Add an auto generated header file that describes hardware registers along with set of macros that set/get values. The macros do static checks to avoid overflow, handle endianess, and overall provide a clean way to code commands. Currently the header file is small and we will add structs as we make use of the macros. A few commands were removed from the commands enum since they are not supported currently and will be added when support is available. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

net/mlx5_core: Update device capabilities handling

2014-10-03T22:42:31Z

Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2014-08-06T16:38:14Z

Pull networking updates from David Miller: "Highlights: 1) Steady transitioning of the BPF instructure to a generic spot so all kernel subsystems can make use of it, from Alexei Starovoitov. 2) SFC driver supports busy polling, from Alexandre Rames. 3) Take advantage of hash table in UDP multicast delivery, from David Held. 4) Lighten locking, in particular by getting rid of the LRU lists, in inet frag handling. From Florian Westphal. 5) Add support for various RFC6458 control messages in SCTP, from Geir Ola Vaagland. 6) Allow to filter bridge forwarding database dumps by device, from Jamal Hadi Salim. 7) virtio-net also now supports busy polling, from Jason Wang. 8) Some low level optimization tweaks in pktgen from Jesper Dangaard Brouer. 9) Add support for ipv6 address generation modes, so that userland can have some input into the process. From Jiri Pirko. 10) Consolidate common TCP connection request code in ipv4 and ipv6, from Octavian Purdila. 11) New ARP packet logger in netfilter, from Pablo Neira Ayuso. 12) Generic resizable RCU hash table, with intial users in netlink and nftables. From Thomas Graf. 13) Maintain a name assignment type so that userspace can see where a network device name came from (enumerated by kernel, assigned explicitly by userspace, etc.) From Tom Gundersen. 14) Automatic flow label generation on transmit in ipv6, from Tom Herbert. 15) New packet timestamping facilities from Willem de Bruijn, meant to assist in measuring latencies going into/out-of the packet scheduler, latency from TCP data transmission to ACK, etc" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits) cxgb4 : Disable recursive mailbox commands when enabling vi net: reduce USB network driver config options. tg3: Modify tg3_tso_bug() to handle multiple TX rings amd-xgbe: Perform phy connect/disconnect at dev open/stop amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask net: sun4i-emac: fix memory leak on bad packet sctp: fix possible seqlock seadlock in sctp_packet_transmit() Revert "net: phy: Set the driver when registering an MDIO bus device" cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine team: Simplify return path of team_newlink bridge: Update outdated comment on promiscuous mode net-timestamp: ACK timestamp for bytestreams net-timestamp: TCP timestamping net-timestamp: SCHED timestamp on entering packet scheduler net-timestamp: add key to disambiguate concurrent datagrams net-timestamp: move timestamp flags out of sk_flags net-timestamp: extend SCM_TIMESTAMPING ancillary data struct cxgb4i : Move stray CPL definitions to cxgb4 driver tcp: reduce spurious retransmits due to transient SACK reneging qlcnic: Initialize dcbnl_ops before register_netdev ...

mlx5: Adjust events to use unsigned long param instead of void *

2014-07-30T21:00:06Z

In the event flow, we currently pass only a port number in the void *data argument. Rather than pass a pointer to the event handlers, we should use an "unsigned long" parameter, and pass the port number value directly. In the future, if necessary for some events, we can use the unsigned long parameter to pass a pointer. Based on a patch by Eli Cohen Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

mlx5: minor fixes (mainly avoidance of hidden casts)

2014-07-30T21:00:06Z

There were many places where parameters which should be u8/u16 were integer type. Additionally, in 2 places, a check for a non-null pointer was added before dereferencing the pointer (this is actually a bug fix). Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

mlx5: Move pci device handling from mlx5_ib to mlx5_core

2014-07-30T21:00:06Z

In preparation for a new mlx5 device which is VPI (i.e., ports can be either IB or ETH), move the pci device functionality from mlx5_ib to mlx5_core. This involves the following changes: 1. Move mlx5_core_dev struct out of mlx5_ib_dev. mlx5_core_dev is now an independent structure maintained by mlx5_core. mlx5_ib_dev now has a pointer to that struct. This requires changing a lot of places where the core_dev struct was accessed via mlx5_ib_dev (now, this needs to be a pointer dereference). 2. All PCI initializations are now done in mlx5_core. Thus, it is now mlx5_core which does pci_register_device (and not mlx5_ib, as was previously). 3. mlx5_ib now registers itself with mlx5_core as an "interface" driver. This is very similar to the mechanism employed for the mlx4 (ConnectX) driver. Once the HCA is initialized (by mlx5_core), it invokes the interface drivers to do their initializations. 4. There is a new event handler which the core registers: mlx5_core_event(). This event handler invokes the event handlers registered by the interfaces. Based on a patch by Eli Cohen Signed-off-by: Jack Morgenstein Signed-off-by: Eli Cohen Signed-off-by: David S. Miller

net: mlx5: Use ktime_get_ns()

2014-07-23T22:01:43Z

This code is beyond silly: struct timespec ts = ktime_get_ts(); ktime_t ktime = timespec_to_ktime(ts); Further down the code builds the delta of two ktime_t values and converts the result to nanoseconds. Use ktime_get_ns() and replace all the nonsense. Signed-off-by: Thomas Gleixner Cc: Eli Cohen Signed-off-by: John Stultz

mlx5_core: Store MR attributes in mlx5_mr_core during creation and after UMR

2014-05-27T18:53:06Z

The patch stores iova, pd and size during mr creation and after UMRs that modify them. It removes the unused access flags field. Signed-off-by: Haggai Eran Signed-off-by: Roland Dreier