user/sven/linux.git/include/linux/mmc/host.h, branch v3.4.92

mmc: sdio: avoid spurious calls to interrupt handlers

2012-06-01T07:18:26Z

commit bbbc4c4d8c5face097d695f9bf3a39647ba6b7e7 upstream. Commit 06e8935feb ("optimized SDIO IRQ handling for single irq") introduced some spurious calls to SDIO function interrupt handlers, such as when the SDIO IRQ thread is started, or the safety check performed upon a system resume. Let's add a flag to perform the optimization only when a real interrupt is signaled by the host driver and we know there is no point confirming it. Reported-by: Sujit Reddy Thumma Signed-off-by: Nicolas Pitre Signed-off-by: Chris Ball Signed-off-by: Greg Kroah-Hartman

Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

2012-03-29T03:59:45Z

Pull MMC updates from Chris Ball: Core: * Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices that support Data Tag will provide increased throughput for metadata. * Faster detection of card removal on I/O errors. Drivers: * dw_mmc now supports eMMC Power Off Notify, has PCI support, and implements pre_req and post_req for asynchronous requests. * omap_hsmmc now supports device tree. * esdhc now has power management support. * sdhci-tegra now supports Tegra30 devices. * sdhci-spear now supports hibernation. * tmio_mmc now supports using a GPIO for card detection. * Intel PCH now supports 8-bit bus transfers. * tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits) mmc: sh_mmcif: simplify bitmask macros mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug mmc: sh_mobile_sdhi: add a callback for board specific init code mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function mmc: sh_mobile_sdhi: do not manage PM clocks manually mmc: tmio_mmc: remove unused sdio_irq_enabled flag mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper mmc: tmio: calculate the native hotplug condition only once mmc: simplify mmc_cd_gpio_request() by removing two parameters mmc: sdhci-pci: allow 8-bit bus width for Intel PCH mmc: sdhci: check interrupt flags in ISR again mmc: sdhci-pci: Add MSI support mmc: core: warn when card doesn't support HPI mmc: davinci: Poll status for small size transfers mmc: davinci: Eliminate spurious interrupts mmc: omap_hsmmc: Avoid a regulator voltage change with dt mmc: omap_hsmmc: Convert hsmmc driver to use device tree mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO ...

mmc: core: add high-capacity erase size capability flag

2012-03-27T16:20:07Z

Let drivers specify the use of high-capacity erase size. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: start removing enable / disable API

2012-03-27T16:20:03Z

Most parts of the enable / disable API are no longer used and can be removed. Signed-off-by: Adrian Hunter Tested-by: Venkatraman S Tested-by: Jaehoon Chung Signed-off-by: Chris Ball

mmc: core: Detect card removal on I/O error

2012-03-27T16:19:58Z

To prevent I/O as soon as possible at card removal, a new detect work is re-scheduled without a delay to let a rescan remove the card device as soon as possible. Additionally, MMC_CAP2_DETECT_ON_ERR can now be used to handle "slowly" removed cards that a scheduled detect work did not detect as removed. To prevent further I/O requests for these lingering removed cards, check if card has been removed and then schedule a detect work to properly remove it. Signed-off-by: Ulf Hansson Reviewed-by: Namjae Jeon Acked-by: Linus Walleij Signed-off-by: Chris Ball

Merge tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2012-03-24T17:41:37Z

Pull avoidance patches from Paul Gortmaker: "Nearly every subsystem has some kind of header with a proto like: void foo(struct device *dev); and yet there is no reason for most of these guys to care about the sub fields within the device struct. This allows us to significantly reduce the scope of headers including headers. For this instance, a reduction of about 40% is achieved by replacing the include with the simple fact that the device is some kind of a struct. Unlike the much larger module.h cleanup, this one is simply two commits. One to fix the implicit users, and then one to delete the device.h includes from the linux/include/ dir wherever possible." * tag 'device-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: device.h: audit and cleanup users in main include dir device.h: cleanup users outside of linux/include (C files)

device.h: audit and cleanup users in main include dir

2012-03-16T14:38:24Z

The header includes a lot of stuff, and it in turn gets a lot of use just for the basic "struct device" which appears so often. Clean up the users as follows: 1) For those headers only needing "struct device" as a pointer in fcn args, replace the include with exactly that. 2) For headers not really using anything from device.h, simply delete the include altogether. 3) For headers relying on getting device.h implicitly before being included themselves, now explicitly include device.h 4) For files in which doing #1 or #2 uncovers an implicit dependency on some other header, fix by explicitly adding the required header(s). Any C files that were implicitly relying on device.h to be present have already been dealt with in advance. Total removals from #1 and #2: 51. Total additions coming from #3: 9. Total other implicit dependencies from #4: 7. As of 3.3-rc1, there were 110, so a net removal of 42 gives about a 38% reduction in device.h presence in include/* Signed-off-by: Paul Gortmaker

mmc: core: add the capability for broken voltage

2012-02-14T01:39:01Z

There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: core: Ensure clocks are always enabled before host interaction

2012-02-14T01:38:58Z

Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Acked-by: Per Forlin Signed-off-by: Chris Ball

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

2012-01-14T20:32:16Z

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.