user/sven/linux.git/include/linux/msi.h, branch v4.18-rc2

genirq/msi: Allow level-triggered MSIs to be exposed by MSI providers

2018-05-13T13:58:59Z

So far, MSIs have been used to signal edge-triggered interrupts, as a write is a good model for an edge (you can't "unwrite" something). On the other hand, routing zillions of wires in an SoC because you need level interrupts is a bit extreme. People have come up with a variety of schemes to support this, which involves sending two messages: one to signal the interrupt, and one to clear it. Since the kernel cannot represent this, we've ended up with side-band mechanisms that are pretty awful. Instead, let's acknoledge the requirement, and ensure that, under the right circumstances, the irq_compose_msg and irq_write_msg can take as a parameter an array of two messages instead of a pointer to a single one. We also add some checking that the compose method only clobbers the second message if the MSI domain has been created with the MSI_FLAG_LEVEL_CAPABLE flags. Signed-off-by: Marc Zyngier Signed-off-by: Thomas Gleixner Cc: Rob Herring Cc: Jason Cooper Cc: Ard Biesheuvel Cc: Srinivas Kandagatla Cc: Thomas Petazzoni Cc: Miquel Raynal Link: https://lkml.kernel.org/r/20180508121438.11301-2-marc.zyngier@arm.com

Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-11-14T01:33:11Z

Pull irq core updates from Thomas Gleixner: "A rather large update for the interrupt core code and the irq chip drivers: - Add a new bitmap matrix allocator and supporting changes, which is used to replace the x86 vector allocator which comes with separate pull request. This allows to replace the convoluted nested loop allocation function in x86 with a facility which supports the recently added property of managed interrupts proper and allows to switch to a best effort vector reservation scheme, which addresses problems with vector exhaustion. - A large update to the ARM GIC-V3-ITS driver adding support for range selectors. - New interrupt controllers: - Meson and Meson8 GPIO - BCM7271 L2 - Socionext EXIU If you expected that this will stop at some point, I have to disappoint you. There are new ones posted already. Sigh! - STM32 interrupt controller support for new platforms. - A pile of fixes, cleanups and updates to the MIPS GIC driver - The usual small fixes, cleanups and updates all over the place. Most visible one is to move the irq chip drivers Kconfig switches into a separate Kconfig menu" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits) genirq: Fix type of shifting literal 1 in __setup_irq() irqdomain: Drop pointless NULL check in virq_debug_show_one genirq/proc: Return proper error code when irq_set_affinity() fails irq/work: Use llist_for_each_entry_safe irqchip: mips-gic: Print warning if inherited GIC base is used irqchip/mips-gic: Add pr_fmt and reword pr_* messages irqchip/stm32: Move the wakeup on interrupt mask irqchip/stm32: Fix initial values irqchip/stm32: Add stm32h7 support dt-bindings/interrupt-controllers: Add compatible string for stm32h7 irqchip/stm32: Add multi-bank management irqchip/stm32: Select GENERIC_IRQ_CHIP irqchip/exiu: Add support for Socionext Synquacer EXIU controller dt-bindings: Add description of Socionext EXIU interrupt controller irqchip/gic-v3-its: Fix VPE activate callback return value irqchip: mips-gic: Make IPI bitmaps static irqchip: mips-gic: Share register writes in gic_set_type() irqchip: mips-gic: Remove gic_vpes variable irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs irqchip: mips-gic: Configure EIC when CPUs come online ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

genirq/irqdomain: Add force reactivation flag to irq domains

2017-09-25T18:38:25Z

Allow irqdomains to tell the core code, that after early activation the interrupt needs to be reactivated at request_irq() time. This allows reservation of vectors at early activation time and actual vector assignment at request_irq() time. Signed-off-by: Thomas Gleixner Tested-by: Juergen Gross Tested-by: Yu Chen Acked-by: Juergen Gross Cc: Boris Ostrovsky Cc: Tony Luck Cc: Marc Zyngier Cc: Alok Kataria Cc: Joerg Roedel Cc: "Rafael J. Wysocki" Cc: Steven Rostedt Cc: Christoph Hellwig Cc: Peter Zijlstra Cc: Borislav Petkov Cc: Paolo Bonzini Cc: Rui Zhang Cc: "K. Y. Srinivasan" Cc: Arjan van de Ven Cc: Dan Williams Cc: Len Brown Link: https://lkml.kernel.org/r/20170913213153.106242536@linutronix.de

staging: fsl-mc: add missing fsl_mc comment in struct msi_desc

2017-07-30T15:23:27Z

The mc-bus specific field, fsl_mc in struct msi_desc is missing its comment so add it. Signed-off-by: Laurentiu Tudor Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

Merge tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2017-02-23T19:53:22Z

Pull PCI updates from Bjorn Helgaas: - add ASPM L1 substate support - enable PCIe Extended Tags when supported - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx - increase VPD access timeout - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432 - use new pci_irq_alloc_vectors() in more drivers - fix MSI affinity memory leak - remove unused MSI interfaces and update documentation - remove unused AER .link_reset() callback - avoid pci_lock / p->pi_lock deadlock seen with perf - serialize sysfs enable/disable num_vfs operations - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and refactor so we can support both hosts and endpoints - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers - add Rockchip system power management support - add Thunder-X cn81xx and cn83xx support - add Exynos 5440 PCIe PHY support * tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits) PCI: dwc: Remove dependency of designware on CONFIG_PCI PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host PCI: dwc: Split pcie-designware.c into host and core files PCI: dwc: designware: Fix style errors in pcie-designware.c PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc() PCI: dwc: all: Split struct pcie_port into host-only and core structures PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init() PCI: dwc: all: Rename cfg_read/cfg_write to read/write PCI: dwc: all: Use platform_set_drvdata() to save private data PCI: dwc: designware: Move register defines to designware header file PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code PCI: dra7xx: Group PHY API invocations PCI: dra7xx: Enable MSI and legacy interrupts simultaneously PCI: dra7xx: Add support to force RC to work in GEN1 mode PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional() PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory PCI: exynos: Support the PHY generic framework Documentation: binding: Modify the exynos5440 PCIe binding phy: phy-exynos-pcie: Add support for Exynos PCIe PHY Documentation: samsung-phy: Add exynos-pcie-phy binding ...

genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg

2017-02-16T14:32:19Z

A bug fix to the MSIx handling in vfio added references to functions that may not be defined if MSI is disabled in the kernel, resulting in this link error: drivers/built-in.o: In function `vfio_msi_set_vector_signal': :(.text+0x450808): undefined reference to `get_cached_msi_msg' :(.text+0x45080c): undefined reference to `write_msi_msg' As suggested by Alex Williamson, add stub implementations for get_cached_msi_msg() and pci_write_msi_msg(). In case this bugfix gets backported, please note that the #ifdef has changed over time, originally both functions were implemented in drivers/pci/msi.c and controlled by CONFIG_PCI_MSI, while nowadays get_cached_msi_msg() is part of the generic MSI support and can be used without PCI. Fixes: b8f02af096b1 ("vfio/pci: Restore MSIx message prior to enabling") Signed-off-by: Arnd Bergmann Cc: Marc Zyngier Cc: Alex Williamson Cc: Bjorn Helgaas Cc: Bart Van Assche Link: http://lkml.kernel.org/r/1413190208.4202.34.camel@ul30vt.home Link: http://lkml.kernel.org/r/20170214215343.3307861-1-arnd@arndb.de Signed-off-by: Thomas Gleixner

PCI/MSI: Remove pci_msi_domain_{alloc,free}_irqs()

2017-02-10T20:30:33Z

Just call the msi_* version directly instead of having trivial wrappers for one or two callsites. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner

PCI/MSI: Remove unused pci_msi_create_default_irq_domain()

2017-02-10T20:29:45Z

pci_msi_create_default_irq_domain() is never called in the whole tree, so remove it as well as all the supporting code for a default PCI MSI domain. Signed-off-by: Christoph Hellwig Signed-off-by: Bjorn Helgaas Reviewed-by: Thomas Gleixner

genirq/msi: Add cpumask allocation to alloc_msi_entry

2016-09-14T20:11:08Z

For irq spreading want to store affinity masks in the msi_entry. Add the infrastructure for it. We allocate an array of cpumasks with an array size of the number of used vectors in the entry, so we can hand in the information per linux interrupt later. As we hand in the number of used vectors, we assign them right away. Convert all the call sites. Signed-off-by: Thomas Gleixner Cc: axboe@fb.com Cc: keith.busch@intel.com Cc: agordeev@redhat.com Cc: linux-block@vger.kernel.org Cc: Christoph Hellwig Link: http://lkml.kernel.org/r/1473862739-15032-2-git-send-email-hch@lst.de