user/sven/linux.git/include/linux/mmc/host.h, branch v3.12.6

mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE

2013-06-27T16:39:22Z

MMC_CAP2_FULL_PWR_CYCLE shall be set by host drivers which are able to do a complete power cycle of the card. In the eMMC case that includes both vcc and vccq. This CAP is providing the protocol layer with important information, needed to take optimized decisions during card initialization and in the suspend/resume sequence. MMC_CAP2_POWEROFF_NOTIFY is replaced by MMC_CAP2_FULL_PWR_CYCLE, since it makes sense to use a wider scope for it. Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: return mmc_of_parse() errors to caller

2013-06-27T14:22:44Z

In addition to just logging errors encountered during DT parsing or allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error. In particular, this is needed if the GPIO allocation may return EPROBE_DEFER. Signed-off-by: Simon Baatz Reviewed-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: core: Restructure and simplify code for mmc sleep|awake

2013-05-26T18:23:17Z

The mmc_card_sleep|awake APIs are not being used since the support is already properly encapsulated within the suspend sequence. Sleep|awake command is also specific for eMMC. We remove the sleep|awake bus_ops, the mmc_card_sleep|awake APIs and move the code into the mmc specific core instead. This also includes the mmc ops function, mmc_sleepawake. All releated functions have then become static and we have got far less code to maintain. Additionally this patch also simplifies the code from mmc_sleepawake, since it is only used to put the card to sleep and not awake. Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: core: Support aggressive power management for (e)MMC/SD

2013-05-26T18:23:17Z

Aggressive power management is suitable when saving power is essential. At request inactivity timeout, aka pm runtime autosuspend timeout, the card will be suspended. Once a new request arrives, the card will be re-initalized and thus the first request will suffer from a latency. This latency is card-specific, experiments has shown in general that SD-cards has quite poor initialization time, around 300ms-1100ms. eMMC is not surprisingly far better but still a couple of hundreds of ms has been observed. Except for the request latency, it is important to know that suspending the card will also prevent the card from executing internal house-keeping operations in idle mode. This could mean degradation in performance. To use this feature make sure the request inactivity timeout is chosen carefully. This has not been done as a part of this patch. Enable this feature by using host cap MMC_CAP_AGGRESSIVE_PM and by setting CONFIG_MMC_UNSAFE_RESUME. Signed-off-by: Ulf Hansson Signed-off-by: Chris Ball

mmc: card: Adding support for sanitize in eMMC 4.5

2013-05-26T18:23:13Z

The sanitize support is added as a user-app ioctl call, and was removed from the block-device request, since its purpose is to be invoked not via File-System but by a user. This feature deletes the unmap memory region of the eMMC card, by writing to a specific register in the EXT_CSD. unmap region is the memory region that was previously deleted (by erase, trim or discard operation). In order to avoid timeout when sanitizing large-scale cards, the timeout for sanitize operation is 240 seconds. Signed-off-by: Yaniv Gardi Signed-off-by: Maya Erez Signed-off-by: Chris Ball

mmc: core: Re-use code for MMC_CAP2_DETECT_ON_ERR in polling mode

2013-05-26T18:23:12Z

Previously the MMC_CAP2_DETECT_ON_ERR was invented for detecting slow card removal. In was never a realy good solution and a proper fix has been merged using gpio debouncing instead. We remove this cap in this patch. Although when using polling card detect mode, the code invented for MMC_CAP2_DETECT_ON_ERR is re-used to complete card removal in an earlier phase. There are no need waiting for the polling timeout to elapse in this case. Signed-off-by: Ulf Hansson Reviewed-by: Kevin Liu Signed-off-by: Chris Ball

Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

2013-05-06T22:41:42Z

Pull LED subsystem updates from Bryan Wu: - move LED trigger drivers into a new directory - lp55xx common driver updates - other led drivers updates and bug fixing * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: leds-asic3: switch to using SIMPLE_DEV_PM_OPS leds: leds-bd2802: add CONFIG_PM_SLEEP to suspend/resume functions leds: lp55xx: configure the clock detection leds: lp55xx: use common clock framework when external clock is used leds: leds-ns2: fix oops at module removal leds: leds-pwm: Defer led_pwm_set() if PWM can sleep leds: lp55xx: fix the sysfs read operation leds: lm355x, lm3642: support camera LED triggers for flash and torch leds: add camera LED triggers leds: trigger: use inline functions instead of macros leds: tca6507: Use of_match_ptr() macro leds: wm8350: Complain if we fail to reenable DCDC leds: renesas: set gpio_request_one() flags param correctly leds: leds-ns2: set devm_gpio_request_one() flags param correctly leds: leds-lt3593: set devm_gpio_request_one() flags param correctly leds: leds-bd2802: remove erroneous __exit annotation leds: atmel-pwm: remove erroneous __exit annotation leds: move LED trigger drivers into new subdirectory leds: add new LP5562 LED driver

mmc: core: fix performance regression initializing MMC host controllers

2013-04-12T18:08:07Z

Commit fa5501890d8974301042e0202d342a6cbe8609f4 introduced a performance regression by adding mmc_power_up() to mmc_start_host(). mmc_power_up() is not necessary to host controller initialization, it is part of card initialization and is performed anyway asynchronously. This patch allows a driver to leave the power up in asynchronous code (as it was before). On my current target platform this reduces driver initialization from: [ 1.313220] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 102008 usecs to this: [ 1.217209] initcall sdhci_acpi_driver_init+0x0/0x12 returned 0 after 8331 usecs Signed-off-by: Adrian Hunter Acked-by: Ulf Hansson Signed-off-by: Chris Ball

leds: trigger: use inline functions instead of macros

2013-04-01T18:04:50Z

Macros are used in case that an inline function doesn't work. Otherwise, use an empty inline function. (a) Case of !CONFIG_LEDS_TRIGGERS Following macros are replaced with inline functions. led_trigger_register_simple() led_trigger_unregister_simple() led_trigger_event() To make inline types, the structure, 'led_trigger' should be defined. This structure has no member at all. (b) Case of !CONFIG_LEDS_TRIGGER_IDE_DISK ledtrig_ide_activity() macro is replaced with an inline function as well. (c) DEFINE_LED_TRIGGER() and DEFINE_LED_TRIGGER_GLOBAL() Struct 'led_trigger' is defined both cases, with CONFIG_LEDS_TRIGGERS and without CONFIG_LEDS_TRIGGERS. Those macros are moved out of CONFIG_LED_TRIGGERS because of no-dependency on CONFIG_LEDS_TRIGGERS. (d) Fix build errors in mmc-core driver After replacing macros with inline functions, following build errors occur. (condition: CONFIG_LEDS_TRIGGERS is not set) drivers/mmc/core/core.c: In function 'mmc_request_done': drivers/mmc/core/core.c:164:25: error: 'struct mmc_host' has no member named 'led' drivers/mmc/core/core.c: In function 'mmc_start_request': drivers/mmc/core/core.c:254:24: error: 'struct mmc_host' has no member named 'led' make[3]: *** [drivers/mmc/core/core.o] Error 1 The reason of these errors is non-existent member variable, 'led'. It is only valid when CONFIG_LEDS_TRIGGERS is set. But now, it can be used without this dependency. To fix build errors, member 'led' is always used without its config option in 'include/linux/mmc/host.h'. Signed-off-by: Milo(Woogyom) Kim Signed-off-by: Bryan Wu

mmc: sdio: bind acpi with sdio function device

2013-03-22T16:26:54Z

ACPI spec 5 defined the _ADR encoding for sdio bus as: High word - slot number (0 based) Low word - function number This patch adds support for binding sdio function device with acpi node, and if successful, involve acpi into its power management. Signed-off-by: Aaron Lu Reviewed-by: Adrian Hunter Signed-off-by: Chris Ball