user/sven/linux.git/include/linux/mlx5, branch v5.8.8

net/mlx5e: Modify uplink state on interface up/down

2020-07-28T19:55:51Z

When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin Reviewed-by: Roi Dayan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5e: Fix port buffers cell size value

2020-07-10T02:27:07Z

Device unit for port buffers size, xoff_threshold and xon_threshold is cells. Fix a bug in driver where cell unit size was hard-coded to 128 bytes. This hard-coded value is buggy, as it is wrong for some hardware versions. Driver to read cell size from SBCAM register and translate bytes to cell units accordingly. In order to fix the bug, this patch exposes SBCAM (Shared buffer capabilities mask) layout and defines. If SBCAM.cap_cell_size is valid, use it for all bytes to cells calculations. If not valid, fallback to 128. Cell size do not change on the fly per device. Instead of issuing SBCAM access reg command every time such translation is needed, cache it in mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz as a param to every function that needs bytes to cells translation. While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to en_dcbnl.c, as it is only used by that file. Fixes: 0696d60853d5 ("net/mlx5e: Receive buffer configuration") Signed-off-by: Eran Ben Elisha Reviewed-by: Huy Nguyen Signed-off-by: Saeed Mahameed

RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake

2020-06-18T12:52:29Z

Missed steps during ECE handshake left userspace application with less options for the ECE handshake. Pass ECE options in the additional transitions. Fixes: 50aec2c3135e ("RDMA/mlx5: Return ECE data after modify QP") Link: https://lore.kernel.org/r/20200616104536.2426384-1-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-06-05T21:05:57Z

Pull rdma updates from Jason Gunthorpe: "A more active cycle than most of the recent past, with a few large, long discussed works this time. The RNBD block driver has been posted for nearly two years now, and flowing through RDMA due to it also introducing a new ULP. The removal of FMR has been a recurring discussion theme for a long time. And the usual smattering of features and bug fixes. Summary: - Various small driver bugs fixes in rxe, mlx5, hfi1, and efa - Continuing driver cleanups in bnxt_re, hns - Big cleanup of mlx5 QP creation flows - More consistent use of src port and flow label when LAG is used and a mlx5 implementation - Additional set of cleanups for IB CM - 'RNBD' network block driver and target. This is a network block RDMA device specific to ionos's cloud environment. It brings strong multipath and resiliency capabilities. - Accelerated IPoIB for HFI1 - QP/WQ/SRQ ioctl migration for uverbs, and support for multiple async fds - Support for exchanging the new IBTA defiend ECE data during RDMA CM exchanges - Removal of the very old and insecure FMR interface from all ULPs and drivers. FRWR should be preferred for at least a decade now" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (247 commits) RDMA/cm: Spurious WARNING triggered in cm_destroy_id() RDMA/mlx5: Return ECE DC support RDMA/mlx5: Don't rely on FW to set zeros in ECE response RDMA/mlx5: Return an error if copy_to_user fails IB/hfi1: Use free_netdev() in hfi1_netdev_free() RDMA/hns: Uninitialized variable in modify_qp_init_to_rtr() RDMA/core: Move and rename trace_cm_id_create() IB/hfi1: Fix hfi1_netdev_rx_init() error handling RDMA: Remove 'max_map_per_fmr' RDMA: Remove 'max_fmr' RDMA/core: Remove FMR device ops RDMA/rdmavt: Remove FMR memory registration RDMA/mthca: Remove FMR support for memory registration RDMA/mlx4: Remove FMR support for memory registration RDMA/i40iw: Remove FMR leftovers RDMA/bnxt_re: Remove FMR leftovers RDMA/mlx5: Remove FMR leftovers RDMA/core: Remove FMR pool API RDMA/rds: Remove FMR support for memory registration RDMA/srp: Remove support for FMR memory registration ...

RDMA/mlx5: Return ECE DC support

2020-06-03T18:45:02Z

The DC QPs are many-to-one QP types that means that first connection will establish ECE options that coming connections should follow. Due to this property, the ECE code was removed between first [1] and second [2] ECE submissions. This patch returns the dropped code, because ECE is a property of a connection and like any other connection users are needed to manage this data. Allow them to set ECE parameter for DC too and avoid need of having compatibility flag for the DC ECE. [1] https://lore.kernel.org/linux-rdma/20200523132243.817936-1-leon@kernel.org/ [2] https://lore.kernel.org/linux-rdma/20200525174401.71152-1-leon@kernel.org/ Link: https://lore.kernel.org/r/20200602125548.172654-4-leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

net/mlx5: IPSec: Fix incorrect type for spi

2020-05-30T04:20:22Z

spi is __be32, fix that. Fixes sparse warning: drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec.c:74:64 warning: incorrect type Signed-off-by: Saeed Mahameed

net/mlx5: cmd: Fix memset with byte count warning

2020-05-30T04:20:21Z

Fix sparse warning: drivers/net/ethernet/mellanox/mlx5/core/cmd.c:1949:15: warning: memset with byte count of 271720 mlx5_cmd_stats array is too big to be held inline in mlx5_cmd. Allocate it separately. Signed-off-by: Saeed Mahameed

Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

2020-05-29T21:38:57Z

net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits net/mlx5: Add support in forward to namespace {IB/net}/mlx5: Simplify don't trap code net/mlx5: Replace zero-length array with flexible-array Signed-off-by: Saeed Mahameed

RDMA/mlx5: Convert modify QP to use MLX5_SET macros

2020-05-27T19:07:49Z

Instead of hand crafted mlx5_qp_context and mlx5_qp_path use common MLX5_SET() macros. Link: https://lore.kernel.org/r/20200526115440.205922-7-leon@kernel.org Reviewed-by: Maor Gottlieb Reviewed-by: Mark Zhang Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

Merge branch 'mellanox/mlx5-next' into rdma.git for/next

2020-05-27T19:01:17Z

From the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Required for dependencies in following patches * branch 'mellanox/mlx5-next': net/mlx5: Add ability to read and write ECE options net/mlx5: Add support for RDMA TX FT headers modifying net/mlx5: Move iseg access helper routines close to mlx5_core driver net/mlx5: Cleanup mlx5_ifc_fte_match_set_misc2_bits Signed-off-by: Jason Gunthorpe