user/sven/linux.git/include/linux/module.h, branch v4.9.186

modules: mark inittest/exittest as __maybe_unused

2018-11-23T07:20:35Z

commit 1f318a8bafcfba9f0d623f4870c4e890fd22e659 upstream. clang warns about unused inline functions by default: arch/arm/crypto/aes-cipher-glue.c:68:1: warning: unused function '__inittest' [-Wunused-function] arch/arm/crypto/aes-cipher-glue.c:69:1: warning: unused function '__exittest' [-Wunused-function] As these appear in every single module, let's just disable the warnings by marking the two functions as __maybe_unused. Signed-off-by: Arnd Bergmann Reviewed-by: Miroslav Benes Acked-by: Rusty Russell Signed-off-by: Jessica Yu Signed-off-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman

module/retpoline: Warn about missing retpoline in module

2018-02-13T11:35:58Z

(cherry picked from commit caf7501a1b4ec964190f31f9c3f163de252273b8) There's a risk that a kernel which has full retpoline mitigations becomes vulnerable when a module gets loaded that hasn't been compiled with the right compiler or the right option. To enable detection of that mismatch at module load time, add a module info string "retpoline" at build time when the module was compiled with retpoline support. This only covers compiled C source, but assembler source or prebuilt object files are not checked. If a retpoline enabled kernel detects a non retpoline protected module at load time, print a warning and report it in the sysfs vulnerability file. [ tglx: Massaged changelog ] Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Cc: David Woodhouse Cc: gregkh@linuxfoundation.org Cc: torvalds@linux-foundation.org Cc: jeyu@kernel.org Cc: arjan@linux.intel.com Link: https://lkml.kernel.org/r/20180125235028.31211-1-andi@firstfloor.org Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman

modules: add ro_after_init support

2016-08-04T00:46:55Z

Add ro_after_init support for modules by adding a new page-aligned section in the module layout (after rodata) for ro_after_init data and enabling RO protection for that section after module init runs. Signed-off-by: Jessica Yu Acked-by: Kees Cook Signed-off-by: Rusty Russell

exceptions: fork exception table content from module.h into extable.h

2016-08-04T00:46:54Z

For historical reasons (i.e. pre-git) the exception table stuff was buried in the middle of the module.h file. I noticed this while doing an audit for needless includes of module.h and found core kernel files (both arch specific and arch independent) were just including module.h for this. The converse is also true, in that conventional drivers, be they for filesystems or actual hardware peripherals or similar, do not normally care about the exception tables. Here we fork the exception table content out of module.h into a new file called extable.h -- and temporarily include it into the module.h itself. Then we will work our way across the arch independent and arch specific files needing just exception table content, and move them off module.h and onto extable.h Once that is done, we can remove the extable.h from module.h and in doing it like this, we avoid introducing build failures into the git history. The gain here is that module.h gets a bit smaller, across all modular drivers that we build for allmodconfig. Also the core files that only need exception table stuff don't have an include of module.h that brings in lots of extra stuff and just looks generally out of place. Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Paul Gortmaker Signed-off-by: Rusty Russell

module: fix noreturn attribute for __module_put_and_exit()

2016-07-27T03:08:00Z

__module_put_and_exit() is makred noreturn in module.h declaration, but is lacking the attribute in the definition, which makes some tools (such as sparse) unhappy. Amend the definition with the attribute as well (and reformat the declaration so that it uses more common format). Signed-off-by: Jiri Kosina Signed-off-by: Rusty Russell

module: preserve Elf information for livepatch modules

2016-04-01T13:00:10Z

For livepatch modules, copy Elf section, symbol, and string information from the load_info struct in the module loader. Persist copies of the original symbol table and string table. Livepatch manages its own relocation sections in order to reuse module loader code to write relocations. Livepatch modules must preserve Elf information such as section indices in order to apply livepatch relocation sections using the module loader's apply_relocate_add() function. In order to apply livepatch relocation sections, livepatch modules must keep a complete copy of their original symbol table in memory. Normally, a stripped down copy of a module's symbol table (containing only "core" symbols) is made available through module->core_symtab. But for livepatch modules, the symbol table copied into memory on module load must be exactly the same as the symbol table produced when the patch module was compiled. This is because the relocations in each livepatch relocation section refer to their respective symbols with their symbol indices, and the original symbol indices (and thus the symtab ordering) must be preserved in order for apply_relocate_add() to find the right symbol. Signed-off-by: Jessica Yu Reviewed-by: Miroslav Benes Acked-by: Josh Poimboeuf Acked-by: Rusty Russell Reviewed-by: Rusty Russell Signed-off-by: Jiri Kosina

modules: fix longstanding /proc/kallsyms vs module insertion race.

2016-02-03T06:28:15Z

For CONFIG_KALLSYMS, we keep two symbol tables and two string tables. There's one full copy, marked SHF_ALLOC and laid out at the end of the module's init section. There's also a cut-down version that only contains core symbols and strings, and lives in the module's core section. After module init (and before we free the module memory), we switch the mod->symtab, mod->num_symtab and mod->strtab to point to the core versions. We do this under the module_mutex. However, kallsyms doesn't take the module_mutex: it uses preempt_disable() and rcu tricks to walk through the modules, because it's used in the oops path. It's also used in /proc/kallsyms. There's nothing atomic about the change of these variables, so we can get the old (larger!) num_symtab and the new symtab pointer; in fact this is what I saw when trying to reproduce. By grouping these variables together, we can use a carefully-dereferenced pointer to ensure we always get one or the other (the free of the module init section is already done in an RCU callback, so that's safe). We allocate the init one at the end of the module init section, and keep the core one inside the struct module itself (it could also have been allocated at the end of the module core, but that's probably overkill). Reported-by: Weilong Chen Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111541 Cc: stable@kernel.org Signed-off-by: Rusty Russell

module: clean up RO/NX handling.

2015-12-04T21:46:26Z

Modules have three sections: text, rodata and writable data. The code handled the case where these overlapped, however they never can: debug_align() ensures they are always page-aligned. This is why we got away with manually traversing the pages in set_all_modules_text_rw() without rounding. We create three helper functions: frob_text(), frob_rodata() and frob_writable_data(). We then call these explicitly at every point, so it's clear what we're doing. We also expose module_enable_ro() and module_disable_ro() for livepatch to use. Reviewed-by: Josh Poimboeuf Signed-off-by: Rusty Russell Signed-off-by: Jiri Kosina

module: use a structure to encapsulate layout.

2015-12-04T21:46:25Z

Makes it easier to handle init vs core cleanly, though the change is fairly invasive across random architectures. It simplifies the rbtree code immediately, however, while keeping the core data together in the same cachline (now iff the rbtree code is enabled). Acked-by: Peter Zijlstra Reviewed-by: Josh Poimboeuf Signed-off-by: Rusty Russell Signed-off-by: Jiri Kosina

module: relocate module_init from init.h to module.h

2015-07-06T03:59:14Z

Modular users will always be users of init functionality, but users of init functionality are not necessarily always modules. Hence any functionality like module_init and module_exit would be more at home in the module.h file. And module.h should explicitly include init.h to make the dependency clear. We've already done all the legwork needed to ensure that this move does not cause any build regressions due to implicit header file include assumptions about where module_init lives. Cc: Rusty Russell Acked-by: Rusty Russell Signed-off-by: Paul Gortmaker