user/sven/linux.git/include/linux/mmc, branch v5.15.76

mmc: core: Add SD card quirk for broken discard

2022-10-29T08:12:58Z

commit 07d2872bf4c864eb83d034263c155746a2fb7a3b upstream. Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2021-08-31T23:43:06Z

Pull networking updates from Jakub Kicinski: "Core: - Enable memcg accounting for various networking objects. BPF: - Introduce bpf timers. - Add perf link and opaque bpf_cookie which the program can read out again, to be used in libbpf-based USDT library. - Add bpf_task_pt_regs() helper to access user space pt_regs in kprobes, to help user space stack unwinding. - Add support for UNIX sockets for BPF sockmap. - Extend BPF iterator support for UNIX domain sockets. - Allow BPF TCP congestion control progs and bpf iterators to call bpf_setsockopt(), e.g. to switch to another congestion control algorithm. Protocols: - Support IOAM Pre-allocated Trace with IPv6. - Support Management Component Transport Protocol. - bridge: multicast: add vlan support. - netfilter: add hooks for the SRv6 lightweight tunnel driver. - tcp: - enable mid-stream window clamping (by user space or BPF) - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD - more accurate DSACK processing for RACK-TLP - mptcp: - add full mesh path manager option - add partial support for MP_FAIL - improve use of backup subflows - optimize option processing - af_unix: add OOB notification support. - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the router. - mac80211: Target Wake Time support in AP mode. - can: j1939: extend UAPI to notify about RX status. Driver APIs: - Add page frag support in page pool API. - Many improvements to the DSA (distributed switch) APIs. - ethtool: extend IRQ coalesce uAPI with timer reset modes. - devlink: control which auxiliary devices are created. - Support CAN PHYs via the generic PHY subsystem. - Proper cross-chip support for tag_8021q. - Allow TX forwarding for the software bridge data path to be offloaded to capable devices. Drivers: - veth: more flexible channels number configuration. - openvswitch: introduce per-cpu upcall dispatch. - Add internet mix (IMIX) mode to pktgen. - Transparently handle XDP operations in the bonding driver. - Add LiteETH network driver. - Renesas (ravb): - support Gigabit Ethernet IP - NXP Ethernet switch (sja1105): - fast aging support - support for "H" switch topologies - traffic termination for ports under VLAN-aware bridge - Intel 1G Ethernet - support getcrosststamp() with PCIe PTM (Precision Time Measurement) for better time sync - support Credit-Based Shaper (CBS) offload, enabling HW traffic prioritization and bandwidth reservation - Broadcom Ethernet (bnxt) - support pulse-per-second output - support larger Rx rings - Mellanox Ethernet (mlx5) - support ethtool RSS contexts and MQPRIO channel mode - support LAG offload with bridging - support devlink rate limit API - support packet sampling on tunnels - Huawei Ethernet (hns3): - basic devlink support - add extended IRQ coalescing support - report extended link state - Netronome Ethernet (nfp): - add conntrack offload support - Broadcom WiFi (brcmfmac): - add WPA3 Personal with FT to supported cipher suites - support 43752 SDIO device - Intel WiFi (iwlwifi): - support scanning hidden 6GHz networks - support for a new hardware family (Bz) - Xen pv driver: - harden netfront against malicious backends - Qualcomm mobile - ipa: refactor power management and enable automatic suspend - mhi: move MBIM to WWAN subsystem interfaces Refactor: - Ambient BPF run context and cgroup storage cleanup. - Compat rework for ndo_ioctl. Old code removal: - prism54 remove the obsoleted driver, deprecated by the p54 driver. - wan: remove sbni/granch driver" * tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits) net: Add depends on OF_NET for LiteX's LiteETH ipv6: seg6: remove duplicated include net: hns3: remove unnecessary spaces net: hns3: add some required spaces net: hns3: clean up a type mismatch warning net: hns3: refine function hns3_set_default_feature() ipv6: remove duplicated 'net/lwtunnel.h' include net: w5100: check return value after calling platform_get_resource() net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx() net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource() net: mdio-ipq4019: Make use of devm_platform_ioremap_resource() fou: remove sparse errors ipv4: fix endianness issue in inet_rtm_getroute_build_skb() octeontx2-af: Set proper errorcode for IPv4 checksum errors octeontx2-af: Fix static code analyzer reported issues octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg octeontx2-af: Fix loop in free and unmap counter af_unix: fix potential NULL deref in unix_dgram_connect() dpaa2-eth: Replace strlcpy with strscpy octeontx2-af: Use NDC TX for transmit packet data ...

Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2021-08-31T21:31:10Z

Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...

mmc: block: Support alternative_gpt_sector() operation

2021-08-24T16:09:06Z

Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko Reviewed-by: Ulf Hansson Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe

mmc: core: Update ->card_busy() callback comment

2021-08-24T13:20:00Z

According to SD specification checking state of DAT0 only, is enough while polling for card busy completion. Let's update the comment in the header file to correct this, as the comment says DAT[0:3]. Signed-off-by: Mårten Lindahl Link: https://lore.kernel.org/r/20210816153054.24082-1-marten.lindahl@axis.com Signed-off-by: Ulf Hansson

mmc: core: Store pointer to bio_crypt_ctx in mmc_request

2021-08-24T08:15:32Z

Make 'struct mmc_request' contain a pointer to the request's 'struct bio_crypt_ctx' directly, instead of extracting a 32-bit DUN from it which is a cqhci-crypto specific detail. This keeps the cqhci crypto specific details in the cqhci module, and it makes mmc_core and mmc_block ready for MMC crypto hardware that accepts the DUN and/or key in a way that is more flexible than that which will be specified by the eMMC v5.2 standard. Exynos SoCs are an example of such hardware, as their inline encryption hardware takes keys directly (it has no concept of keyslots) and supports 128-bit DUNs. Note that the 32-bit DUN length specified by the standard is very restrictive, so it is likely that more hardware will support longer DUNs despite it not following the standard. Thus, limiting the scope of the 32-bit DUN assumption to the place that actually needs it is warranted. Signed-off-by: Eric Biggers Link: https://lore.kernel.org/r/20210721154738.3966463-1-ebiggers@kernel.org Signed-off-by: Ulf Hansson

brcmfmac: add 43752 SDIO ids and initialization

2021-08-21T16:59:28Z

Add HW and SDIO ids for use with the SparkLan AP6275S Add the firmware mapping structures for the BRCM43752 chipset. The 43752 needs some things setup similar to the 43012 chipset. The WATERMARK shows better performance when initialized to the 4373 value. Signed-off-by: Angus Ainslie Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210812165218.2508258-2-angus@akkea.ca

mmc: Improve function name when aborting a tuning cmd

2021-06-14T11:57:44Z

'mmc_abort_tuning()' made me think tuning gets completely aborted. However, it sends only a STOP cmd to cancel the current tuning cmd. Tuning process may still continue after that. So, rename the function to 'mmc_send_abort_tuning()' to better reflect all this. Signed-off-by: Wolfram Sang Reviewed-by: Niklas Söderlund Link: https://lore.kernel.org/r/20210608180620.40059-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson

mmc: core: Add support for cache ctrl for SD cards

2021-06-14T11:57:38Z

In SD spec v6.x the SD function extension registers for performance enhancements were introduced. As a part of this an optional internal cache on the SD card, can be used to improve performance. The let the SD card use the cache, the host needs to enable it and manage flushing of the cache, so let's add support for this. Note that for an SD card supporting the cache it's mandatory for it, to also support the poweroff notification feature. According to the SD spec, if the cache has been enabled and a poweroff notification is sent to the card, that implicitly also means that the card should flush its internal cache. Therefore, dealing with cache flushing for REQ_OP_FLUSH block requests is sufficient. Reviewed-by: Linus Walleij Signed-off-by: Ulf Hansson Reviewed-by: Avri Altman Link: https://lore.kernel.org/r/20210511101359.83521-1-ulf.hansson@linaro.org

mmc: core: Add support for Power Off Notification for SD cards

2021-06-14T11:57:37Z

Rather than only deselecting the SD card via a CMD7, before we cut power to it at system suspend, at runtime suspend or at shutdown, let's add support for a graceful power off sequence via enabling the SD Power Off Notification feature. Note that, the Power Off Notification feature was added in the SD spec v4.x, which is several years ago. However, it's still a bit unclear how often the SD card vendors decides to implement support for it. To validate these changes a Sandisk Extreme PRO A2 64GB has been used, which seems to work nicely. Signed-off-by: Ulf Hansson Acked-by: Avri Altman Reviewed-by: Linus Walleij Reviewed-by: Shawn Lin Link: https://lore.kernel.org/r/20210504161222.101536-12-ulf.hansson@linaro.org