user/sven/linux.git/include/linux/mod_devicetable.h, branch v4.2.4

ACPI / scan: Add support for ACPI _CLS device matching

2015-07-06T23:55:20Z

Device drivers typically use ACPI _HIDs/_CIDs listed in struct device_driver acpi_match_table to match devices. However, for generic drivers, we do not want to list _HID for all supported devices. Also, certain classes of devices do not have _CID (e.g. SATA, USB). Instead, we can leverage ACPI _CLS, which specifies PCI-defined class code (i.e. base-class, subclass and programming interface). This patch adds support for matching ACPI devices using the _CLS method. To support loadable module, current design uses _HID or _CID to match device's modalias. With the new way of matching with _CLS this would requires modification to the current ACPI modalias key to include _CLS. This patch appends PCI-defined class-code to the existing ACPI modalias as following. acpi::::..::: E.g: # cat /sys/devices/platform/AMDI0600:00/modalias acpi:AMDI0600:010601: where bb is th base-class code, ss is te sub-class code, and pp is the programming interface code Since there would not be _HID/_CID in the ACPI matching table of the driver, this patch adds a field to acpi_device_id to specify the matching _CLS. static const struct acpi_device_id ahci_acpi_match[] = { { ACPI_DEVICE_CLASS(PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff) }, {}, }; In this case, the corresponded entry in modules.alias file would be: alias acpi*:010601:* ahci_platform Acked-by: Mika Westerberg Reviewed-by: Hanjun Guo Signed-off-by: Suravee Suthikulpanit Signed-off-by: Rafael J. Wysocki

Merge tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-06-26T22:59:26Z

Pull USB updates from Greg KH: "Here's the big USB patchset for 4.2-rc1. As is normal these days, the majority of changes are in the gadget drivers, with a bunch of other small driver changes. All of these have been in linux-next with no reported issues" * tag 'usb-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (175 commits) usb: dwc3: Use ASCII space in Kconfig usb: chipidea: add work-around for Marvell HSIC PHY startup usb: chipidea: allow multiple instances to use default ci_default_pdata dt-bindings: Consolidate ChipIdea USB ci13xxx bindings phy: add Marvell HSIC 28nm PHY phy: Add Marvell USB 2.0 OTG 28nm PHY dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings USB: ssb: use devm_kzalloc USB: ssb: fix error handling in ssb_hcd_create_pdev() usb: isp1760: check for null return from kzalloc cdc-acm: Add support of ATOL FPrint fiscal printers usb: chipidea: usbmisc_imx: Remove unneeded semicolon USB: usbtmc: add device quirk for Rigol DS6104 USB: serial: mos7840: Use setup_timer phy: twl4030-usb: add ABI documentation phy: twl4030-usb: remove incorrect pm_runtime_get_sync() in probe function. phy: twl4030-usb: remove pointless 'suspended' test in 'suspend' callback. phy: twl4030-usb: make runtime pm more reliable. drivers:usb:fsl: Fix compilation error for fsl ehci drv usb: renesas_usbhs: Don't disable the pipe if Control write status stage ...

mei: fix up uuid matching

2015-05-31T03:14:00Z

A previous commit, c93b76b34b4d ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b34b4d Cc: Tomas Winkler Cc: Samuel Ortiz Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

mei: bus: report also uuid in module alias

2015-05-24T18:15:54Z

In order to automate modules matching add device uuid which is reported in client enumeration, keep also the name that is needed in for nfc distinguishing radio vendor Report mei:name:uuid Cc: linux-api@vger.kernel.org Cc: Samuel Ortiz Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman

usb: add bus type for USB ULPI

2015-05-13T17:04:55Z

UTMI+ Low Pin Interface (ULPI) is a commonly used PHY interface for USB 2.0. The ULPI specification describes a standard set of registers which the vendors can extend for their specific needs. ULPI PHYs provide often functions such as charger detection and ADP sensing and probing. There are two major issues that the bus type is meant to tackle: Firstly, ULPI registers are accessed from the controller. The bus provides convenient method for the controller drivers to share that access with the actual PHY drivers. Secondly, there are already platforms that assume ULPI PHYs are runtime detected, such as many Intel Baytrail based platforms. They do not provide any kind of hardware description for the ULPI PHYs like separate ACPI device object that could be used to enumerate a device from. Signed-off-by: Heikki Krogerus Acked-by: David Cohen Signed-off-by: Felipe Balbi

MIPS: Add CDMM bus support

2015-03-31T10:04:12Z

Add MIPS Common Device Memory Map (CDMM) support in the form of a bus in the standard Linux device model. Each device attached via CDMM is discoverable via an 8-bit type identifier and may contain a number of blocks of memory mapped registers in the CDMM region. IRQs are expected to be handled separately. Due to the per-cpu (per-VPE for MT cores) nature of the CDMM devices, all the driver callbacks take place from workqueues which are run on the right CPU for the device in question, so that the driver doesn't need to be as concerned about which CPU it is running on. Callbacks also exist for when CPUs are taken offline, so that any per-CPU resources used by the driver can be disabled so they don't get forcefully migrated. CDMM devices are created as children of the CPU device they are attached to. Any existing CDMM configuration by the bootloader will be inherited, however platforms wishing to enable CDMM should implement the weak mips_cdmm_phys_base() function (see asm/cdmm.h) so that the bus driver knows where it should put the CDMM region in the physical address space if the bootloader hasn't already enabled it. A mips_cdmm_early_probe() function is also provided to allow early boot or particularly low level code to set up the CDMM region and probe for a specific device type, for example early console or KGDB IO drivers for the EJTAG Fast Debug Channel (FDC) CDMM device. Signed-off-by: James Hogan Cc: Greg Kroah-Hartman Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9599/ Signed-off-by: Ralf Baechle

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2015-02-18T01:41:19Z

Pull networking updates from David Miller: 1) Missing netlink attribute validation in nft_lookup, from Patrick McHardy. 2) Restrict ipv6 partial checksum handling to UDP, since that's the only case it works for. From Vlad Yasevich. 3) Clear out silly device table sentinal macros used by SSB and BCMA drivers. From Joe Perches. 4) Make sure the remote checksum code never creates a situation where the remote checksum is applied yet the tunneling metadata describing the remote checksum transformation is still present. Otherwise an external entity might see this and apply the checksum again. From Tom Herbert. 5) Use msecs_to_jiffies() where applicable, from Nicholas Mc Guire. 6) Don't explicitly initialize timer struct fields, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 7) Don't invoke tg3_halt() without the tp->lock held, from Jun'ichi Nomura. 8) Missing __percpu annotation in ipvlan driver, from Eric Dumazet. 9) Don't potentially perform skb_get() on shared skbs, also from Eric Dumazet. 10) Fix COW'ing of metrics for non-DST_HOST routes in ipv6, from Martin KaFai Lau. 11) Fix merge resolution error between the iov_iter changes in vhost and some bug fixes that occurred at the same time. From Jason Wang. 12) If rtnl_configure_link() fails we have to perform a call to ->dellink() before unregistering the device. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (39 commits) net: dsa: Set valid phy interface type rtnetlink: call ->dellink on failure when ->newlink exists com20020-pci: add support for eae single card vhost_net: fix wrong iter offset when setting number of buffers net: spelling fixes net/core: Fix warning while make xmldocs caused by dev.c net: phy: micrel: disable NAND-tree for KSZ8021, KSZ8031, KSZ8051, KSZ8081 ipv6: fix ipv6_cow_metrics for non DST_HOST case openvswitch: Fix key serialization. r8152: restore hw settings hso: fix rx parsing logic when skb allocation fails tcp: make sure skb is not shared before using skb_get() bridge: netfilter: Move sysctl-specific error code inside #ifdef ipv6: fix possible deadlock in ip6_fl_purge / ip6_fl_gc ipvlan: add a missing __percpu pcpu_stats tg3: Hold tp->lock before calling tg3_halt() from tg3_init_one() bgmac: fix device initialization on Northstar SoCs (condition typo) qlcnic: Delete existing multicast MAC list before adding new net/mlx5_core: Fix configuration of log_uar_page_sz sunvnet: don't change gso data on clones ...

Merge tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2015-02-15T18:24:55Z

Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...

treewide: Remove unnecessary SSB_DEVTABLE_END macro

2015-02-11T22:38:29Z

Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches Signed-off-by: David S. Miller

treewide: Remove unnecessary BCMA_CORETABLE_END macro

2015-02-11T22:38:28Z

Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches Signed-off-by: David S. Miller