user/sven/linux.git/include/linux/mtd, branch v3.2.65

mtd: map: fixed bug in 64-bit systems

2014-01-03T04:33:18Z

commit a4d62babf988fe5dfde24437fa135ef147bc7aa0 upstream. Hardware: CPU: XLP832,the 64-bit OS NOR Flash:S29GL128S 128M Software: Kernel:2.6.32.41 Filesystem:JFFS2 When writing files, errors appear: Write len 182 but return retlen 180 Write of 182 bytes at 0x072c815c failed. returned -5, retlen 180 Write len 186 but return retlen 184 Write of 186 bytes at 0x072caff4 failed. returned -5, retlen 184 These errors exist only in 64-bit systems,not in 32-bit systems. After analysis, we found that the left shift operation is wrong in map_word_load_partial. For instance: unsigned char buf[3] ={0x9e,0x3a,0xea}; map_bankwidth(map) is 4; for (i=0; i < 3; i++) { int bitpos; bitpos = (map_bankwidth(map)-1-i)*8; orig.x[0] &= ~(0xff << bitpos); orig.x[0] |= buf[i] << bitpos; } The value of orig.x[0] is expected to be 0x9e3aeaff, but in this situation(64-bit System) we'll get the wrong value of 0xffffffff9e3aeaff due to the 64-bit sign extension: buf[i] is defined as "unsigned char" and the left-shift operation will convert it to the type of "signed int", so when left-shift buf[i] by 24 bits, the final result will get the wrong value: 0xffffffff9e3aeaff. If the left-shift bits are less than 24, then sign extension will not occur. Whereas the bankwidth of the nor flash we used is 4, therefore this BUG emerges. Signed-off-by: Pang Xunlei Signed-off-by: Zhang Yi Signed-off-by: Lu Zhongjun Signed-off-by: Brian Norris Signed-off-by: Ben Hutchings

mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

2012-10-30T23:26:28Z

commit bf7a01bf7987b63b121d572b240c132ec44129c4 upstream. The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It silently masks off at least one flag that might be set by the driver (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly others. Really, as long as driver writers exercise a small amount of care with NAND_* options, this mask is not necessary at all; it was only here to prevent certain options from accidentally being set by the driver. But the original thought turns out to be a bad idea occasionally. Thus, kill it. Note, this patch fixes some major gpmi-nand breakage. Signed-off-by: Brian Norris Tested-by: Huang Shijie Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse [Brian Norris: This is a backport for v3.2 stable.] Signed-off-by: Ben Hutchings

mtd: map.h: fix arm cross-build failure

2012-05-20T21:56:52Z

commit 4a42243886b87cd28a39b192161767c2af851a55 upstream. This patch fixes the following build failure: In file included from include/linux/mtd/qinfo.h:4:0, from include/linux/mtd/pfow.h:7, from drivers/mtd/lpddr/lpddr_cmds.c:27: include/linux/mtd/map.h: In function 'inline_map_read': include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Signed-off-by: Ben Hutchings

Merge git://git.infradead.org/mtd-2.6

2011-11-07T17:11:16Z

* git://git.infradead.org/mtd-2.6: (226 commits) mtd: tests: annotate as DANGEROUS in Kconfig mtd: tests: don't use mtd0 as a default mtd: clean up usage of MTD_DOCPROBE_ADDRESS jffs2: add compr=lzo and compr=zlib options jffs2: implement mount option parsing and compression overriding mtd: nand: initialize ops.mode mtd: provide an alias for the redboot module name mtd: m25p80: don't probe device which has status of 'disabled' mtd: nand_h1900 never worked mtd: Add DiskOnChip G3 support mtd: m25p80: add EON flash EN25Q32B into spi flash id table mtd: mark block device queue as non-rotational mtd: r852: make r852_pm_ops static mtd: m25p80: add support for at25df321a spi data flash mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks mtd: nand: switch `check_pattern()' to standard `memcmp()' mtd: nand: invalidate cache on unaligned reads mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set mtd: nand: wait to set BBT version mtd: nand: scrub BBT on ECC errors ... Fix up trivial conflicts: - arch/arm/mach-at91/board-usb-a9260.c Merged into board-usb-a926x.c - drivers/mtd/maps/lantiq-flash.c add_mtd_partitions -> mtd_device_register vs changed to use mtd_device_parse_register.

include: replace linux/module.h with "struct module" wherever possible

2011-10-31T23:32:32Z

The pretty much brings in the kitchen sink along with it, so it should be avoided wherever reasonably possible in terms of being included from other commonly used files, as it results in a measureable increase on compile times. The worst culprit was probably device.h since it is used everywhere. This file also had an implicit dependency/usage of mutex.h which was masked by module.h, and is also fixed here at the same time. There are over a dozen other headers that simply declare the struct instead of pulling in the whole file, so follow their lead and simply make it a few more. Most of the implicit dependencies on module.h being present by these headers pulling it in have been now weeded out, so we can finally make this change with hopefully minimal breakage. Signed-off-by: Paul Gortmaker

mtd: define `mtd_is_*()' functions

2011-09-21T06:19:06Z

These functions can be used instead of referencing -EUCLEAN and -EBADMSG all over the place. They should help make code a little bit more readable. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

mtd: nand: kill member `ops' of `struct nand_chip'

2011-09-11T12:57:44Z

The nand_chip.ops field is a struct that is passed around globally with no particular reason. Every time it is used, it could just as easily be replaced with a local struct that is updated on each operation. So make it local. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

mtd: document ABI

2011-09-11T12:57:44Z

We're missing a lot of important documentation in include/mtd/mtd-abi.h: * add a simple description of each ioctl (feel free to expand!) * give full explanations of recently added and modified operations * explain the usage of "RAW" that appear in different modes and types of operations * fix some comment style along the way Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

mtd: rename MTD_OOB_* to MTD_OPS_*

2011-09-11T12:28:59Z

These modes are not necessarily for OOB only. Particularly, MTD_OOB_RAW affected operations on in-band page data as well. To clarify these options and to emphasize that their effect is applied per-operation, we change the primary prefix to MTD_OPS_. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy

mtd: move mtd_oob_mode_t to shared kernel/user space

2011-09-11T12:26:20Z

We will want to use the MTD_OOB_{PLACE,AUTO,RAW} modes in user-space applications through the introduction of new ioctls, so we should make this enum a shared type. This enum is now anonymous. Artem: tweaked the patch. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy