user/sven/linux.git/include/linux/mmc, branch v6.10.7

Merge tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2024-05-16T15:56:49Z

Pull MMC updates from Ulf Hansson: "MMC core: - Increase the timeout period of the ACMD41 command - Add card entry for quirks to debugfs - Add mmc_gpiod_set_cd_config() function - Store owner from SDIO modules with sdio_register_driver() MMC host: - atmel-mci: Some cleanups and a switch to use dev_err_probe() - renesas_sdhi: - Add support for RZ/G2L, RZ/G3S and RZ/V2M variants - Set the SDBUF after reset - sdhci: Add support for "Tuning Error" interrupts - sdhci-acpi: - Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA - Disable write protect detection on Toshiba WT10-A - Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working - sdhci_am654: - Re-work and fix the tuning support for multiple speed-modes - Add tuning algorithm for delay chain - sdhci-esdhc-imx: Add NXP S32G3 support - sdhci-of-dwcmshc: - Add tuning support for Sophgo CV1800B and SG200X - Implement SDHCI CQE support - sdhci-pci-gli: Use the proper pci_set_power_state() instead of PMCSR writes" MEMSTICK: - Convert a couple of drivers to use the ->remove_new() callback" * tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits) mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list mmc: renesas_sdhi: Set the SDBUF after reset mmc: core: Increase the timeout period of the ACMD41 command mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too mmc: atmel-mci: Switch to use dev_err_probe() mmc: atmel-mci: Incapsulate used to be a platform data into host structure mmc: atmel-mci: Replace platform device pointer by generic one mmc: atmel-mci: Use temporary variable for struct device mmc: atmel-mci: Get rid of platform data leftovers mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning mmc: sdhci-s3c: Choose sdhci_ops based on variant mmc: sdhci_am654: Constify struct sdhci_ops mmc: sdhci-sprd: Constify struct sdhci_ops mmc: sdhci-omap: Constify struct sdhci_ops mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops mmc: slot-gpio: Use irq_handler_t type mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA ...

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

2024-05-15T02:42:24Z

Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...

mmc: slot-gpio: Use irq_handler_t type

2024-04-26T04:47:04Z

The irq_handler_t is already defined globally, let's use it in slot-gpio code. Signed-off-by: Andy Shevchenko Reviewed-by: Alexander Stein Link: https://lore.kernel.org/r/20240410195618.1632778-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson

mmc: core: Add mmc_gpiod_set_cd_config() function

2024-04-26T04:46:02Z

Some mmc host drivers may need to fixup a card-detection GPIO's config to e.g. enable the GPIO controllers builtin pull-up resistor on devices where the firmware description of the GPIO is broken (e.g. GpioInt with PullNone instead of PullUp in ACPI DSDT). Since this is the exception rather then the rule adding a config parameter to mmc_gpiod_request_cd() seems undesirable, so instead add a new mmc_gpiod_set_cd_config() function. This is simply a wrapper to call gpiod_set_config() on the card-detect GPIO acquired through mmc_gpiod_request_cd(). Reviewed-by: Andy Shevchenko Signed-off-by: Hans de Goede Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240410191639.526324-2-hdegoede@redhat.com Signed-off-by: Ulf Hansson

scsi: block: Remove now unused queue limits helpers

2024-04-12T10:32:01Z

Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240409143748.980206-24-hch@lst.de Reviewed-by: Bart Van Assche Reviewed-by: John Garry Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

Merge tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

2024-04-04T02:36:57Z

Kalle Valo says: ==================== wireless-next patches for v6.10 The first "new features" pull request for v6.10 with changes both in stack and in drivers. The big thing in this pull request is that wireless subsystem is now almost free of sparse warnings. There's only one warning left in ath11k which was introduced in v6.9-rc1 and will be fixed via the wireless tree. Realtek drivers continue to improve, now we have support for RTL8922AE and RTL8723CS devices. ath11k also has long waited support for P2P. This time we have a small conflict in iwlwifi, Stephen has an example merge resolution which should help with fixing the conflict: https://lore.kernel.org/all/20240326100945.765b8caf@canb.auug.org.au/ Major changes: rtw89 * RTL8922AE Wi-Fi 7 PCI device support rtw88 * RTL8723CS SDIO device support iwlwifi * don't support puncturing in 5 GHz * support monitor mode on passive channels * BZ-W device support * P2P with HE/EHT support ath11k * P2P support for QCA6390, WCN6855 and QCA2066 * tag 'wireless-next-2024-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (122 commits) wifi: mt76: mt7915: workaround dubious x | !y warning wifi: mwl8k: Avoid -Wflex-array-member-not-at-end warnings wifi: ti: Avoid a hundred -Wflex-array-member-not-at-end warnings wifi: iwlwifi: mvm: fix check in iwl_mvm_sta_fw_id_mask net: rfkill: gpio: Convert to platform remove callback returning void wifi: mac80211: use kvcalloc() for codel vars wifi: iwlwifi: reconfigure TLC during HW restart wifi: iwlwifi: mvm: don't change BA sessions during restart wifi: iwlwifi: mvm: select STA mask only for active links wifi: iwlwifi: mvm: set wider BW OFDMA ignore correctly wifi: iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD cmd v9 wifi: iwlwifi: mvm: Declare HE/EHT capabilities support for P2P interfaces wifi: iwlwifi: mvm: Remove outdated comment wifi: iwlwifi: add support for BZ_W wifi: iwlwifi: Print a specific device name. wifi: iwlwifi: remove wrong CRF_IDs wifi: iwlwifi: remove devices that never came out wifi: iwlwifi: mvm: mark EMLSR disabled in cleanup iterator wifi: iwlwifi: mvm: fix active link counting during recovery wifi: iwlwifi: mvm: assign link STA ID lookups during restart ... ==================== Link: https://lore.kernel.org/r/20240403093625.CF515C433C7@smtp.kernel.org Signed-off-by: Jakub Kicinski

mmc: sdio: store owner from modules with sdio_register_driver()

2024-04-02T10:50:14Z

Modules registering driver with sdio_register_driver() might forget to set .owner field. The field is used by some of other kernel parts for reference counting (try_module_get()), so it is expected that drivers will set it. Solve the problem by moving this task away from the drivers to the core code, just like we did for platform_driver in commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"). Since many drivers forget to set the .owner, this effectively will fix them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010, libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano, wilc1000, wl1251 and more. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Francesco Dolcini Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org Signed-off-by: Ulf Hansson

wifi: rtw88: SDIO device driver for RTL8723CS

2024-03-14T08:59:30Z

This driver uses the new rtw8703b chip driver code. Acked-by: Ping-Ke Shih Acked-by: Ulf Hansson # For SDIO Tested-by: Pavel Machek Signed-off-by: Fiona Klute Signed-off-by: Kalle Valo Link: https://msgid.link/20240311103735.615541-10-fiona.klute@gmx.de

mmc: core: Use a struct device* as in-param to mmc_of_parse_clk_phase()

2024-03-05T11:57:45Z

Parsing dt usually happens very early, sometimes even before the struct mmc_host has been allocated (e.g. dw_mci_probe() and dw_mci_parse_dt() in dw_mmc.c). Looking at the source of mmc_of_parse_clk_phase(), it's actually not needed to have an initialized mmc_host, let's therefore pass a struct device* to it instead. Also update the only current user, sdhci-of-aspeed. Reviewed-by: Paul Menzel Acked-by: Andrew Jeffery Signed-off-by: Yang Xiwen Link: https://lore.kernel.org/r/20240229-b4-mmc-hi3798mv200-v7-1-10c03f316285@outlook.com Signed-off-by: Ulf Hansson

mmc: core: Add wp_grp_size sysfs node

2024-01-02T16:54:05Z

The eMMC card can be set into write-protected mode to prevent data from being accidentally modified or deleted. Wp_grp_size (Write Protect Group Size) refers to an attribute of the eMMC card, used to manage write protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size (Write Protect Group Size) indicates how many eMMC blocks are contained in each write protection group on the eMMC card. To allow userspace easy access of the CSD register bits, let's add sysfs node "wp_grp_size". Signed-off-by: Lin Gui Signed-off-by: Bo Ye Reviewed-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com Signed-off-by: Ulf Hansson