user/sven/linux.git/include/linux/mmc/card.h, branch v4.5.6

mmc: core: Remove MMC_CLKGATE

2015-10-26T15:00:09Z

MMC_CLKGATE was once invented to save power by gating the bus clock at request inactivity. At that time it served its purpose. The modern way to deal with power saving for these scenarios, is by using runtime PM. Nowadays, several host drivers have deployed runtime PM, but for those that haven't and which still cares power saving at request inactivity, it's certainly time to deploy runtime PM as it has been around for several years now. To simplify code to mmc core and thus decrease maintenance efforts, this patch removes all code related to MMC_CLKGATE. Signed-off-by: Ulf Hansson Reviewed-by: Linus Walleij

mmc: block: skip trim for some kingston eMMCs

2015-08-27T12:50:52Z

For some mass production of kingston eMMCs which adopt Phison's firmware will meet an unrecoverable data conrruption occasionally if performing trim due to a firmware bug confirmed by vendor. We found it on Intel-C3230RK platform. So we add fixup of broken trim for it. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson

mmc: core: Optimize case for exactly one erase-group budget

2015-08-17T09:32:39Z

In the (not so unlikely) case that the mmc controller timeout budget is enough for exactly one erase-group, the simplification of allowing one sector has an enormous performance penalty. We optimize this special case by introducing a flag that prohibits erase-group boundary crossing, so that we can allow trimming more than one sector at a time. Signed-off-by: David Jander Signed-off-by: Ulf Hansson

mmc: mmc: Read card's valid driver strength mask

2015-06-01T07:07:13Z

In preparation for supporing drive strength selection for eMMC, read the card's valid driver strengths. Note that though the SD spec uses the term "drive strength", the JEDEC eMMC spec uses the term "driver strength". Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: Record card drive strength

2015-06-01T07:07:13Z

In preparation for adding drive strength support for eMMC, add drive_strength to struct mmc_card to record the card drive strength for UHS-I modes and HS200 / HS400. For eMMC this will be needed when switching between HS200 and HS400. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

Revert "mmc: core: Convert mmc_driver to device_driver"

2015-04-17T09:48:01Z

This reverts commit 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") The reverted commit went too far in simplifing the device driver parts for mmc. Let's restore the old mmc_driver to enable driver core to sooner or later to remove the ->probe(), ->remove() and ->shutdown() callbacks from the struct device_driver. Note that, the old ->suspend|resume() callbacks in the struct mmc_driver don't need to be restored, since the mmc block layer has converted to the modern system PM ops. Fixes: 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") Signed-off-by: Ulf Hansson Acked-by: Jaehoon Chung

mmc: Resolve BKOPS compatability issue

2015-01-29T10:15:12Z

This patch is coming to fix compatibility issue of BKOPS_EN field of EXT_CSD. In eMMC-5.1, BKOPS_EN was changed, and now it has two operational bits: Bit 0 - MANUAL_EN Bit 1 - AUTO_EN In previous eMMC revisions, only Bit 0 was supported. Signed-off-by: Alexey Skidanov Signed-off-by: Ulf Hansson

mmc: core: Report firmware version for eMMC 5.0 devices.

2014-11-10T11:40:36Z

For eMMC 5.0 compliant device, firmware version is stored in ext_csd. Report firmware as a 64bit hexa decimal. Vendor can use hexa or ascii string to report firmware version. Also add FFU related EXT_CSD register and note if the device is FFU capable. Signed-off-by: Gwendal Grignou Signed-off-by: Ulf Hansson

mmc: core: Remove unused mmc_list_to_card() macro

2014-11-10T11:40:34Z

Signed-off-by: Ulf Hansson

mmc: block: Use dev_set|get_drvdata()

2014-11-10T11:40:34Z

In most of the cases mmc_get|set_drvdata() didn't simplify code, which should be the primary reason for such macros. Let's remove them and convert to the common device_driver macros, dev_set|get_drvdata() instead. Signed-off-by: Ulf Hansson