user/sven/linux.git/include/linux/mmc, branch v3.18.28

mmc: sdhci: Add quirk for always getting TC with stop cmd

2014-10-03T12:18:17Z

Add a quirk for a host controller that always sets a Transfer Complete interrupt status for the stop command even when a busy response is not indicated. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: core: restore detect line inversion semantics

2014-10-02T09:51:26Z

commit 98e90de99a0c43bd434da814c882c4332441871e "mmc: host: switch OF parser to use gpio descriptors" switched the semantic behaviour of card detect and read only flags such that the inversion capability flag would only be set if inversion was explicitly specified in the device tree, in the hopes that no-one was using double inversion. It turns out that the XOR:ing between the explicit inversion was indeed in use, so we need to restore the old semantics where both ways of inversion are checked and the end result XOR:ed. Reported-by: Javier Martinez Canillas Tested-by: Javier Martinez Canillas Signed-off-by: Linus Walleij Signed-off-by: Ulf Hansson

mmc: core: Add new power_mode MMC_POWER_UNDEFINED

2014-09-24T09:20:04Z

Add MMC_POWER_UNDEFINED for power_mode in struct mmc_ios and use it as the initial value of host->ios.power_mode. For hosts with MMC_CAP2_NO_PRESCAN_POWERUP, this makes the later mmc_power_off() do real power-off things instead of NOP, and further prevents state messed up in cards that was already initialized (eg. by BIOS of UEFI driver). Signed-off-by: Roger Tseng Signed-off-by: Ulf Hansson

mmc: Consolidate emmc tuning blocks

2014-09-23T07:13:19Z

The same tuning block exists in the dw_mmc h.c and sdhci-msm.c files. Move these into mmc.c so that they can be shared across drivers. Reported-by: Jaehoon Chung Signed-off-by: Stephen Boyd Signed-off-by: Ulf Hansson

mmc: Replace "enhanced_area_en" attribute by "partition_setting_completed"

2014-09-18T22:03:36Z

Replace ext_csd "enhanced_area_en" attribute by "partition_setting_completed". It was used whether or not enhanced user area is defined and without checks of EXT_CSD_PARTITION_SETTING_COMPLETED bit. Signed-off-by: Grégory Soutadé Signed-off-by: Ulf Hansson

mmc: slot-gpio: add gpiod variant to get wp GPIO

2014-09-09T12:25:14Z

This makes it possible to get the write protect (read only) GPIO line from a GPIO descriptor. Written to exactly mirror the card detect function. Acked-by: Alexandre Courbot Signed-off-by: Linus Walleij Signed-off-by: Ulf Hansson

mmc: remove MMC_CAP2_NO_MULTI_READ flags

2014-09-09T12:15:43Z

Now, mmc framework uses multi_io_quirk for I/O HW bug workaround. MMC_CAP2_NO_MULTI_READ flag is no longer needed Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson

mmc: Add .multi_io_quirk callback for multi I/O HW bug

2014-09-09T11:59:25Z

Historically, we have been using MMC_CAP* to handle host HW issues and currently the block layer uses MMC_CAP2_NO_MULTI_READ flag for a multi I/O HW bug workaround. There are a few tweaks needed to make MMC_CAP2_NO_MULTI_READ suite all situations. Therefore let's add an optional host ops callback to enable host drivers to return the number of blocks it allows per request. In a future patch and when host drivers have converted to the new callback, MMC_CAP2_NO_MULTI_READ shall be removed. Signed-off-by: Kuninori Morimoto Signed-off-by: Ulf Hansson

mmc: sdhci: handle busy-end interrupt during command

2014-09-09T11:59:23Z

It is fully legal for a controller to start handling busy-end interrupt before it has signaled that the command has completed. So make sure we do things in the proper order, Or it results that command interrupt is ignored so it can cause unexpected operations. This is founded at some toshiba emmc with the bellow warning. "mmc0: Got command interrupt 0x00000001 even though no command operation was in progress." This issue has been also reported by Youssef TRIKI: It is not specific to Toshiba devices, and happens with eMMC devices as well as SD card which support Auto-CMD12 rather than CMD23. Also, similar patch is submitted by: Gwendal Grignou Changes since v1: Fixed conflict with the next of git.linaro.org/people/ulf.hansson/mmc.git and Tested if issue is fixed again. Signed-off-by: Hankyung Yu Signed-off-by: Chanho Min Tested-by: Youssef TRIKI Signed-off-by: Ulf Hansson

mmc: dw_mmc: Support voltage changes

2014-09-09T11:59:18Z

For UHS cards we need the ability to switch voltages from 3.3V to 1.8V. Add support to the dw_mmc driver to handle this. Note that dw_mmc needs a little bit of extra code since the interface needs a special bit programmed to the CMD register while CMD11 is progressing. This means adding a few extra states to the state machine to track. Signed-off-by: Doug Anderson Signed-off-by: Yuvaraj Kumar C D Signed-off-by: Ulf Hansson