user/sven/linux.git/include/linux/mmc, branch v5.4.114

mmc: core: Fix size overflow for mmc partitions

2020-10-01T11:17:20Z

[ Upstream commit f3d7c2292d104519195fdb11192daec13229c219 ] With large eMMC cards, it is possible to create general purpose partitions that are bigger than 4GB. The size member of the mmc_part struct is only an unsigned int which overflows for gp partitions larger than 4GB. Change this to a u64 to handle the overflow. Signed-off-by: Bradley Bolen Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Allow host controllers to require R1B for CMD6

2020-04-01T09:01:27Z

[ Upstream commit 1292e3efb149ee21d8d33d725eeed4e6b1ade963 ] It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this. In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout. Suggested-by: Sowjanya Komatineni Cc: Tested-by: Anders Roxell Tested-by: Sowjanya Komatineni Tested-by: Faiz Abbas Tested-By: Peter Geis Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdio: fix wl1251 vendor id

2020-01-26T09:01:07Z

[ Upstream commit e5db673e7fe2f971ec82039a28dc0811c2100e87 ] v4.11-rc1 did introduce a patch series that rearranged the sdio quirks into a header file. Unfortunately this did forget to handle SDIO_VENDOR_ID_TI differently between wl1251 and wl1271 with the result that although the wl1251 was found on the sdio bus, the firmware did not load any more and there was no interface registration. This patch defines separate constants to be used by sdio quirks and drivers. Fixes: 884f38607897 ("mmc: core: move some sdio IDs out of quirks file") Signed-off-by: H. Nikolaus Schaller Cc: # v4.11+ Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: core: Re-work HW reset for SDIO cards

2019-12-21T10:04:24Z

commit 2ac55d5e5ec9ad0a07e194f0eaca865fe5aa3c40 upstream. It have turned out that it's not a good idea to unconditionally do a power cycle and then to re-initialize the SDIO card, as currently done through mmc_hw_reset() -> mmc_sdio_hw_reset(). This because there may be multiple SDIO func drivers probed, who also shares the same SDIO card. To address these scenarios, one may be tempted to use a notification mechanism, as to allow the core to inform each of the probed func drivers, about an ongoing HW reset. However, supporting such an operation from the func driver point of view, may not be entirely trivial. Therefore, let's use a more simplistic approach to solve the problem, by instead forcing the card to be removed and re-detected, via scheduling a rescan-work. In this way, we can rely on existing infrastructure, as the func driver's ->remove() and ->probe() callbacks, becomes invoked to deal with the cleanup and the re-initialization. This solution may be considered as rather heavy, especially if a func driver doesn't share its card with other func drivers. To address this, let's keep the current immediate HW reset option as well, but run it only when there is one func driver probed for the card. Finally, to allow the caller of mmc_hw_reset(), to understand if the reset is being asynchronously managed from a scheduled work, it returns 1 (propagated from mmc_sdio_hw_reset()). If the HW reset is executed successfully and synchronously it returns 0, which maintains the existing behaviour. Reviewed-by: Douglas Anderson Tested-by: Douglas Anderson Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Merge tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping

2019-09-19T20:27:23Z

Pull dma-mapping updates from Christoph Hellwig: - add dma-mapping and block layer helpers to take care of IOMMU merging for mmc plus subsequent fixups (Yoshihiro Shimoda) - rework handling of the pgprot bits for remapping (me) - take care of the dma direct infrastructure for swiotlb-xen (me) - improve the dma noncoherent remapping infrastructure (me) - better defaults for ->mmap, ->get_sgtable and ->get_required_mask (me) - cleanup mmaping of coherent DMA allocations (me) - various misc cleanups (Andy Shevchenko, me) * tag 'dma-mapping-5.4' of git://git.infradead.org/users/hch/dma-mapping: (41 commits) mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLE mmc: queue: Fix bigger segments usage arm64: use asm-generic/dma-mapping.h swiotlb-xen: merge xen_unmap_single into xen_swiotlb_unmap_page swiotlb-xen: simplify cache maintainance swiotlb-xen: use the same foreign page check everywhere swiotlb-xen: remove xen_swiotlb_dma_mmap and xen_swiotlb_dma_get_sgtable xen: remove the exports for xen_{create,destroy}_contiguous_region xen/arm: remove xen_dma_ops xen/arm: simplify dma_cache_maint xen/arm: use dev_is_dma_coherent xen/arm: consolidate page-coherent.h xen/arm: use dma-noncoherent.h calls for xen-swiotlb cache maintainance arm: remove wrappers for the generic dma remap helpers dma-mapping: introduce a dma_common_find_pages helper dma-mapping: always use VM_DMA_COHERENT for generic DMA remap vmalloc: lift the arm flag for coherent mappings to common code dma-mapping: provide a better default ->get_required_mask dma-mapping: remove the dma_declare_coherent_memory export remoteproc: don't allow modular build ...

mmc: queue: Fix bigger segments usage

2019-09-12T12:14:09Z

The commit 38c38cb73223 ("mmc: queue: use bigger segments if DMA MAP layer can merge the segments") always enables the bugger segments if DMA MAP layer can merge the segments, but some controllers (SDHCI) have strictly limitation about the segments size, and then the commit breaks on the controllers. To fix the issue, this patch adds a new flag MMC_CAP2_MERGE_CAPABLE into the struct mmc_host and the bigger segments usage is disabled as default. Reported-by: Thierry Reding Fixes: 38c38cb73223 ("mmc: queue: use bigger segments if DMA MAP layer can merge the segments") Signed-off-by: Yoshihiro Shimoda Acked-by: Ulf Hansson Signed-off-by: Christoph Hellwig

mmc: core: Clarify that the ->ack_sdio_irq() callback is mandatory

2019-09-11T14:10:18Z

For the MMC_CAP2_SDIO_IRQ_NOTHREAD case and when using sdio_signal_irq(), the ->ack_sdio_irq() is already mandatory, which was not the case for those host drivers that called sdio_run_irqs() directly. As there are no longer any drivers calling sdio_run_irqs(), let's clarify the code by dropping the unnecessary check and explicitly state that the callback is mandatory in the header file. Tested-by: Matthias Kaehlcke Reviewed-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson

mmc: core: Add helper function to indicate if SDIO IRQs is enabled

2019-09-11T14:10:18Z

To avoid each host driver supporting SDIO IRQs, from keeping track internally about if SDIO IRQs has been claimed, let's introduce a common helper function, sdio_irq_claimed(). The function returns true if SDIO IRQs are claimed, via using the information about the number of claimed irqs. This is safe, even without any locks, as long as the helper function is called only from runtime/system suspend callbacks of the host driver. Tested-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson

mmc: queue: use bigger segments if DMA MAP layer can merge the segments

2019-09-03T06:32:58Z

When the max_segs of a mmc host is smaller than 512, the mmc subsystem tries to use 512 segments if DMA MAP layer can merge the segments, and then the mmc subsystem exposes such information to the block layer by using blk_queue_can_use_dma_map_merging(). Signed-off-by: Yoshihiro Shimoda Reviewed-by: Ulf Hansson Reviewed-by: Simon Horman Signed-off-by: Christoph Hellwig

Merge tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2019-07-12T01:11:21Z

Pull MMC updates from Ulf Hansson: "MMC core: - Let the dma map ops deal with bouncing and drop dma_max_pfn() from the dma-mapping interface for ARM - Convert the generic MMC DT doc to YAML schemas - Drop questionable support for powered-on re-init of SDIO cards at runtime resume and for SDIO HW reset - Prevent questionable re-init of powered-on removable SDIO cards at system resume - Cleanup and clarify some SDIO core code MMC host: - tmio: Make runtime PM enablement more flexible for variants - tmio/renesas_sdhi: Rename DT doc tmio_mmc.txt to renesas,sdhi.txt to clarify - sdhci-pci: Add support for Intel EHL - sdhci-pci-o2micro: Enable support for 8-bit bus - sdhci-msm: Prevent acquiring a mutex while holding a spin_lock - sdhci-of-esdhc: Improve clock management and tuning - sdhci_am654: Enable support for 4 and 8-bit bus on J721E - sdhci-sprd: Use pinctrl for a proper signal voltage switch - sdhci-sprd: Add support for HS400 enhanced strobe mode - sdhci-sprd: Enable PHY DLL and allow delay config to stabilize the clock - sdhci-sprd: Add support for optional gate clock - sunxi-mmc: Convert DT doc to YAML schemas - meson-gx: Add support for broken DRAM access for DMA MEMSTICK core: - Fixup error path of memstick_init()" * tag 'mmc-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654 mmc: alcor: remove a redundant greater or equal to zero comparison mmc: sdhci-msm: fix mutex while in spinlock mmc: sdhci_am654: Make some symbols static dma-mapping: remove dma_max_pfn mmc: core: let the dma map ops handle bouncing dt-binding: mmc: rename tmio_mmc.txt to renesas,sdhi.txt mmc: sdhci-sprd: Add pin control support for voltage switch dt-bindings: mmc: sprd: Add pinctrl support mmc: sdhci-sprd: Add start_signal_voltage_switch ops mmc: sdhci-pci: Add support for Intel EHL mmc: tmio: Use dma_max_mapping_size() instead of a workaround mmc: sdio: Drop unused in-parameter from mmc_sdio_init_card() mmc: sdio: Drop unused in-parameter to mmc_sdio_reinit_card() mmc: sdio: Don't re-initialize powered-on removable SDIO cards at resume mmc: sdio: Drop powered-on re-init at runtime resume and HW reset mmc: sdio: Move comment about re-initialization to mmc_sdio_reinit_card() mmc: sdio: Drop mmc_claim|release_host() in mmc_sdio_power_restore() mmc: sdio: Turn sdio_run_irqs() into static mmc: sdhci: Fix indenting on SDHCI_CTRL_8BITBUS ...