user/sven/linux.git/include/linux/mlx5, branch v4.19.159

net/mlx5: Add command entry handling completion

2020-06-03T06:19:11Z

[ Upstream commit 17d00e839d3b592da9659c1977d45f85b77f986a ] When FW response to commands is very slow and all command entries in use are waiting for completion we can have a race where commands can get timeout before they get out of the queue and handled. Timeout completion on uninitialized command will cause releasing command's buffers before accessing it for initialization and then we will get NULL pointer exception while trying access it. It may also cause releasing buffers of another command since we may have timeout completion before even allocating entry index for this command. Add entry handling completion to avoid this race. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh Signed-off-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads

2020-04-17T08:48:43Z

[ Upstream commit 41e684ef3f37ce6e5eac3fb5b9c7c1853f4b0447 ] Until now the flex parser capability was used in ib_query_device() to indicate tunnel_offloads_caps support for mpls_over_gre/mpls_over_udp. Newer devices and firmware will have configurations with the flexparser but without mpls support. Testing for the flex parser capability was a mistake, the tunnel_stateless capability was intended for detecting mpls and was introduced at the same time as the flex parser capability. Otherwise userspace will be incorrectly informed that a future device supports MPLS when it does not. Link: https://lore.kernel.org/r/20200305123841.196086-1-leon@kernel.org Cc: # 4.17 Fixes: e818e255a58d ("IB/mlx5: Expose MPLS related tunneling offloads") Signed-off-by: Alex Vesker Reviewed-by: Ariel Levkovich Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

net/mlx5: Fix mlx5_ifc_query_lag_out_bits

2020-01-27T13:51:03Z

[ Upstream commit ea77388b02270b0af8dc57f668f311235ea068f0 ] Remove the "reserved_at_40" field to match the device specification. Fixes: 84df61ebc69b ("net/mlx5: Add HW interfaces used by LAG") Signed-off-by: Mark Zhang Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin

net/mlx5: Fix atomic_mode enum values

2019-11-20T17:45:52Z

[ Upstream commit aa7e80b220f3a543eefbe4b7e2c5d2b73e2e2ef7 ] The field atomic_mode is 4 bits wide and therefore can hold values from 0x0 to 0xf. Remove the unnecessary 20 bit shift that made the values be incorrect. While that, remove unused enum values. Fixes: 57cda166bbe0 ("net/mlx5: Add DCT command interface") Signed-off-by: Moni Shoua Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin

net/mlx5e: Prevent encap flow counter update async to user query

2019-08-09T15:52:33Z

[ Upstream commit 90bb769291161cf25a818d69cf608c181654473e ] This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by: Ariel Levkovich Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5: Fix modify_cq_in alignment

2019-08-09T15:52:33Z

[ Upstream commit 7a32f2962c56d9d8a836b4469855caeee8766bd4 ] Fix modify_cq_in alignment to match the device specification. After this fix the 'cq_umem_valid' field will be in the right offset. Cc: # 4.19 Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits") Signed-off-by: Edward Srouji Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman

net/mlx5e: Add a lock on tir list

2019-04-17T06:38:42Z

[ Upstream commit 80a2a9026b24c6bd34b8d58256973e22270bedec ] Refresh tirs is looping over a global list of tirs while netdevs are adding and removing tirs from that list. That is why a lock is required. Fixes: 724b2aa15126 ("net/mlx5e: TIRs management refactoring") Signed-off-by: Yuval Avnery Signed-off-by: Saeed Mahameed Signed-off-by: Sasha Levin

net/mlx5: EQ, Use the right place to store/read IRQ affinity hint

2019-02-12T18:47:01Z

[ Upstream commit 1e86ace4c140fd5a693e266c9b23409358f25381 ] Currently the cpu affinity hint mask for completion EQs is stored and read from the wrong place, since reading and storing is done from the same index, there is no actual issue with that, but internal irq_info for completion EQs stars at MLX5_EQ_VEC_COMP_BASE offset in irq_info array, this patch changes the code to use the correct offset to store and read the IRQ affinity hint. Signed-off-by: Saeed Mahameed Reviewed-by: Leon Romanovsky Reviewed-by: Tariq Toukan Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin

net/mlx5: WQ, fixes for fragmented WQ buffers API

2018-10-11T01:26:16Z

mlx5e netdevice used to calculate fragment edges by a call to mlx5_wq_cyc_get_frag_size(). This calculation did not give the correct indication for queues smaller than a PAGE_SIZE, (broken by default on PowerPC, where PAGE_SIZE == 64KB). Here it is replaced by the correct new calls/API. Since (TX/RX) Work Queues buffers are fragmented, here we introduce changes to the API in core driver, so that it gets a stride index and returns the index of last stride on same fragment, and an additional wrapping function that returns the number of physically contiguous strides that can be written contiguously to the work queue. This obsoletes the following API functions, and their buggy usage in EN driver: * mlx5_wq_cyc_get_frag_size() * mlx5_wq_cyc_ctr2fragix() The new API improves modularity and hides the details of such calculation for mlx5e netdevice and mlx5_ib rdma drivers. New calculation is also more efficient, and improves performance as follows: Packet rate test: pktgen, UDP / IPv4, 64byte, single ring, 8K ring size. Before: 16,477,619 pps After: 17,085,793 pps 3.7% improvement Fixes: 3a2f70331226 ("net/mlx5: Use order-0 allocations for all WQ types") Signed-off-by: Tariq Toukan Reviewed-by: Eran Ben Elisha Signed-off-by: Saeed Mahameed

net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules

2018-10-01T17:58:00Z

If the peer device was already unbound, then do not attempt to modify it's resources, otherwise we will crash on dereferencing non-existing device. Fixes: 5c65c564c962 ("net/mlx5e: Support offloading TC NIC hairpin flows") Signed-off-by: Alaa Hleihel Reviewed-by: Or Gerlitz Signed-off-by: Saeed Mahameed