user/sven/linux.git/include/linux/mlx5, branch v5.9.8

RDMA/mlx5: Fix devlink deadlock on net namespace deletion

2020-11-05T10:51:09Z

[ Upstream commit fbdd0049d98d44914fc57d4b91f867f4996c787b ] When a mlx5 core devlink instance is reloaded in different net namespace, its associated IB device is deleted and recreated. Example sequence is: $ ip netns add foo $ devlink dev reload pci/0000:00:08.0 netns foo $ ip netns del foo mlx5 IB device needs to attach and detach the netdevice to it through the netdev notifier chain during load and unload sequence. A below call graph of the unload flow. cleanup_net() down_read(&pernet_ops_rwsem); <- first sem acquired ops_pre_exit_list() pre_exit() devlink_pernet_pre_exit() devlink_reload() mlx5_devlink_reload_down() mlx5_unload_one() [...] mlx5_ib_remove() mlx5_ib_unbind_slave_port() mlx5_remove_netdev_notifier() unregister_netdevice_notifier() down_write(&pernet_ops_rwsem);<- recurrsive lock Hence, when net namespace is deleted, mlx5 reload results in deadlock. When deadlock occurs, devlink mutex is also held. This not only deadlocks the mlx5 device under reload, but all the processes which attempt to access unrelated devlink devices are deadlocked. Hence, fix this by mlx5 ib driver to register for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

net/mlx5: cmdif, Avoid skipping reclaim pages if FW is not accessible

2020-10-02T17:59:55Z

In case of pci is offline reclaim_pages_cmd() will still try to call the FW to release FW pages, cmd_exec() in this case will return a silent success without actually calling the FW. This is wrong and will cause page leaks, what we should do is to detect pci offline or command interface un-available before tying to access the FW and manually release the FW pages in the driver. In this patch we share the code to check for FW command interface availability and we call it in sensitive places e.g. reclaim_pages_cmd(). Alternative fix: 1. Remove MLX5_CMD_OP_MANAGE_PAGES form mlx5_internal_err_ret_value, command success simulation list. 2. Always Release FW pages even if cmd_exec fails in reclaim_pages_cmd(). Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Avoid possible free of command entry while timeout comp handler

2020-10-02T17:59:54Z

Upon command completion timeout, driver simulates a forced command completion. In a rare case where real interrupt for that command arrives simultaneously, it might release the command entry while the forced handler might still access it. Fix that by adding an entry refcount, to track current amount of allowed handlers. Command entry to be released only when this refcount is decremented to zero. Command refcount is always initialized to one. For callback commands, command completion handler is the symmetric flow to decrement it. For non-callback commands, it is wait_func(). Before ringing the doorbell, increment the refcount for the real completion handler. Once the real completion handler is called, it will decrement it. For callback commands, once the delayed work is scheduled, increment the refcount. Upon callback command completion handler, we will try to cancel the timeout callback. In case of success, we need to decrement the callback refcount as it will never run. In addition, gather the entry index free and the entry free into a one flow for all command types release. Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2020-08-06T23:43:36Z

Pull rdma updates from Jason Gunthorpe: "A quiet cycle after the larger 5.8 effort. Substantially cleanup and driver work with a few smaller features this time. - Driver updates for hfi1, rxe, mlx5, hns, qedr, usnic, bnxt_re - Removal of dead or redundant code across the drivers - RAW resource tracker dumps to include a device specific data blob for device objects to aide device debugging - Further advance the IOCTL interface, remove the ability to turn it off. Add QUERY_CONTEXT, QUERY_MR, and QUERY_PD commands - Remove stubs related to devices with no pkey table - A shared CQ scheme to allow multiple ULPs to share the CQ rings of a device to give higher performance - Several more static checker, syzkaller and rare crashers fixed" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (121 commits) RDMA/mlx5: Fix flow destination setting for RDMA TX flow table RDMA/rxe: Remove pkey table RDMA/umem: Add a schedule point in ib_umem_get() RDMA/hns: Fix the unneeded process when getting a general type of CQE error RDMA/hns: Fix error during modify qp RTS2RTS RDMA/hns: Delete unnecessary memset when allocating VF resource RDMA/hns: Remove redundant parameters in set_rc_wqe() RDMA/hns: Remove support for HIP08_A RDMA/hns: Refactor hns_roce_v2_set_hem() RDMA/hns: Remove redundant hardware opcode definitions RDMA/netlink: Remove CAP_NET_RAW check when dump a raw QP RDMA/include: Replace license text with SPDX tags RDMA/rtrs: remove WQ_MEM_RECLAIM for rtrs_wq RDMA/rtrs-clt: add an additional random 8 seconds before reconnecting RDMA/cma: Execute rdma_cm destruction from a handler properly RDMA/cma: Remove unneeded locking for req paths RDMA/cma: Using the standard locking pattern when delivering the removal event RDMA/cma: Simplify DEVICE_REMOVAL for internal_id RDMA/efa: Add EFA 0xefa1 PCI ID RDMA/efa: User/kernel compatibility handshake mechanism ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-08-02T08:02:12Z

Resolved kernel/bpf/btf.c using instructions from merge commit 69138b34a7248d2396ab85c8652e20c0c39beaba Signed-off-by: David S. Miller

net/mlx5e: Modify uplink state on interface up/down

2020-07-28T19:55:51Z

When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin Reviewed-by: Roi Dayan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed

net/mlx5: Hold pages RB tree per VF

2020-07-28T09:37:26Z

Per page request event, FW request to allocated or release pages for a single function. Driver maintains FW pages object per function, so there is no need to hold one global page data-base. Instead, have a page data-base per function, which will improve performance release flow in all cases, especially for "release all pages". As the range of function IDs is large and not sequential, use xarray to store a per function ID page data-base, where the function ID is the key. Upon first allocation of a page to a function ID, create the page data-base per function. This data-base will be released only at pagealloc mechanism cleanup. NIC: ConnectX-4 Lx CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz Test case: 32 VFs, measure release pages on one VF as part of FLR Before: 0.021 Sec After: 0.014 Sec The improvement depends on amount of VFs and memory utilization by them. Time measurements above were taken from idle system. Signed-off-by: Eran Ben Elisha Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed

RDMA/mlx5: Set mkey relaxed ordering by UMR with ConnectX-7

2020-07-27T14:19:00Z

Up to ConnectX-7 UMR is not used when user passes relaxed ordering access flag. ConnectX-7 supports setting relaxed ordering read/write mkey attribute by UMR, indicated by new HCA capabilities. With ConnectX-7 driver uses UMR when user set relaxed ordering access flag, in contrast to previous silicon models. Specifically it includes setting relvant flags of mkey context mask in UMR control segment, and relaxed ordering write and read flags in UMR mkey context segment. Link: https://lore.kernel.org/r/20200716105248.1423452-4-leon@kernel.org Signed-off-by: Meir Lichtinger Reviewed-by: Michael Guralnik Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/mlx5: Use MLX5_SET macro instead of local structure

2020-07-27T14:19:00Z

Use generic mlx5 structure defined in mlx5_ifc.h to represent ConnectX device data structures instead of using structure defined specifically for mlx5_ib module. Link: https://lore.kernel.org/r/20200716105248.1423452-3-leon@kernel.org Signed-off-by: Meir Lichtinger Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/mlx5: ConnectX-7 new capabilities to set relaxed ordering by UMR

2020-07-24T19:28:29Z

Up to ConnectX-7 setting mkey relaxed ordering read/write attributes by UMR is not supported. ConnectX-7 supports this option, which is indicated by two new HCA capabilities - relaxed_ordering_write_umr and relaxed_ordering_read_umr. Signed-off-by: Meir Lichtinger Signed-off-by: Leon Romanovsky