user/sven/linux.git/include/linux/mmc, branch v4.9.287

brcmfmac: Add support for bcm43364 wireless chipset

2018-08-03T05:55:22Z

[ Upstream commit 9c4a121e82634aa000a702c98cd6f05b27d6e186 ] Add support for the BCM43364 chipset via an SDIO interface, as used in e.g. the Murata 1FX module. The BCM43364 uses the same firmware as the BCM43430 (which is already included), the only difference is the omission of Bluetooth. However, the SDIO_ID for the BCM43364 is 02D0:A9A4, giving it a MODALIAS of sdio:c00v02D0dA9A4, which doesn't get recognised and hence doesn't load the brcmfmac module. Adding the 'A9A4' ID in the appropriate place triggers the brcmfmac driver to load, and then correctly use the firmware file 'brcmfmac43430-sdio.bin'. Signed-off-by: Sean Lanigan Acked-by: Ulf Hansson Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: sdio: fix alignment issue in struct sdio_func

2017-10-08T08:26:08Z

[ Upstream commit 5ef1ecf060f28ecef313b5723f1fd39bf5a35f56 ] Certain 64-bit systems (e.g. Amlogic Meson GX) require buffers to be used for DMA to be 8-byte-aligned. struct sdio_func has an embedded small DMA buffer not meeting this requirement. When testing switching to descriptor chain mode in meson-gx driver SDIO is broken therefore. Fix this by allocating the small DMA buffer separately as kmalloc ensures that the returned memory area is properly aligned for every basic data type. Signed-off-by: Heiner Kallweit Tested-by: Helmut Klein Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Merge tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc

2016-10-05T18:34:53Z

Pull MMC updates from Ulf Hansson: MMC core: - Add support for sending commands during data transfer - Erase/discard/trim improvements - Improved error handling - Extend sysfs with SD status register - Document info about the vmmc/vmmcq regulators - Extend pwrseq-simple to manage an optional post-power-on-delay - Some various minor improvements and cleanups MMC host: - dw_mmc: Add reset support - dw_mmc: Return -EILSEQ for EBE and SBE error - dw_mmc: Some cleanups - dw_mmc-k3: Add UHS-I support Hisilicon Hikey - tmio: Add eMMC support - sh_mobile_sdhi: Add r8a7796 support - sunxi: Don't use sample clocks for sun4i/sun5i - sunxi: Add support for A64 mmc controller - sunxi: Some cleanups and improvements - sdhci: Support for sending commands during data transfer - sdhci: Do not allow tuning procedure to be interrupted - sdhci-pci: Enable SD/SDIO on Merrifield - sdhci-pci|acpi: Enable MMC_CAP_CMD_DURING_TFR - sdhci-pci: Some cleanups - sdhci-of-arasan: Set controller to test mode when no CD bit - sdhci-of-arasan: Some fixes for clocks and phys - sdhci-brcmstb: Don't use ADMA 64-bit when not supported - sdhci-tegra: Mark 64-bit DMA broken on Tegra124 - sdhci-esdhc-imx: Fixups related to data timeouts * tag 'mmc-v4.9' of git://git.linaro.org/people/ulf.hansson/mmc: (68 commits) mmc: dw_mmc: remove the deprecated "supports-highspeed" property mmc: dw_mmc: minor cleanup for dw_mci_adjust_fifoth mmc: dw_mmc: use macro to define ring buffer size mmc: dw_mmc: fix misleading error print if failing to do DMA transfer mmc: dw_mmc: avoid race condition of cpu and IDMAC mmc: dw_mmc: split out preparation of desc for IDMAC32 and IDMAC64 mmc: core: don't try to switch block size for dual rate mode mmc: sdhci-of-arasan: Set controller to test mode when no CD bit dt: sdhci-of-arasan: Add device tree option xlnx, fails-without-test-cd mmc: tmio: add eMMC support mmc: rtsx_usb: use new macro for R1 without CRC mmc: rtsx_pci: use new macro for R1 without CRC mmc: add define for R1 response without CRC mmc: card: do away with indirection pointer mmc: sdhci-acpi: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci-pci: Set MMC_CAP_CMD_DURING_TFR for Intel eMMC controllers mmc: sdhci: Support cap_cmd_during_tfr requests mmc: mmc_test: Add tests for sending commands during transfer mmc: core: Add support for sending commands during data transfer mmc: sdhci-brcmstb: Fix incorrect capability ...

mmc: add define for R1 response without CRC

2016-09-26T19:31:31Z

The core uses it for polling. Give drivers a proper define handle this case like for other response types. Signed-off-by: Wolfram Sang Signed-off-by: Ulf Hansson

mmc: core: Add support for sending commands during data transfer

2016-09-26T19:31:28Z

A host controller driver exposes its capability using caps flag MMC_CAP_CMD_DURING_TFR. A driver with that capability can accept requests that are marked mrq->cap_cmd_during_tfr = true. Then the driver informs the upper layers when the command line is available for further commands by calling mmc_command_done(). Because of that, the driver will not then automatically send STOP commands, and it is the responsibility of the upper layer to send a STOP command if it is required. For requests submitted through the mmc_wait_for_req() interface, the caller sets mrq->cap_cmd_during_tfr = true which causes mmc_wait_for_req() in fact not to wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete by calling mmc_wait_for_req_done() which is now exported. For requests submitted through the mmc_start_req() interface, the caller again sets mrq->cap_cmd_during_tfr = true, but mmc_start_req() anyway does not wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete in the normal way i.e. calling mmc_start_req() again. Irrespective of how a cap_cmd_during_tfr request is started, mmc_is_req_done() can be called if the upper layer needs to determine if the request is done. However the appropriate waiting function (either mmc_wait_for_req_done() or mmc_start_req()) must still be called. The implementation consists primarily of a new completion mrq->cmd_completion which notifies when the command line is available for further commands. That completion is completed by mmc_command_done(). When there is an ongoing data transfer, calls to mmc_wait_for_req() will automatically wait on that completion, so the caller does not have to do anything special. Note, in the case of errors, the driver may call mmc_request_done() without calling mmc_command_done() because mmc_request_done() always calls mmc_command_done(). Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson

mmc: dw_mmc: add reset support to dwmmc host controller

2016-09-26T19:31:19Z

Dwmmc host controller may in unknown state when entering kernel boot. One example is when booting from eMMC, bootloader need initialize MMC host controller into some state so it can read. In order to make sure MMC host controller in a clean initial state, this reset support is added. With this patch, a 'resets' property can be added into dw_mmc device tree node. The hardware logic is: dwmmc host controller IP receives a reset signal from a 'reset provider' (eg. power management unit). The 'resets' property points to this reset signal. So, during dwmmc driver probe, it can use this signal to reset itself. Refer to [1] for more information. [1] Documentation/devicetree/bindings/reset/reset.txt Signed-off-by: Guodong Xu Signed-off-by: Xinwei Kong Signed-off-by: Zhangfei Gao Reviewed-by: Shawn Lin Signed-off-by: Jaehoon Chung Signed-off-by: Ulf Hansson

mmc: sd: Export SD Status via “ssr” device attribute

2016-09-26T19:31:09Z

The SD Status register contains several important fields related to the SD Card proprietary features. Those fields may be used by user space applications for vendor specific usage. None of those fields are exported today by the driver to user space. In this patch, we are reading the SD Status register and exporting (using MMC_DEV_ATTR) the SD Status register to the user space. Signed-off-by: Uri Yanai Signed-off-by: Ulf Hansson

brcmfmac: add support for bcm4339 chip with modalias sdio:c00v02D0d4339

2016-09-09T09:12:14Z

The driver already supports the bcm4339 chipset but only for the variant that shares the same modalias as the bcm4335, ie. sdio:c00v02D0d4335. It turns out that there are also bcm4339 devices out there that have a more distiguishable modalias sdio:c00v02D0d4339. Reported-by: Steve deRosier Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo

mmc: core: Allow hosts to specify non-support for MMC commands

2016-07-25T08:34:47Z

Host drivers which needs to valdiate for non-supported MMC commands and returnn error code for such requests. To improve and simplify the behaviour, let's invent MMC_CAP2_NO_MMC which these host drivers can set to tell the mmc core to skip sending MMC commands during card initialization. Signed-off-by: Shawn Lin Signed-off-by: Ulf Hansson

mmc: dw_mmc: remove the quirks flags

2016-07-25T08:34:29Z

Remove the quirks flag. (DW_MCI_QUIRK_BROKEN_DTO) For removing this, enabled the dto_timer by defaults. It doesn't see any I/O performance degression. In future, dwmmc controller should not use the quirks flag. Signed-off-by: Jaehoon Chung Reviewed-by: Shawn Lin Signed-off-by: Ulf Hansson