user/sven/linux.git/include/linux/mtd, branch v4.13.10

mtd: nand: Declare tBERS, tR and tPROG as u64 to avoid integer overflow

2017-08-02T08:26:42Z

All timings in nand_sdr_timings are expressed in picoseconds but some of them may not fit in an u32. Signed-off-by: Boris Brezillon Fixes: 204e7ecd47e2 ("mtd: nand: Add a few more timings to nand_sdr_timings") Reported-by: Alexander Dahl Cc: Reviewed-by: Alexander Dahl Tested-by: Alexander Dahl Signed-off-by: Boris Brezillon

Merge tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd

2017-07-13T19:07:44Z

Pull MTD updates from Brian Norris: "General updates: - Cleanups and additional flash support for "dataflash" driver - new driver for mchp23k256 SPI SRAM device - improve handling of MTDs without eraseblocks (i.e., MTD_NO_ERASE) - refactor and improve "sub-partition" handling with TRX partition parser; partitions can now be created as sub-partitions of another partition SPINOR updates, from Cyrille Pitchen and Marek Vasut: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. NAND updates, from Boris Brezillon: - addition of on-die ECC support to Micron driver - addition of helpers to help drivers choose most appropriate ECC settings - deletion of dead-code (cached programming and ->errstat() hook) - make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) - change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag - support exiting 'GET STATUS' command in default ->cmdfunc() implementations - change the prototype of ->setup_data_interface() A bunch of driver related changes: - various cleanup, fixes and improvements of the MTK driver - OMAP DT bindings fixes - support for ->setup_data_interface() in the fsmc driver - support for imx7 in the gpmi driver - finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) - fix "bitflips in erased pages" handling in the ifc driver - addition of PM ops and dynamic timing configuration to the atmel driver" * tag 'for-linus-20170713' of git://git.infradead.org/linux-mtd: (118 commits) Documentation: ABI: mtd: describe "offset" more precisely mtd: Fix check in mtd_unpoint() mtd: nand: mtk: release lock on error path mtd: st_spi_fsm: remove SPINOR_OP_RDSR2 and use SPINOR_OP_RDCR instead mtd: spi-nor: cqspi: remove duplicate const mtd: spi-nor: Add support for Spansion S25FL064L mtd: spi-nor: Add support for mx66u51235f mtd: nand: mtk: add ->setup_data_interface() hook mtd: nand: mtk: remove unneeded mtk_ecc_hw_init from mtk_ecc_resume mtd: nand: mtk: remove unneeded mtk_nfc_hw_init from mtk_nfc_resume mtd: nand: mtk: disable ecc irq when writing page with hwecc mtd: nand: mtk: fix incorrect register setting order about ecc irq mtd: partitions: fixup some allocate_partition() whitespace mtd: parsers: trx: fix pr_err format for printing offset MAINTAINERS: Update SPI NOR subsystem git repositories mtd: extract TRX parser out of bcm47xxpart into a separated module mtd: partitions: add support for partition parsers mtd: partitions: add support for subpartitions mtd: partitions: rename "master" to the "parent" where appropriate mtd: partitions: remove sysfs files when deleting all master's partitions ...

Merge tag 'nand/for-4.13' into MTD

2017-07-08T01:03:11Z

From Boris: """ This pull request contains the following core changes: * addition of on-ecc support to Micron driver * addition of helpers to help drivers choose most appropriate ECC settings * deletion of dead-code (cached programming and ->errstat() hook) * make sure drivers that do not support the SET/GET FEATURES command return ENOTSUPP use a dummy ->set/get_features implementation returning -ENOTSUPP (required for Micron on-die ECC) * change the semantic of ecc->write_page() for drivers setting the NAND_ECC_CUSTOM_PAGE_ACCESS flag * support exiting 'GET STATUS' command in default ->cmdfunc() implementations * change the prototype of ->setup_data_interface() A bunch of driver related changes: * various cleanup, fixes and improvements of the MTK driver * OMAP DT bindings fixes * support for ->setup_data_interface() in the fsmc driver * support for imx7 in the gpmi driver * finalization of the denali driver rework (thanks to Masahiro for the work he's done on this driver) * fix "bitflips in erased pages" handling in the ifc driver * addition of PM ops and dynamic timing configuration to the atmel driver And as usual we also have a few minor cleanup/fixes/improvements patches across the subsystem. """

Merge tag 'spi-nor/for-4.13' into MTD

2017-07-08T01:00:06Z

From Cyrille: """ This pull request contains the following notable changes: - introduce support to the SPI 1-2-2 and 1-4-4 protocols. - introduce support to the Double Data Rate (DDR) mode. - introduce support to the Octo SPI protocols. - add support to new memory parts for Spansion, Macronix and Winbond. - add fixes for the Aspeed, STM32 and Cadence QSPI controler drivers. - clean up the st_spi_fsm driver. """

mtd: partitions: add support for partition parsers

2017-06-22T20:13:09Z

Some devices have partitions that are kind of containers with extra subpartitions / volumes instead of e.g. a simple filesystem data. To support such cases we need to first create normal flash device partitions and then take care of these special ones. It's very common case for home routers. Depending on the vendor there are formats like TRX, Seama, TP-Link, WRGG & more. All of them are used to embed few partitions into a single one / single firmware file. Ideally all vendors would use some well documented / standardized format like UBI (and some probably start doing so), but there are still countless devices on the market using these poor vendor specific formats. This patch extends MTD subsystem by allowing to specify list of parsers that should be tried for a given partition. Supporting such poor formats is highly unlikely to be the top priority so these changes try to minimize maintenance cost to the minimum. It reuses existing code for these new parsers and just adds a one property and one new function. This implementation requires setting partition parsers in a flash parser. A proper change of bcm47xxpart will follow and in the future we will hopefully also find a solution for doing it with ofpart ("fixed-partitions"). Signed-off-by: Rafał Miłecki Signed-off-by: Brian Norris

mtd: nand: add a shorthand to generate nand_ecc_caps structure

2017-06-10T11:40:10Z

struct nand_ecc_caps was designed as flexible as possible to support multiple stepsizes (like sunxi_nand.c). So, we need to write multiple arrays even for the simplest case. I guess many controllers support a single stepsize, so here is a shorthand macro for the case. It allows to describe like ... NAND_ECC_CAPS_SINGLE(denali_pci_ecc_caps, denali_calc_ecc_bytes, 512, 8, 15); ... instead of static const int denali_pci_ecc_strengths[] = {8, 15}; static const struct nand_ecc_step_info denali_pci_ecc_stepinfo = { .stepsize = 512, .strengths = denali_pci_ecc_strengths, .nstrengths = ARRAY_SIZE(denali_pci_ecc_strengths), }; static const struct nand_ecc_caps denali_pci_ecc_caps = { .stepinfos = &denali_pci_ecc_stepinfo, .nstepinfos = 1, .calc_ecc_bytes = denali_calc_ecc_bytes, }; Signed-off-by: Masahiro Yamada Signed-off-by: Boris Brezillon

mtd: nand: add generic helpers to check, match, maximize ECC settings

2017-06-10T11:40:07Z

Driver are responsible for setting up ECC parameters correctly. Those include: - Check if ECC parameters specified (usually by DT) are valid - Meet the chip's ECC requirement - Maximize ECC strength if NAND_ECC_MAXIMIZE flag is set The logic can be generalized by factoring out common code. This commit adds 3 helpers to the NAND framework: nand_check_ecc_caps - Check if preset step_size and strength are valid nand_match_ecc_req - Match the chip's requirement nand_maximize_ecc - Maximize the ECC strength To use the helpers above, a driver needs to provide: - Data array of supported ECC step size and strength - A hook that calculates ECC bytes from the combination of step_size and strength. By using those helpers, code duplication among drivers will be reduced. Signed-off-by: Masahiro Yamada Signed-off-by: Boris Brezillon

mtd: nand: Drop the ->errstat() hook

2017-06-01T08:09:31Z

The ->errstat() hook is no longer implemented NAND controller drivers. Get rid of it before someone starts abusing it. Signed-off-by: Boris Brezillon

mtd: nand: Pass the CS line to ->setup_data_interface()

2017-06-01T08:09:28Z

Some NAND controllers can assign different NAND timings to different CS lines. Pass the CS line information to ->setup_data_interface() so that the NAND controller driver knows which CS line is concerned by the setup_data_interface() request. Signed-off-by: Boris Brezillon

mtd: nand: add support for Micron on-die ECC

2017-06-01T08:09:23Z

Now that the core NAND subsystem has support for on-die ECC, this commit brings the necessary code to support on-die ECC on Micron NANDs. In micron_nand_init(), we detect if the Micron NAND chip supports on-die ECC mode, by checking a number of conditions: - It must be an ONFI NAND - It must be a SLC NAND - Enabling *and* disabling on-die ECC must work - The on-die ECC must be correcting 4 bits per 512 bytes of data. Some Micron NAND chips have an on-die ECC able to correct 8 bits per 512 bytes of data, but they work slightly differently and therefore we don't support them in this patch. Then, if the on-die ECC cannot be disabled (some Micron NAND have on-die ECC forcefully enabled), we bail out, as we don't support such NANDs. Indeed, the implementation of raw_read()/raw_write() make the assumption that on-die ECC can be disabled. Support for Micron NANDs with on-die ECC forcefully enabled can easily be added, but in the absence of such HW for testing, we preferred to simply bail out. If the on-die ECC is supported, and requested in the Device Tree, then it is indeed enabled, by using custom implementations of the ->read_page(), ->read_page_raw(), ->write_page() and ->write_page_raw() operation to properly handle the on-die ECC. In the non-raw functions, we need to enable the internal ECC engine before issuing the NAND_CMD_READ0 or NAND_CMD_SEQIN commands, which is why we set the NAND_ECC_CUSTOM_PAGE_ACCESS option at initialization time (it asks the NAND core to let the NAND driver issue those commands). Signed-off-by: Thomas Petazzoni Signed-off-by: Boris Brezillon