user/sven/linux.git/include/linux/mmc, branch v3.3.5

mmc: dw_mmc: Fix PIO mode with support of highmem

2012-02-14T01:39:05Z

Current PIO mode makes a kernel crash with CONFIG_HIGHMEM. Highmem pages have a NULL from sg_virt(sg). This patch fixes the following problem. Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted (3.0.15-01423-gdbf465f #589) PC is at dw_mci_pull_data32+0x4c/0x9c LR is at dw_mci_read_data_pio+0x54/0x1f0 pc : [] lr : [] psr: 20000193 sp : c0619d48 ip : c0619d70 fp : c0619d6c r10: 00000000 r9 : 00000002 r8 : 00001000 r7 : 00000200 r6 : 00000000 r5 : e1dd3100 r4 : 00000000 r3 : 65622023 r2 : 0000007f r1 : eeb96000 r0 : e1dd3100 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment xkernel Control: 10c5387d Table: 61e2004a DAC: 00000015 Process swapper (pid: 0, stack limit = 0xc06182f0) Stack: (0xc0619d48 to 0xc061a000) 9d40: e1dd3100 e1a4f000 00000000 e1dd3100 e1a4f000 00000200 9d60: c0619da4 c0619d70 c035988c c03587e4 c0619d9c e18158f4 e1dd3100 e1dd3100 9d80: 00000020 00000000 00000000 00000020 c06e8a84 00000000 c0619e04 c0619da8 9da0: c0359b24 c0359844 e18158f4 e1dd3164 e1dd3168 e1dd3150 3d02fc79 e1dd3154 9dc0: e1dd3178 00000000 00000020 00000000 e1dd3150 00000000 c10dd7e8 e1a84900 9de0: c061e7cc 00000000 00000000 0000008d c06e8a84 c061e780 c0619e4c c0619e08 9e00: c00c4738 c0359a34 3d02fc79 00000000 c0619e4c c05a1698 c05a1670 c05a165c 9e20: c04de8b0 c061e780 c061e7cc e1a84900 ffffed68 0000008d c0618000 00000000 9e40: c0619e6c c0619e50 c00c48b4 c00c46c8 c061e780 c00423ac c061e7cc ffffed68 9e60: c0619e8c c0619e70 c00c7358 c00c487c 0000008d ffffee38 c0618000 ffffed68 9e80: c0619ea4 c0619e90 c00c4258 c00c72b0 c00423ac ffffee38 c0619ecc c0619ea8 9ea0: c004241c c00c4234 ffffffff f8810000 0000006d 00000002 00000001 7fffffff 9ec0: c0619f44 c0619ed0 c0048bc0 c00423c4 220ae7a9 00000000 386f0d30 0005d3a4 9ee0: c00423ac c10dd0b8 c06f2cd8 c0618000 c0594778 c003a674 7fffffff c0619f44 9f00: 386f0d30 c0619f18 c00a6f94 c005be3c 80000013 ffffffff 386f0d30 0005d3a4 9f20: 386f0d30 0005d2d1 c10dd0a8 c10dd0b8 c06f2cd8 c0618000 c0619f74 c0619f48 9f40: c0345858 c005be00 c00a2440 c0618000 c0618000 c00410d8 c06c1944 c00410fc 9f60: c0594778 c003a674 c0619f9c c0619f78 c004a7e8 c03457b4 c0618000 c06c18f8 9f80: 00000000 c0039c70 c06c18d4 c003a674 c0619fb4 c0619fa0 c04ceafc c004a714 9fa0: c06287b4 c06c18f8 c0619ff4 c0619fb8 c0008b68 c04cea68 c0008578 00000000 9fc0: 00000000 c003a674 00000000 10c5387d c0628658 c003aa78 c062f1c4 4000406a 9fe0: 413fc090 00000000 00000000 c0619ff8 40008044 c0008858 00000000 00000000 Backtrace: [] (dw_mci_pull_data32+0x0/0x9c) from [] (dw_mci_read_data_pio+0x54/0x1f0) r6:00000200 r5:e1a4f000 r4:e1dd3100 [] (dw_mci_read_data_pio+0x0/0x1f0) from [] (dw_mci_interrupt+0xfc/0x4a4) [] (dw_mci_interrupt+0x0/0x4a4) from [] (handle_irq_event_percpu+0x7c/0x1b4) [] (handle_irq_event_percpu+0x0/0x1b4) from [] (handle_irq_event+0x44/0x64) [] (handle_irq_event+0x0/0x64) from [] (handle_fasteoi_irq+0xb4/0x124) r7:ffffed68 r6:c061e7cc r5:c00423ac r4:c061e780 [] (handle_fasteoi_irq+0x0/0x124) from [] (generic_handle_irq+0x30/0x38) r7:ffffed68 r6:c0618000 r5:ffffee38 r4:0000008d [] (generic_handle_irq+0x0/0x38) from [] (asm_do_IRQ+0x64/0xe0) r5:ffffee38 r4:c00423ac [] (asm_do_IRQ+0x0/0xe0) from [] (__irq_svc+0x80/0x14c) Exception stack(0xc0619ed0 to 0xc0619f18) Signed-off-by: Seungwon Jeon Acked-by: Will Newton Cc: stable Signed-off-by: Chris Ball

mmc: core: Fix PowerOff Notify suspend/resume

2012-02-14T01:39:02Z

Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S Tested-by: Girish K S Reviewed-by: Saugata Das Signed-off-by: Chris Ball

mmc: core: add the capability for broken voltage

2012-02-14T01:39:01Z

There is an understood mismatch between the voltage the host controller is set to and the voltage supplied to the card by a fixed voltage regulator. Teaching the driver to accept the mismatch is overly complicated. Instead just accept the regulator's voltage. This patch adds MMC_CAP2_BROKEN_VOLTAGE. If the voltage didn't satisfy between min_uV and max_uV, try to change the voltage in core.c. When changing the voltage, maybe use regulator_set_voltage(). In regulator_set_voltage(), check the below condition. /* sanity check */ if (!rdev->desc->ops->set_voltage && !rdev->desc->ops->set_voltage_sel) { ret = -EINVAL; goto out; } If some board should use the fixed-regulator, always return -EINVAL. Then, eMMC didn't initialize always. So if use a fixed-regulator, we need to add the MMC_CAP2_BROKEN_VOLTAGE. Signed-off-by: Jaehoon Chung Signed-off-by: Kyungmin Park Acked-by: Adrian Hunter Signed-off-by: Chris Ball

mmc: core: Ensure clocks are always enabled before host interaction

2012-02-14T01:38:58Z

Ensure clocks are always enabled before any interaction with the host controller driver. This makes sure that there is no race between host execution and the core layer turning off clocks in different context with clock gating framework. Signed-off-by: Sujit Reddy Thumma Acked-by: Linus Walleij Acked-by: Per Forlin Signed-off-by: Chris Ball

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

2012-01-14T20:32:16Z

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1 * tag 'for-linus' of git://github.com/rustyrussell/linux: module_param: check that bool parameters really are bool. intelfbdrv.c: bailearly is an int module_param paride/pcd: fix bool verbose module parameter. module_param: make bool parameters really bool (drivers & misc) module_param: make bool parameters really bool (arch) module_param: make bool parameters really bool (core code) kernel/async: remove redundant declaration. printk: fix unnecessary module_param_name. lirc_parallel: fix module parameter description. module_param: avoid bool abuse, add bint for special cases. module_param: check type correctness for module_param_array modpost: use linker section to generate table. modpost: use a table rather than a giant if/else statement. modules: sysfs - export: taint, coresize, initsize kernel/params: replace DEBUGP with pr_debug module: replace DEBUGP with pr_debug module: struct module_ref should contains long fields module: Fix performance regression on modules with large symbol tables module: Add comments describing how the "strmap" logic works Fix up conflicts in scripts/mod/file2alias.c due to the new linker- generated table approach to adding __mod_*_device_table entries. The ARM sa11x0 mcp bus needed to be converted to that too.

module_param: make bool parameters really bool (drivers & misc)

2012-01-12T23:02:20Z

module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab Signed-off-by: Rusty Russell

mmc: host: Adds support for eMMC 4.5 HS200 mode

2012-01-12T20:17:16Z

This patch adds support for the HS200 mode on the host side. Also enables the tuning feature required when the HS200 mode is selected. Signed-off-by: Girish K S Signed-off-by: Chris Ball

mmc: core: HS200 mode support for eMMC 4.5

2012-01-12T20:17:15Z

This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S Signed-off-by: Philip Rakity Signed-off-by: Chris Ball

mmc: core: Add option to prevent eMMC sleep command

2012-01-12T04:58:48Z

Host may now use MMC_CAP2_NO_SLEEP_CMD to disable the use of eMMC sleep/awake command. This option can be used when your platform has a buggy kernel crash dump software, which is supposed to store the dump on the eMMC, but is not able to wake up the eMMC from sleep state. In particular, failures have been seen with u-boot; even if it is fixed there, platforms will be slow to update their bootloader binaries. Signed-off-by: Ulf Hansson Reviewed-by: Hanumath Prasad Reviewed-by: Srinidhi Kasagar Acked-by: Subhash Jadavani Signed-off-by: Chris Ball

mmc: sdhci-pci: remove SDHCI_QUIRK2_OWN_CARD_DETECTION

2012-01-12T04:58:47Z

Even if a driver provides separate card detection, an interrupt is still needed to abort mmc requests that are in progress. SDHCI_QUIRK2_OWN_CARD_DETECTION prevents that, so remove it. Signed-off-by: Adrian Hunter Signed-off-by: Chris Ball